Mapping the Strain Distributions in Deformed Bulk Metallic Glasses Using Hard X-Ray Diffraction
Source abstract
Abstract
The deformation behavior of Cu45 Zr46.5 Al7Ti1.5 bulk metallic glass (BMG) under bending was investigated in-situ using high-energy X-ray synchrotron diffraction. Samples were bent using two different benders with radii of 10 and 20 mm. The components of the strain tensor were determined from the change of positions of the first maximum of the diffracted intensity in reciprocal space. The procedure of data treatment was improved by the introduction of direct beam off-center correction. Comparing results for the two different bending radii, we found that the zero stress region does not necessarily lay within the central part of the specimen. Bending with smaller radius resulted in symmetric strain distribution, whereas a larger bending radius revealed strong asymmetry. Furthermore, bending with a smaller radius (10 mm) shows steeper strain gradients as compared with the situation in which the larger bending radius (20 mm) was used. Using a smaller bending radius implies reaching higher tensile/compressive stresses and reveals the signs of the plastic deformation, which are demonstrated as a saturation of elastic strains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
2. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
3. C.A. Schuh, T.C. Hufnagel, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗
4. B.C. Menzel and R.H. Dauskardt: Scripta Mater., 2006, vol. 55, pp. 601–04.10.1016/j.scriptamat.2006.06.015 ↗
5. T. Egami and S.J.L. Billinge: Underneath the Bragg Peaks: Structural Analysis of Complex Materials. Pergamon Press, Elsevier, Oxford, United Kingdom, 2003.
6. H.F. Poulsen, J.A. Wert, J. Neuefeind, V. Honkimäki, and M. Daymond: Nat. Mater., 2005, vol. 4, pp. 33–36.10.1038/nmat1266 ↗
7. T.C. Hufnagel, R.T. Ott, and J. Almer: Phys. Rev. B, 2006, vol. 73, p. 064204.10.1103/PhysRevB.73.064204 ↗
8. J. Das, M. Bostrom, N. Mattern, A. Kvick, A.R. Yavari, A.L. Greer, and J. Eckert: Phys. Rev. B, 2007, vol. 76, p. 092203.10.1103/PhysRevB.76.092203 ↗
9. X.D. Wang, J. Bednarcik, K. Saksl, H. Franz, Q.P. Cao, and J.Z. Jiang: Appl. Phys. Lett., 2007, vol. 91, p. 081913.10.1063/1.2773945 ↗
10. M. Stoica, J. Das, J. Bednarcik, H. Franz, N. Mattern, W.H. Wang, and J. Eckert: J. Appl. Phys., 2008, vol. 104, p. 013522.10.1063/1.2952034 ↗
11. P.E. Donovan: Acta Metallurgica, 1989, vol. 37, pp. 445–56.10.1016/0001-6160(89)90228-9 ↗
12. H.A. Bruck, T. Christman, A.J. Rosakis, and W.L. Johnson: Scripta Metall. Mater., 1994, vol. 30, pp. 429–34.10.1016/0956-716X(94)90598-3 ↗
13. A. Katsuya, A. Inoue, and K. Amiya: Int. J. Rapid Solidif., 1996, vol. 9, pp. 137–58.
14. A. Inoue, A. Katsuya, K. Amiya, and T. Masumoto: Mater. Trans. JIM, 1995, vol. 36, pp. 802–09.10.2320/matertrans1989.36.802 ↗
15. R.D. Conner, W.L. Johnson, N.E. Paton, and W.D. Nix: J. Appl. Phys., 2003, vol. 94, pp. 904–11.10.1063/1.1582555 ↗
16. Conner R.D., Yi Li, W.D. Nix, and W.L. Johnson: Acta Mater., 2004, vol. 52, pp. 2429–34.10.1016/j.actamat.2004.01.034 ↗
17. L.Y. Chen, Q. Ge, S. Qu, and J.Z. Jiang: Scripta Mater., 2008, vol. 59, pp. 1210–13.10.1016/j.scriptamat.2008.08.021 ↗
18. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch, and D. Häusermann: High Press. Res., 1996, vol. 14, pp. 235–48.10.1080/08957959608201408 ↗
19. G.E. Dieter: Mechanical Metallurgy, 3rd ed, McGraw-Hill, London 1988, p. 44.
20. Y. Suzuki, J. Haimovich, and T. Egami: Phys. Rev. B, 1987, vol. 35, pp. 2162–68.10.1103/PhysRevB.35.2162 ↗
21. W. Dmowski and T. Egami: J. Mater. Res., 2007, vol. 22, pp. 412–18.10.1557/jmr.2007.0043 ↗
22. Y. Zhang and A.L. Greer: Appl. Phys. Lett., 2006, vol. 89, p. 071907.10.1063/1.2336598 ↗
23. F.O. Mear, G. Vaughan, A.R. Yavari, and A.L. Green: Phil. Mag. Lett., 2008, vol. 88, pp. 757–66.10.1080/09500830802235776 ↗
24. A.R. Yavari, A. Le Moulec, A. Inoue, N. Nishiyama, N. Lupu, E. Matsubara, W.J. Botta, G. Vaughan, M. di Michiel, and Å. Kvick: Acta Mater., 2005, vol. 53, pp. 1611–19.10.1016/j.actamat.2004.12.011 ↗