Maintaining High Strength at High Temperature in a Mg-Y-Zn-Gd Alloy by Heat Treatments and Severe Deformation Processing
Source abstract
Abstract
The evolution of mechanical properties between room temperature and 573 K (300 °C) has been studied in a Mg-Y-Zn-Gd alloy under different heat treated and thermomechanically processed conditions. The different distributions of longperiodstackingordered phase and precipitation of lamellar Gd-rich phase, modified by severe deformation processing, lead to strengths ranging between 112 and 175 MPa at 573 K (300 °C). Microstructures have been evaluated under different processing conditions and comparison made with a similar alloy without Gd previously studied. Although the alloys can achieve similar room temperature strengths, only the Gd-containing alloy can retain sufficient high strength at temperatures above 473 K (200 °C). This is due to the strengthening effect of the lamellar Gd-rich precipitates that are broken and redistributed during the severe deformation processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M.O. Pekguleryuz, and A.A. Kaya: Adv. Eng. Mat., 2003, vol. 5, pp. 866-878.10.1002/adem.200300403 ↗
2. M. Suzuki, H. Sato, K. Maruyama, and H. Oikawa: Mater. Sci. Eng. A, 1998, vol. 252, pp. 248-255.10.1016/S0921-5093(98)00662-5 ↗
3. M. Suzuki, H. Sato, K. Maruyama, and H. Oikawa; Mater. Sci. Eng. A, 2001, vol. 319-321, pp. 751-755.10.1016/S0921-5093(01)01005-X ↗
4. K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans. A, 2002, vol. 33, pp. 875-882.10.1007/s11661-002-0157-7 ↗
5. M. Suzuki, T. Kimura, J. Koike, and K. Maruyama: Scr. Mater., 2003, vol. 48, pp. 997-1002.10.1016/S1359-6462(02)00590-0 ↗
6. M. Suzuki, T. Kimura, J. Koike, and K. Maruyama: Mater. Sci. Eng. A, 2004, vol. 387-389, pp. 706-709.10.1016/j.msea.2003.12.071 ↗
7. J.F. Nie, X. Gao, and S.M. Zhu: Scripta Mater., 2005, vol. 53, pp. 1049–53.10.1016/j.scriptamat.2005.07.004 ↗
8. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and G.L. Dunlop: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2036-2041.10.1007/s11661-009-9896-z ↗
9. S.M. Zhu, M.A. Gibson, M.A. Easton, and J.F. Nie: Scr. Mater., 2010, vol. 63, pp. 698-703.10.1016/j.scriptamat.2010.02.005 ↗
10. G. Garces, P. Pérez, S. González, and P. Adeva: Z. Metall., 2006, vol. 97, pp. 404-408.10.3139/146.101231 ↗
11. M. Matsuda, S. Li, Y. Kawamura, Y. Ikuhara, and M. Nishida: Mater. Sci. Eng. A, 2005, vol. 393, pp. 269-274.10.1016/j.msea.2004.10.040 ↗
12. Y. Chino, M. Mabuchi, S. Hagiwara, H. Iwasaki, A. Yamamoto, and H. Tsubakino: Scr. Mater., 2004, vol. 51, pp. 711-714.10.1016/j.scriptamat.2004.06.007 ↗
13. Y. Kawamura, T. Kasahara, S. Izumi, and M. Yamasaki: Scr. Mater., 2006, vol. 55, pp. 453-456.10.1016/j.scriptamat.2006.05.011 ↗
14. M. Matsuda, S. Ii, Y. Kawamura, Y. Ikuhara, and M. Nishida: Mater. Sci. Eng. A, 2004, vol. 386, pp. 447-452.10.1016/S0921-5093(04)01017-2 ↗
15. Z.P. Luo, and S.Q.J. Zhang: Mater. Sci. Letter, 2000, vol. 19, pp. 813-815.10.1023/A:1006793411506 ↗
16. Y.M. Zhu, A.J. Morton, and J.F. Nie: Acta Mater., 2010, vol. 58, pp. 2936-2947.10.1016/j.actamat.2010.01.022 ↗
17. K. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda, and Y. Umakoshi: Acta Mater., 2010, vol. 58, pp. 6282–93.10.1016/j.actamat.2010.07.050 ↗
18. M. Yamasaki, K. Hashimoto, K. Hagihara, and Y. Kawamura: Acta Mater., 2011, vol. 59, pp. 3646-3658.10.1016/j.actamat.2011.02.038 ↗
19. E. Oñorbe, G. Garces, P. Pérez, and P. Adeva: J. Mater. Sci., 2012, vol. 47, pp. 1085-1093.10.1007/s10853-011-5899-4 ↗
20. M. Hirano, M. Yamasaki, K. Hagihara, K. Higashida, and Y. Kawamura: Mater. Trans., 2010, vol. 51, pp. 1640-1647.10.2320/matertrans.MAW201026 ↗
21. G. Garces, M.A. Muñoz-Morris, D.G. Morris, P. Perez, and P. Adeva: Mater. Sci. Eng. A, 2014, vol. 614, pp. 96-105.10.1016/j.msea.2014.07.012 ↗
22. G. Garces, M. Maeso, I. Todd, P. Pérez, and P. Adeva: J. Alloys Comp., 2007, vol. 432, pp. 10-14.10.1016/j.jallcom.2006.06.009 ↗
23. E. Oñorbe, G. Garces, F. Dobes, P. Pérez, and P. Adeva: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2869-2883.10.1007/s11661-013-1628-8 ↗
24. A. Inoue, Y. Kawamura, M. Matsushita, K. Hayashi, and J.Koike: J. Mater. Res., 2001, vol. 16, pp. 1894–1900.10.1557/JMR.2001.0260 ↗
25. Y. Kawamura, and M. Yamasaki: Mater. Trans., 2007, vol. 48, pp. 2986-2992.10.2320/matertrans.MER2007142 ↗
26. M. Yamasaki, M. Sasaki, M. Nishijima, K. Hiraga, and Y. Kawamura: Acta Mater., 2007, vol. 55, pp. 6798-6805.10.1016/j.actamat.2007.08.033 ↗
27. Y. Jono, M. Yamasaki, and Y. Kawamura: Acta Mater., 2015, vol. 82, pp. 198-211.10.1016/j.actamat.2014.08.050 ↗
28. G. Garces, G. Requena, D. Tolnai, P. Pérez, P. Adeva, A. Stark, N. Schell: J. Mater. Sci., 2014, vol. 49, pp. 2714–22.10.1007/s10853-013-7967-4 ↗
29. J.F. Nie, K. Oh-ishi, X. Gao, and K. Hono: Acta Mater., 2008, vol. 56, pp. 6061-6076.10.1016/j.actamat.2008.08.025 ↗
30. M. Kouzeli, and A. Mortensen: Acta Mater., 2002, vol. 50, pp. 39-51.10.1016/S1359-6454(01)00327-5 ↗
31. R.J. Arsenault, L. Wang, and C.R. Feng: Acta Metall., 1991, vol. 39, pp. 47-57.10.1016/0956-7151(91)90327-W ↗
32. G. Garces, M.A. Muñoz-Morris, D.G. Morris, J.A. Jiménez, P. Pérez, and P. Adeva: Intermetallics, 2014, vol. 55, pp. 167–76.10.1016/j.intermet.2014.07.015 ↗