Development of Cold-Rolled Dual-Phase Steels with Tensile Strength Above 1000 MPa and Good Bendability
Source abstract
Abstract
This paper presents the most important results of the study oriented on development of low-silicon (<0.03Si), precipitation-strengthened, fine-grained, cold-rolled dual-phase (DP) steels with tensile strength greater than 1000 MPa, primarily intended for the automotive industry. For this purpose, extensive systematic investigations were conducted with the aim to optimize the composition/processing conditions with regard to the microstructural effects on tensile properties and bendability of DP steels. Within this study, influence of the addition of Mn, Cr, Mo and/or both Mo and Ti on the microstructure and tensile properties of eight steels molded in the form of ~20 kg ingots processed by controlled rolling has been investigated. The effect of simulated coiling temperature on hot-rolled steels followed by cold rolling and intercritical annealing at temperatures 1023 K and 1073 K (750 °C and 800 °C) as well as the interaction between ferrite recrystallization and austenite formation were examined. Investigation of the effect of intercritical annealing on the structure–property relationships was carried out on steels in both the hot-rolled and cold-rolled states. It was found that in spite of strength above 1000 MPa, good bendability (steel strip may have been bent to 180 deg at radius of 0.5 mm) can be achieved in the cold-rolled intercritically annealed steel with nominal composition 0.15-C-1.2Mn-0.02Si-0.2Mo-0.1Ti by more or less homogeneous distribution of fine Ti precipitates (<5 nm) within fine ferrite grains (<2 μm) and about 35 pct martensite volume fraction in the microstructure of DP steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. D.K. Matlock and J.G. Speer, Third Generation of AHSS: Microstructure Design Concepts, Microstructure and Texture in Steels, Springer, London, 2009, pp. 185–206.10.1007/978-1-84882-454-6_11 ↗
2. World Auto Steel Program, Future Steel Vehicle, Overview Report, 30, 5. http://www.autosteel.org/Programs.aspx.
3. Advanced High-Strength Steel Application Guidelines Version 5.0, WorldAutosteelSteel, May 2014, pp. 2.2–2.4. and p. 3–33. http://www.worldautosteel.org/projects/advanced-high-strength-steel-application-guidelines/
4. J.Y. Koo and G. Thomas: in Design of Duplex Low Carbon Steels for Improved Strength: Weigth Applications, A.T. Davenport, ed., AIME, New York, 1977, pp. 40–55.10.2172/5245018 ↗
5. K. Hasegawa, K. Kawamura, T. Urabe, and Y. Hosoya, ISIJ Int., 2004, vol. 44, pp. 603–09.10.2355/isijinternational.44.603 ↗
6. K. Yamazaki, Y. Mizuyama, M. Oka, H. Tsuchiya, and H. Yasuda: Nippon Steel Tech. Rep., 1995, vol. 64, pp. 37–44.
7. J. R. Fekete, J. N. Hall, D. J. Meuleman, and M. Rupp: Iron Steel Tech., 2008, vol. 5, no. 10, pp. 55–64.
8. N. Matsumura and M. Tokizane: Trans. ISIJ, 1984, vol. 24, pp. 648–54.10.2355/isijinternational1966.24.648 ↗
9. H. Azizi-Alizamini, M. Militzer and W.J. Poole: ISIJ Int., 2011, vol. 51, pp. 958–64.10.2355/isijinternational.51.958 ↗
10. H. Shirasawa, Y. Tanaka, M. Miyahara and Y. Baba: Trans. ISIJ, 1986, vol. 26, pp. 310–14.10.2355/isijinternational1966.26.310 ↗
11. Cai M.H., Ding H., Lee Y.K., Tang Z.Y., Zhang J.S. (2011) ISIJ Int 51:476–8110.2355/isijinternational.51.476 ↗
12. K. Eberle, P. Cantinieaux, and P. Harlet: Steel Res., 1999, vol. 70, no. 6, pp. 233–38.10.1002/srin.199905632 ↗
13. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Trans. A, 2001, vol. 32A, pp. 2905–08.10.1007/s11661-001-1042-5 ↗
14. M. Manohar: J. Laser Appl. 2006, vol. 18, no. 2, pp. 101–112.10.2351/1.2193173 ↗
15. N. Sreenivasan, M. Xia, S. Lawson, and Y. Zhou: J. Eng. Mater. Technol., 2008, vol. 130, pp. 0410041-0410049.10.1115/1.2969246 ↗
16. T. Ogawa, N. Maruyama, N. Sugiura, and N. Yoshinaga: ISIJ Int., 2010, vol. 50, pp. 469–75.10.2355/isijinternational.50.469 ↗
17. N. Peranio, Y.J. Li, F. Roters, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4161–68.10.1016/j.msea.2010.03.028 ↗
18. Baltazar Hernandez V.H., Nayak S.S., Zhou Y. (2011) Metall. Mater. Trans. A 42A:3115–312910.1007/s11661-011-0739-3 ↗
19. R.R. Mohanty and O.A. Girina: Mater. Sci. Forum, 2012, vol. 706-709, pp. 2112–17.10.4028/www.scientific.net/MSF.706-709.2112 ↗
20. M. Kulakov, W.J. Poole and M. Militzer: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3564–76.10.1007/s11661-013-1721-z ↗
21. M.D. Taylor, K.S. Choi, X. Sun, D.K. Matlock, C.E. Packard, L.Xu, and F. Barlat: Mater. Sci. Eng. A, 2014, vol. 597, pp. 431–39.10.1016/j.msea.2013.12.084 ↗
22. T.F. Majka, D.K. Matlock and G. Krauss: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1627–37.10.1007/s11661-002-0172-8 ↗
23. G. Avramovic-Cingara, Y. Ososkov, M.K. Jain and D.S. Wilkinson: Metall. Trans. A, 2009, vol. 40A, pp. 3117–27.10.1007/s11661-009-0030-z ↗
24. D. Rèche, T. Sturel, A.F. Gourgues-Lorenzon, and J. Besson: Proceedings of 18th ECF Fracture of Materials and Structures from Micro to Macro Scale, Aug 2010, Dresden, Germany. DVM, 8 p.
25. D. Hejazi, A.J. Haq, N. Yazdipour, D.P. Dunne, A. Calka, F. Barbaro and E.V. Pereloma: Mater. Sci. Eng. A, 2012, vol. 528, pp. 40–49.10.1016/j.msea.2012.04.076 ↗
26. R.G. Davies: Met. Trans. A, 1978, vol. 9, pp. 671–79.10.1007/BF02659924 ↗
27. A.R. Marder: Metall. Trans. A, 1981, vol. 12A, pp. 1569–79.10.1007/BF02643562 ↗
28. T. Irie, S. Satoh, K. Hashigichi, I. Takahashi and O. Hashimoto: Trans. ISIJ, 1981, vol. 21, pp. 793-801.10.2355/isijinternational1966.21.793 ↗
29. Osawa K, Suzuki Y, Tanaka S (2003) Kawasaki Steel Tech. Rep., 48:9–14
30. Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto, and E. Maeda: ISIJ Int., 2004, vol. 44, pp. 1945–51.10.2355/isijinternational.44.1945 ↗
31. C.Y. Chen, H.W. Yen, F.H. Kao,W.C. Li, C.Y. Huang, J.R. Yang and S.H.Wang: Mater. Sci. Eng. A, 2009, vol. 499, pp. 162–166.10.1016/j.msea.2007.11.110 ↗
32. X. Sun and Q. Yong: International Seminar on Applications of Mo in Steels, June 27th–28th, 2010 Beijing, China, pp. 61–74.
33. Yen HW, Chen PY, Huang CY, Yang JR (2011) Acta Materialia 59:6264–7410.1016/j.actamat.2011.06.037 ↗
34. D.B. Park, M.Y. Huh, J.H. Shim, J.Y. Suh, K.H. Lee and W.S. Jung: Mater. Sci. Eng. A, 2013, vol. 560, pp. 528–34.10.1016/j.msea.2012.09.098 ↗
35. Z. Wang, X. Sun, Z. Yang, Q. Yong, C. Zhang, Z. Li and Y. Weng: Mater. Sci. Eng. A, 2013, vol. 573, pp. 84–91.10.1016/j.msea.2013.02.056 ↗
36. B.H. Hu, Q.W. Cai and H.B. Wu: J. Iron Steel Res. Int., 2013, vol. 20, no. 7, pp. 69–77.10.1016/S1006-706X(13)60129-6 ↗
37. Y.W. Kim, S.W. Song, S.J. Seo, S.G. Hong and C.S. Lee: Mater. Sci. Eng. A, 2013, vol. 565, pp. 430–38.10.1016/j.msea.2012.12.055 ↗
38. A S. Mukherjee, I.B. Timokhina, C. Zhu, S.P. Ringer and P.D. Hodgson: Acta Mater., 2013, vol. 61, pp. 2521–30.10.1016/j.actamat.2013.01.028 ↗
39. G. Jha, S. Das, S. Sinha, A. Lodh, A. Haldar: Mater. Sci. Eng. A, 2013, vol. 561, pp. 394–402.10.1016/j.msea.2012.10.047 ↗
40. C.Y. Chen, C.C. Chen and J.R. Yang: Mater. Charact., 2014, vol. 88, pp. 69–79.10.1016/j.matchar.2013.11.016 ↗
41. I. Machida, M. Narita, R. Kureura, M. Morita, N. Aoyagi, and M. Sano: SAE Tech. Paper 940536, 1994. doi:10.4271/940536.10.4271/940536 ↗
42. R. Soto, W. Saikaly, X. Bano, C. Issartel, G. Rigaut and A. Charai: Acta Mater., 1999, vol. 47, pp. 3475–81.10.1016/S1359-6454(99)00190-1 ↗
43. W. Saikaly, X. Bano, C. Issartel, G. Rigaut, L. Charrin, and A. Charaï: Met. Mat. Trans. A, 2001, vol. 32A, pp. 1939–47.10.1007/s11661-001-0006-0 ↗
44. Y.L. Kang, Q.H. Han, X.M. Zhao, and M.H. Cai: Materials and Design, 2013, vol. 40, pp. 331–339.10.1016/j.matdes.2012.07.068 ↗
45. J. Hu, L.-X. Du, J.-J. Wang, C.-R. Gao, T.-Z. Yang, A.-Y. Wang, and R.D.K. Misra: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4937–47.10.1007/s11661-013-1839-z ↗
46. G. Xu, X. Gan, G. Ma, F. Luo, and H. Zou, Materials and Design, 2010, 31, pp. 2891–96.10.1016/j.matdes.2009.12.032 ↗
47. Beidokhti B, Koukabi AH, Dolati A (2009) Mater. Charact. 60:225–3310.1016/j.matchar.2008.09.005 ↗
48. C. Ouchi, T. Sampei and I. Kozasu: Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 214-222.10.2355/isijinternational1966.22.214 ↗
49. http://rsbweb.nih.gov/ij/
50. M. Calcagnotto, D. Ponge, and D. Raabe, Metall. Mater. Trans. A, 2012, vol. 43A, pp. 37–46.10.1007/s11661-011-0828-3 ↗
51. W.B. Lee, S.G. Hong, C.G. Park, and S.H. Park: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1689–98.10.1007/s11661-002-0178-2 ↗
52. Y. Matsumura and H. Yada: Trans. ISIJ, 1987, vol. 27, pp. 492–98.10.2355/isijinternational1966.27.492 ↗
53. S.F. Medina and C.A. Hernandez: Acta mater. 1996, vol. 44, pp. 149–54.10.1016/1359-6454(95)00152-2 ↗
54. A. Schmitz, J. Neutjens, J.C. Herman, and V. Leroy: Proc. Int. Conf. on Mechanical Working and Steel Processing, 1998, Pittsburgh, Warrendale, PA, ISS, pp. 295–309.
55. N. Isasti, D. Jorge-Badiola, M.L. Taheri, P. Uranga, Metall. Mater. Trans. A, 2013, vol. 44, pp. 3552–63.10.1007/s11661-013-1738-3 ↗
56. M.R. Hickson, P.J. Hurley, R.K. Gibs, G.L. Kelly, P.D. Hodgson, Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1019–26.10.1007/s11661-002-0203-5 ↗
57. K. Mukherjee, S.S. Hazra and M. Militzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2145–59.10.1007/s11661-009-9899-9 ↗
58. S. Patra, S. Roy, V. Kumar, A. Haldar, and D. Chakrabarti: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2575–90.10.1007/s11661-011-0668-1 ↗
59. C. Zheng, D. Raabe, and D. Li, Acta Mater., 2012, vol. 60, pp. 4768–79.10.1016/j.actamat.2012.06.007 ↗
60. M. Militzer and Y. Brechet: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2273–82.10.1007/s11661-009-9926-x ↗
61. S.C. Hong, S.H. Lim, H.S. Hong, K.J. Lee, D.H. Shin and K.S. Lee: Mater. Sci. Eng. A, 2003, vol. 355, pp. 241–48.10.1016/S0921-5093(03)00071-6 ↗
62. H. Dong and X. Sun: Ultra-Fine Grained Steels, (Based on an original Chinese edition: Metallurgical Industry Press, 2003), Springer, Heidelberg, 2009 pp. 86–136.10.1007/978-3-540-77230-9_3 ↗
63. J. Du, M. Strangwood, and C.L. Davis: J. Mater. Sci. Technol., 2012, vol. 28 pp. 878–88.10.1016/S1005-0302(12)60146-7 ↗
64. P. Mitchell, P. Hart and W. Morrison: Proc. Int. Conf. on Microalloying ’95, Pittsburgh, PA, USA, June 1995, pp. 149–162.
65. R. Valentini, A. Solina, S. Matera and P. De Gregorio: Metall. Trans. A, 1996, vol. 27A, pp. 3773–80.10.1007/BF02595626 ↗
66. Subramanian SV, Prikryl M, Gaulin BD, Clifford DD, Benincasa S, O’reilly I (1994) ISIJ Int., 34:61–69.10.2355/isijinternational.34.61 ↗
67. X. Huo, X. Mao, and S. Lü: J. Iron Steel Res. Int., 2013, vol. 20, no. 9, pp. 105-110.10.1016/S1006-706X(13)60164-8 ↗
68. Toroghinejad M.R., Dini Gh. (2006) Int. J. ISSI . 3(2): 1–6.
69. D.Z. Yang, E.L. Brown, D.K. Matlock and G. Krauss: Metall. Trans. A, 1985, vol. 16A, pp. 1385–92.10.1007/BF02658671 ↗
70. N. Nakada, Y. Arakawa, K.S. Park, T. Tsuchiyama, and S. Takaki: Mater. Sci. Eng. A, 2012, vol. 553, pp. 128–33.10.1016/j.msea.2012.06.001 ↗
71. P. Li, J. Li, Q. Meng, W. Hu, and D. Xu: J. Alloys Compd., 2013, vol. 578, pp. 320–27.10.1016/j.jallcom.2013.05.226 ↗
72. H. Azizi-Alizamini, M. Militzer and W.J. Poole: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1544–57.10.1007/s11661-010-0551-5 ↗
73. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3363–75.10.1007/s11661-004-0173-x ↗
74. A. Karmakar, A. Karami, S. Patra, and D. Chakrabarti: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2041–52.10.1007/s11661-012-1556-z ↗
75. R.R. Mohanty, O.A. Girina, and N.M. Fonstein: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3680–90.10.1007/s11661-011-0753-5 ↗
76. G. Speich, V. Demarest, and R. Miller: Metall. Mater. Trans. A, 1981, vol. 12, pp. 1419-28.10.1007/BF02643686 ↗
77. M.D. Taylor, D.K. Matlock, E. De Moor, and J.G. Speer: JMEPEG, 2014, vol. 23, pp. 3685–94.10.1007/s11665-014-1154-x ↗
78. Docol DP/DL, Cold reduced dual phase steels intended for US market, SSAB Swedish Steel, Inc., http://www.ssab.com/Global/Docol/datasheets_docol/en/224_Docol%20DP,%20DL.pdf
79. T. Sirinakorn, V. Uthaisangsuk, and S. Srimanosaowapak, J. Met. Mater. Miner., 2014, vol. 24, no.1, pp. 13–20.
80. Chung K., Ma N., Park T., Kim D., Yoo D., Kim C. (2011) Int. J. Plasticity 27:52–8110.1016/j.ijplas.2010.03.006 ↗
81. S.B. Lee, Y.R. Cho, and K.G. Chin: Posco Technical Report, 2007, vol. 10, pp. 104–115. 1485–1511
82. G. Rosenberg, I. Sinaiová, and L'. Juhar: Mater. Sci. Eng. A, 2013, vol. 582, pp. 347–58.10.1016/j.msea.2013.06.035 ↗
83. General Motors-AISI AAC Advanced High Strength Steel Repairability Study Phase II Final Report, http://www.autosteel.org/Research/Safety.aspx