journal article·2015-09

Mechanical Properties and Thermal Shock Resistance of Alumina/Hexagonal Boron Nitride Composite Refractories

Feng Liang, Zhengliang Xue, Lei Zhao, Haijun Zhang, Shaowei Zhang

Publisher page

Abstract

Alumina/hexagonal boron nitride (Al2O3/h-BN) composite refractories were fabricated with various h-BN contents, to study the effects on the mechanical properties and thermal shock resistance (TSR) of the composite refractories. The results showed that the mechanical properties of the composite refractories, including fracture strength, Young’s modulus, fracture toughness, work of fracture, and decreased with the increase of h-BN amount. However, the residual flexural strength ratio after thermal shock test was increased with increasing the h-BN content, showing an improvement of TSR. The resistance to fracture propagation caused by the thermal stresses was increased, as supported by the RIV and RST parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Boron and Carbon Nanomaterials Research · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. E. M. M. EWAIS: J. Ceram. Soc. Jpn., 2004, vol. 112, pp. 517-32.10.2109/jcersj.112.517 ↗
2. C.F. Cooper, I.C. Alexander, and C.J. Hampson: Br. Ceram. Trans., 1985, vol. 84, pp. 57-62.
3. X. Peng, L. Li, and D. Peng: Refractories, 2003, vol. 37, pp. 355-7.
4. Z. Boquan, Z. Wenjie, and Y. Yashuang: Refractories, 2006, vol. 40, pp. 90-5.
5. S. Tamura, T. Ochiai, S. Takanaga, T. Kanai, and H. Nakamura: Proceedings of the 8th UNITECR-03, Osaka, Japan, 2003, pp. 19–22.
6. A. Lipp, K. A. Schwetz, and K. Hunold: J. Eur. Ceram. Soc., 1989, vol. 5, pp. 3-9.10.1016/0955-2219(89)90003-4 ↗
7. V. Salles, S. Bernard, R. Chiriac, and P. Miele: J. Eur. Ceram. Soc., 2012, vol. 32, pp. 1867-71.10.1016/j.jeurceramsoc.2011.09.002 ↗
8. W. Ruigang, P. Wei, J. Mengning, C. Jian, and L. Yongming: Mater. Sci. Eng. B, 2002, vol. 90, pp. 261-8.10.1016/S0921-5107(01)01048-0 ↗
9. G.J. Zhang, J.F. Yang, M. Ando1, T. Ohji, and S. Kanzaki: J. Am. Ceram. Soc., 2004, vol. 87, pp. 296–98.10.1111/j.1551-2916.2004.00296.x ↗
10. A. K. Basu, A. Mitra, and S. Ghatak: Ceram. Int., 2006, vol. 32, pp. 213-9.10.1016/j.ceramint.2005.02.003 ↗
11. H. Liu and H. Tian: J. Eur. Ceram. Soc., 2012, vol. 32, pp. 2505-12.10.1016/j.jeurceramsoc.2012.02.009 ↗
12. W.S. Coblenz and D. Lewis III: J. Am. Ceram. Soc., 1988, vol. 71, pp. 1080-5.10.1111/j.1151-2916.1988.tb05795.x ↗
13. K.S. Mazdiyasni and R. Ruh: J. Am. Ceram. Soc., 1981, vol. 64, pp. 415-9.10.1111/j.1151-2916.1981.tb09881.x ↗
14. E.H. Lutz and M.V. Swain: J. Am. Ceram. Soc., 1992, vol. 75, pp. 67-70.10.1111/j.1151-2916.1992.tb05443.x ↗
15. S. Hayama, M. Ozawa, and S. Suzuki: J. Ceram. Soc. Jpn., 1996, vol. 104, pp. 828-31.10.2109/jcersj.104.828 ↗
16. E. Maeda, K. Aratani, T. Kawasaki, and H. Kishidaka: J. Ceram. Soc. Jpn., 1980, vol. 88, pp. 523-31.
17. Y. Li, G. Qiao, and Z. Jin: Mater. Res. Bull., 2002, vol. 37, pp. 1401-09.10.1016/S0025-5408(02)00786-9 ↗
18. G.J. Zhang, J.F. Yang, M. Ando, T. Ohji, and S. Kanzaki: Acta Mater., 2004, vol. 52, pp. 1823-35.10.1016/j.actamat.2003.12.021 ↗
19. P. Rutkowski, W. Piekarczyk, L. Stobierski, and G. Górny: J. Therm. Anal. Calorim., 2014, vol. 115, pp. 461-6.10.1007/s10973-013-3246-5 ↗
20. M. Radovic, E. Lara-Curzio, and L. Riester: Mater. Sci. Eng. A, 2004, vol. 368, pp. 56-70.10.1016/j.msea.2003.09.080 ↗
21. R.W. Davidge and G. Tappin: J. Mater. Sci., 1967, vol. 3, pp. 165-73.10.1007/BF00585484 ↗
22. D.P.H. Hasselman: J. Am. Ceram. Soc., 1969, vol. 52, pp. 600-4.10.1111/j.1151-2916.1969.tb15848.x ↗
23. D.P.H. Hasselman: J. Am. Ceram. Soc., 1963, vol. 46, pp. 535-40.10.1111/j.1151-2916.1963.tb14605.x ↗
24. H. Fan, Y. Li, and S. San: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3177-85.10.1016/j.msea.2010.12.066 ↗
25. H. Fan, Y. Li, Y. Huang, S. Sang, Y. Li, and L. Zhao: Mater. Sci. Eng. A, 2012, vol. 545, pp. 148-54.10.1016/j.msea.2012.03.013 ↗
26. Z. Zhang, L. Teng, and W. Li: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 319-26.10.1016/j.jeurceramsoc.2006.04.184 ↗
27. S. Zhang, N.J. Marriott, and W.E. Lee: J. Eur. Ceram. Soc., 2001, vol. 21, pp. 1037-47.10.1016/S0955-2219(00)00308-3 ↗
28. A.S. Gokce, C. Gurcan, S. Ozgen, and S. Aydin: Ceram. Int., 2008, vol. 34, pp. 323-30.10.1016/j.ceramint.2006.10.004 ↗
29. E. Karamian, A. Monshi, A. Bataille, and A. Zadhoush: J. Eur. Ceram. Soc., 2011, vol. 31, pp. 2677-85.10.1016/j.jeurceramsoc.2011.02.019 ↗
30. H. Wang, Y. Li, S. Sang, S. Jin, Y. Xu, K. Yang, and S. Yu: Ceram. Int., 2014, vol. 40, pp. 15783-93.10.1016/j.ceramint.2014.07.104 ↗
31. T. Kusunose, Y.H. Kim, T. Sekino, T. Matsumoto, N. Tanaka, T. Nakayama, and K. Niihara: J. Mater. Res., 2005, vol. 20, pp. 183-90.10.1557/JMR.2005.0010 ↗
32. L. Zou, Y. Huang, and C. Wang: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 2861-8.10.1016/j.jeurceramsoc.2003.08.006 ↗
33. R. Shuba and I.W. Chen: J. Am. Ceram. Soc., 2006, vol. 89, pp. 2147-53.10.1111/j.1551-2916.2006.01022.x ↗
34. G. Zhang and T. Ohji: J. Am. Ceram. Soc., 2001, vol. 84, pp. 1475-9.10.1111/j.1151-2916.2001.tb00863.x ↗
35. J.H. She, J.F. Yang, and T. Ohji: J. Mater. Sci. Lett., 2003, vol. 22, pp. 331-3.10.1023/A:1022678606160 ↗
36. C. Aksel and P.D. Warren: J. Eur. Ceram. Soc., 2003, vol. 23, pp. 301-8.10.1016/S0955-2219(02)00178-4 ↗
37. C. Aksel, B. Rand, F.L. Riley, and P.D. Warren: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 2839-45.10.1016/j.jeurceramsoc.2003.07.017 ↗
38. W. Sinclair and H. Simmons: J. Mater. Sci. Lett., 1987, vol. 6, pp. 627-9.10.1007/BF01770905 ↗
39. C. Aksel: Ceram. Int., 2003, vol. 29, pp. 183-8.10.1016/S0272-8842(02)00103-7 ↗
40. Z.H. Yang, D.C. Jia, Y. Zhou, Q.C. Meng, P.Y. Shi, and C.B. Song: Mater. Chem. Phys., 2008, vol.107, pp. 476-9.10.1016/j.matchemphys.2007.08.013 ↗