Creep behavior of copper-chromium in-situ composite
Source abstract
Abstract
Creep deformation and fracture behaviors were investigated on a deformation-processed Cu-Cr in-situ composite over a temperature range of 200 °C to 650 °C. It was found that the creep resistance increases significantly with the introduction of Cr fibers into Cu. The stress exponent and the activation energy for creep of the composite at high temperatures (≥400 °C) were observed to be 5.5 and 180 to 216 kJ/mol, respectively. The observation that the stress exponent and the activation energy for creep of the composite at high temperatures (≥400 °C) are close to those of pure Cu suggests that the creep deformation of the composite is dominated by the deformation of the Cu matrix. The high stress exponent at low temperatures (200 °C and 300 °C) is thought be associated with the as-swaged microstructure, which contains elongated dislocation cells and subgrains that are stable and act as strong athermal obstacles at low temperatures. The mechanism of damage was found to be similar for all the creep tests performed, but the distribution and extent of damage were found to be very sensitive to the test temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. K.L. Lee, A.F. Whitehouse, and A.C.F. Cocks: ICCM 12, Paris, 1999.
2. K.L. Lee, H.E. Carroll, and A.F. Whitehouse: Mater. Sci. Technol., 2000, vol. 16, pp. 811–16.10.1179/026708300101508487 ↗
3. K.L. Lee, A.F. Whitehouse, P.J. Withers, and M.R. Daymond: Mater. Sci. Eng. A, 2003, vol. A348, pp. 208–16.10.1016/S0921-5093(02)00688-3 ↗
4. K.L. Lee, A.F. Whitehouse, A.M. Russell, K. Wongpreedee, S.I. Hong, and P.J. Withers: J. Mater. Sci., 2003, vol. 38 (16), pp. 3433–37.10.1023/A:1025196700785 ↗
5. K.L. Lee: Composite Part A, 2003, vol. 34 (12), pp. 1235–44.10.1016/S1359-835X(03)00251-3 ↗
6. A.I. Somov, N.A. Tikhonovskii, N.F. Andrievskaya, and V.A. Sverdlov: Phys. Met. Metallogr., 1978, vol. 46 (6), pp. 87–93.
7. L. Peng, X. Mao, K. Xu, and W. Ding: Rare Metals (English Edition) (China), 2002, vol. 21 (1), pp. 62–66.
8. C. Masudaj, N. Minakawa, and Y. Tanaka: JAERI-Rev. (Japan), 2002, vol. 2002–006, p. 96.
9. J.D. Embury and C.W. Sinclair: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 37–45.10.1016/S0921-5093(01)01106-6 ↗
10. J.S. Song, S.I. Hong, and H.S. Kim: J. Mater. Processing Technol., 2001, vol. 113 (1–3), pp. 610–16.10.1016/S0924-0136(01)00665-3 ↗
11. S. Onaka and M. Kato: Mater. Trans., JIM (Japan), 1999, vol. 40 (10), pp. 1102–07.10.2320/matertrans1989.40.1102 ↗
12. Y. Jin, K. Adachi, H.G. Suzuki, and T. Takeuchi: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2195–2203.10.1007/s11661-998-0044-y ↗
13. C. Biselli and D.G. Morris: Proc. 2nd Int. Conf. on Spray Forming, Swansea, United Kingdom, 13–15 Sept., 1993, Woodhead Publishing Limited, United Kingdom, pp. 293–302.
14. N.Y. Tang, D.M.R. Taplin, G.L. Dunlop, and A. Plumtree: Proc. Conf. on Creep and Fracture of Engineering Materials and Structures, Swansea, United Kingdom, 1–6 April, 1984, Pineridge Press Ltd., United Kingdom, vol. 1, pp. 235–44.
15. N.Y. Tang, D.M.R. Taplin, and G.L. Dunlop: Proc. Conf. on Strength of Metals and Alloys, Melbourne, Australia, 16–20 August, 1982, Pergamon Press, United Kingdom, vol. 2, pp. 665–70.10.1016/B978-1-4832-8423-1.50109-7 ↗
16. S.I. Hong and M.A. Hill: Mater. Sci. Eng. A, 2000, vol. 281, pp. 189–97.10.1016/S0921-5093(99)00728-5 ↗
17. S.I. Hong and M.A. Hill: Acta Mater., 1998, vol. 46, pp. 4111–22.10.1016/S1359-6454(98)00106-2 ↗
18. S.B. Biner and W.A. Spitzig: Mater. Sci. Eng. A, 1992, vol. 150 (2), pp. 213–20.10.1016/0921-5093(92)90114-G ↗
19. S.I. Hong and M.A. Hill: Acta Mater., 1998, vol. 46, pp. 4111–22.10.1016/S1359-6454(98)00106-2 ↗
20. A.M. Russell, L.S. Chumbley, and Y. Tian: Adv. Eng. Mater., 2000, vol. 2, pp. 11–22.10.1002/(SICI)1527-2648(200002)2:1/2<11::AID-ADEM11>3.0.CO;2-Z ↗
21. Sun Ig Hong: Scripta Mater., 1998, vol. 39, pp. 1685–91.10.1016/S1359-6462(98)00383-2 ↗
22. S. Sun: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1225–32.10.1007/s11661-001-0131-9 ↗
23. D.J. Chakrabarti and D.E. Laughlin: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, p. 1267.
24. Z.Y. Ma and S.C. Tjong: Mater. Sci. Eng. A, 2000, vol. 284, pp. 70–76.10.1016/S0921-5093(00)00797-8 ↗
25. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982, pp. 113–31.
26. C.J. Smithels: Metals Reference Book, Butterworth-Heineman, Boston, MA, 1992.
27. S.I. Hong, M.A. Hill, Y. Sakai, J.T. Wood, and J.D. Embury: Acta Metall. Mater., 1995, vol. 43, pp. 3313–23.10.1016/0956-7151(95)00050-6 ↗
28. S.I. Hong, J.H. Chung, and H.S. Kim: Key Eng. Mater., 2000, vol. 183, pp. 1207–12.10.4028/www.scientific.net/KEM.183-187.1207 ↗
29. S.E. Broyles, K.R. Anderson, J.R. Groza, and J.C. Gibeling: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1217–27.10.1007/BF02649859 ↗
30. M.S. Nagorka, G.E. Lucas, and C.G. Levi: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 873–81.10.1007/BF02649084 ↗
31. S.I. Hong, G.T. Gray, and J.J. Lewandowski: Acta Metall. Mater., 1993, vol. 41, pp. 2337–42.10.1016/0956-7151(93)90314-I ↗
32. S.I. Hong, G.T. Gray, and V.C. Vecchio: Mater. Sci. Eng. A, 1993, vol. 171, pp. 431–40.
33. H.D. Chandler: Mater. Sci. Eng. A, 1993, vol. 169, pp. 27–32.10.1016/0921-5093(93)90595-6 ↗
34. K.L. Lee: Ph.D. Thesis, Leicester University, Leicester, United Kingdom, 2003.
35. T.L. Dragone and W.D. Nix: Acta Metall., 1990, vol. 38, pp. 1941–46.10.1016/0956-7151(90)90306-2 ↗