journal article·2013-12

Mechanism and Kinetics of Solid-State Transformation in High-Temperature Processed Linepipe Steel

Pei Yan, H. K. D. H. Bhadeshia

Publisher page

Abstract

A relatively new class of linepipe steels with yield strength greater than 500 MPa created for thermomechanical processing at temperatures in excess of 1473 K (1200 °C) has established a firm foothold in the market for modern, large diameter, and high-pressure gas transmission systems. The design concept for the steels takes advantage of the enhanced role which higher levels of niobium can play in very low carbon steels, during the plate manufacturing process. The transformation products observed after cooling have been interpreted in conflicting ways in the literature, using ambiguous terms which are not established rigorously. Revealing characterization experiments have therefore been conducted to establish that the principal transformation product grows by a displacive transformation mechanism, and that it is properly identified as bainite. The implications of this, on both the interpretation of microstructure and on the processing of the steel, are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. J.M. Gray, W.W. Wilkening, and L.G. Russell: Technical Report, U.S. Steel, USA, 1969.
2. K. Hulka and J.M. Gray: in Niobium 2001, TMS–AIME, Warrendale, Pennsylvania, 2001, pp. 587–612.
3. D. Stalheim: Proc. 5th HSLA Steels Conf. Iron and Steel Suppl., 2005, vol. 40, pp. 699–704.
4. Z. X. Qiao, Y. C. Liu, L. M. Yu, and Z. M. Gao. Incompleted bainitic transformation characteristics in an isochronally annealed 30CrNi3MoV steel. Journal of Alloys and Compounds, 474:334–340, 2009.10.1016/j.jallcom.2008.11.032 ↗
5. T. Araki, editor. Atlas for Bainitic Mcirostructure, volume 1. The Iron and Steel Institute of Japan, Tokyo, Japan, 1992.
6. Y.E. Smith, A.P. Coldren, and R.L. Cryderman: in Towards Improved Ductility and Toughness, Climax Molybdenum Co., Michigan, 1971, pp. 119–42.
7. M. C. Zhao, Y. Y. Shan, F. R. Xiao, K. Yang, and Y. H. Li. Investigation on the H2S-resistant behaviors of acicular ferrite and ultrafine ferrite. Materials Letters, 57:141–145, 2002.10.1016/S0167-577X(02)00720-6 ↗
8. M. C. Zhao, K. Yang, and Y. Y. Shan. Comparison on strength and toughness behaviors of microalloyed pipeline steels with acicular ferrite and ultrafine ferrite. Materials Letters, 57:1496–1500, 2003.10.1016/S0167-577X(02)01013-3 ↗
9. Y. Ito and M. Nakanishi. Study on charpy impact properties of weld metal with SAW. The Sumitomo Search, 15:42–62, 1976.
10. D.J. Abson: Technical Report IIW Doc. IX-1486-87, International Institute of Welding, Villepinte, France, 1987.
11. H.K.D.H. Bhadeshia: in International Trends in Welding Research, S.A. David and J.M. Vitek, eds., ASM International, Materials Park, OH, 1992, pp. 213–22.
12. S. S. Babu and H. K. D. H. Bhadeshia. Stress and the acicular ferrite transformations. Materials Science and Engineering A, A156:1–9, 1992.10.1016/0921-5093(92)90410-3 ↗
13. H. K. D. H. Bhadeshia. Rationalisation of shear transformations in steels. Acta Metallurgica, 29:1117–1130, 1981.10.1016/0001-6160(81)90063-8 ↗
14. H.K.D.H. Bhadeshia: Bainite in Steels, 1st edn. Institute of Materials, London, 1992.
15. H. S. Yang and H. K. D. H. Bhadeshia. Uncertainties in the dilatometric determination of the martensite–start temperature. Materials Science and Technology, 23:556–560, 2007.10.1179/174328407X176857 ↗
16. H.K.D.H. Bhadeshia: Software for Transformations in Steels. http://www.msm.cam.ac.uk/map/steel/programs/mucg46-b.html, 1982.
17. P. Yan and H.K.D.H. Bhadeshia: unpublished research, 2013.
18. M. Takahashi and H. K. D. H. Bhadeshia. Model for transition from upper to lower bainite. Materials Science and Technology, 6:592–603, 1990.10.1179/026708390790191521 ↗
19. H.K.D.H. Bhadeshia. Bainite in Steels, 2nd edn. Institute of Materials, London, 2001.
20. G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara, and T. Maki: Acta Mater, , 2007, vol. 55, pp. 5027–38.10.1016/j.actamat.2007.05.023 ↗
21. J. H. Jang, I. G. Kim, and H. K. D. H. Bhadeshia. Substitutional solution of silicon in cementite: a first-principles study. Computational Materials Science, 44:1319–1326, 2009.10.1016/j.commatsci.2008.08.022 ↗
22. E. Kozeschnik and H. K. D. H. Bhadeshia. Influence of silicon on cementite precipitation in steels. Materials Science and Technology, 24:343–347, 2008.10.1179/174328408X275973 ↗
23. H. K. D. H. Bhadeshia and D. V. Edmonds. Bainite in silicon steels: a new composition property approach i. Metal Science, 17:411–419, 1983.10.1179/030634583790420600 ↗
24. P. Cizek: 10th Int. Metall. Mater. Conf. METAL 2001, Paper 94, Tanger Ltd., Ostrava, Czech Republic, 2001.
25. E. V. Pereloma, C. Bayley, and J. D. Boyd. Microstructural evolution during simulated OLAC processing of a low–carbon microalloyed steel. Materials Science & Engineering A, 210:16–24, 1996.10.1016/0921-5093(95)10065-2 ↗
26. X. Zeng, J. Lu, and W. Wang. Effect of cooling rate of hot–deformed austenite on structure and property of X80 pipeline steel. Special Steel, 31:63–665, 2010.
27. E. Swallow and H. K. D. H. Bhadeshia. High resolution observations of displacements caused by bainitic transformation. Materials Science and Technology, 12:121–125, 1996.10.1179/026708396790165614 ↗
28. M. Peet and H. K. D. H. Bhadeshia. Surface relief due to bainite transformation at 473 K. Metallurgical & Materials Transactions A, 42:3344–3348, 2011.10.1007/s11661-011-0755-3 ↗
29. B. P. J. Sandvik and H. P. Nevalainen. Structure-property relationships in commercial low-alloy bainitic-austenitic steel with high strength, ductility, and toughness. Metals Technology, 8:213–220, 1981.10.1179/030716981803275992 ↗
30. P. H. Shipway and H. K. D. H. Bhadeshia. Mechanical stabilisation of bainite. Materials Science & Engineering A, 11:1116–1128, 1995.
31. H. K. D. H. Bhadeshia and D. V. Edmonds. The mechanism of bainite formation in steels. Acta Metallurgica, 28:1265–1273, 1980.10.1016/0001-6160(80)90082-6 ↗