journal article·2005-03

Precipitate effects on the mechanical behavior of aluminum copper alloys: Part I. Experiments

H. Sehitoglu, T. Foglesong, H. J. Maier

Publisher page

Abstract

This article focuses on understanding the mechanical behavior of precipitation-hardened alloys by studying single and polycrystalline deformation behavior with various heat treatments. Aluminumcopper alloys are the focus in this work and their changing stress-strain behavior is demonstrated resulting from the different hardening mechanisms brought about by the various precipitates. Extensive transmission electron microscopy investigations facilitated the interpretation of the stress-strain behavior and the work hardening characteristics. The use of both single and polycrystals proved valuable in understanding the role of anisotropy due to crystal orientation vs precipitate-induced anisotropy. The experiments show that precipitation-induced anisotropy could offset the crystal orientation anisotropy depending on the orientation. This is clearly demonstrated with similar [111] and [123] behaviors under 190 °C and 260 °C aging temperatures. Experiments on pure aluminum crystals are also provided for comparison and understanding the crystal anisotropy in the absence of precipitates. Part I of this article will focus on experiments, and part II will describe the modeling of the effect of different metastable phases in the matrix acting as barriers to dislocation motion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. R.W.K. Honeycombe: The Plastic Deformation of Metals, 2nd ed., Butler & Tanner, Ltd., London, 1984.
2. W.M. Lomer: Phil. Mag., 1951, vol. 42, p. 1327.10.1080/14786444108561389 ↗
3. A.H. Cottrell: Phil. Mag., 1952, vol. 43, p. 645.10.1080/14786440608520220 ↗
4. A.N. Stroh: Phil. Mag., 1956, vol. 1, pp. 489–502.10.1080/14786435608238131 ↗
5. A. Kelly: Phil. Mag., 1956, vol. 1 (9), pp. 835–45.10.1080/14786435608238160 ↗
6. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, p. 25.
7. R.W. Cahn: J. Inst. Met., 1951, vol. 79, pp. 129–58.
8. T.S. Noggle and J.S. Koehler: J. Appl. Phys., 1957, vol. 28 (1), pp. 53–62.10.1063/1.1722573 ↗
9. R. Le Hazif and J.-P. Poirer: Acta Metall., 1975, vol. 23, pp. 865–71.10.1016/0001-6160(75)90203-5 ↗
10. P.B. Hirsch, R.W. Horne, and M.J. Whelan: Phil. Mag., 1956, vol. 1, pp. 677–84.10.1080/14786435608244003 ↗
11. A. Mecif, B. Bacroix, and P. Franciosi: Acta Mater., 1997, vol. 45 (1), pp. 371–81.10.1016/S1359-6454(96)00094-8 ↗
12. P. Franciosi, M. Berveiller, and A. Zaoui: Acta Metall., 1980, vol. 28 (3), pp. 273–83.10.1016/0001-6160(80)90162-5 ↗
13. D.A. Hughes and A. Godfrey: Sandia National Laboratories Report No. SAND98-8490C, Sandia National Laboratories, 1998.
14. T. Hasegawa and U.F. Kocks: Acta Metall., 1979, vol. 27, pp. 1705–16.10.1016/0001-6160(79)90085-3 ↗
15. E.O. Hall: Proc. Phys. Soc., 1951, vol. 64, p. 747.10.1088/0370-1301/64/9/303 ↗
16. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, p. 25.
17. J.E. Bailey and P.B. Hirsch: Phil. Mag., 1960, vol. 5, pp. 485–97.10.1080/14786436008238300 ↗
18. Z.S. Basinski: Phil. Mag., 1959, vol. 4, pp. 393–432.10.1080/14786435908233412 ↗
19. J.L. Murray: Int. Met. Rev., 1985, vol. 30 (5), pp. 211–33.
20. G.W. Lorimer: Proc. Precipitation Processes in Solids, Proc. Symp. sponsored by TMS-AIME Heat Treatment at TMS Meeting, TMS-AIME, Niagara Falls, NY, 1976, pp. 87–97.
21. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, United Kingdom, 1980.
22. A. Guinier: Nature, 1938, vol. 142, p. 569.10.1038/142569b0 ↗
23. G.D. Preston: Nature, 1938, vol. 142, p. 570.10.1038/142570a0 ↗
24. C. Chiou, H. Herman, and M.E. Fine: Trans. TMS-AIME, 1960, vol. 218, pp. 299–307.
25. D. Turnbull, H.S. Rosenbaum, and H.N. Treaftis: Acta Metall., 1960, vol. 8, pp. 277–95.10.1016/0001-6160(60)90114-0 ↗
26. R.G. Baker, D.G. Brandon, and J. Nutting: Phil. Mag., 1959, vol. 4 (48), pp. 1339–45.10.1080/14786435908233369 ↗
27. J.M. Silcock, T.J. Heal, and H.K. Hardy: J. Inst. Met., 1953, vol. 82, pp. 239–48.
28. J.G. Byrne, M.E. Fine, and A. Kelly: Phil. Mag., 1961, vol. 6 (69), pp. 1119–45.10.1080/14786436108239674 ↗
29. J.M. Silcock: Acta Metall., 1959, vol. 8, pp. 589–97.10.1016/0001-6160(60)90012-2 ↗
30. H. Wilsdorf and D. Kuhlmann-Wilsdorf: Proc. Defects in Crystalline Solids, The Physical Society, University of Bristol, Bristol, 1954, pp. 175–86.
31. D. Vaughan: Acta Metall., 1968, vol. 16, pp. 563–77.10.1016/0001-6160(68)90131-4 ↗
32. D. Vaughan: Acta Metall., 1970, vol. 18, pp. 183–87.10.1016/0001-6160(70)90082-9 ↗
33. J.D. Boyd and R.B. Nicholson: Acta Metall., 1971, vol. 19, pp. 1379–91.10.1016/0001-6160(71)90076-9 ↗
34. G.C. Weatherly: Phil. Mag., 1968, vol. 17, pp. 791–99.10.1080/14786436808223030 ↗
35. G.C. Weatherly and R.B. Nicholson: Phil. Mag., 1968, vol. 17, pp. 801–31.10.1080/14786436808223031 ↗
36. D. Vaughan: Phil. Mag., 1968, vol. 18, pp. 1305–08.10.1080/14786436808227760 ↗
37. R. Sankaran and C. Laird: Phil. Mag., 1974, vol. 29, pp. 179–215.10.1080/14786437408213562 ↗
38. W.M. Stobbs and G.R. Purdy: Acta Metall., 1978, vol. 26 (7–12), pp. 1069–81.10.1016/0001-6160(78)90135-9 ↗
39. M. Nemoto, N. Morishige, T. Oguchi, and H. Suto: Trans. Jpn. Inst. Met., 1971, vol. 12, pp. 429–33.10.2320/matertrans1960.12.429 ↗
40. L.M. Brown, G.R. Woolhouse, and U. Valdrè: Phil. Mag., 1968, vol. 17, pp. 781–89.10.1080/14786436808223029 ↗
41. L.M. Brown and G.R. Woolhouse: Phil. Mag., 1970, vol. 21 (170), pp. 329–45.10.1080/14786437008238420 ↗
42. G.C. Weatherly: Acta Metall., 1971, vol. 19, pp. 181–92.10.1016/0001-6160(71)90145-3 ↗
43. R. Sankaran and C. Laird: Acta Metall., 1974, vol. 22, pp. 957–69.10.1016/0001-6160(74)90021-2 ↗
44. G.C. Weatherly: Can. Metall. Q., 1969, vol. 8 (2), pp. 105–09.10.1179/cmq.1969.8.2.105 ↗
45. A.W. Zhu and E.A. Starke: Acta Metall. Mater., 1999, vol. 47 (11), pp. 3263–69.10.1016/S1359-6454(99)00179-2 ↗
46. H. Hargarter, M.T. Lyttle, and E.A. Starke: Mater. Sci. Eng., 1998, vol. A257, pp. 87–99.10.1016/S0921-5093(98)00826-0 ↗
47. B. Skrotzki, G.J. Shiflet, and E.A. Starke: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3431–44.10.1007/BF02595436 ↗
48. W.F. Hosford and S.P. Agrawal: Metall. Mater. Trans. A, 1975, vol. 6A, pp. 487–91.10.1007/BF02658406 ↗
49. A.W. Zhu, J. Chen, and E.A. Starke Jr.,: Acta Mater., 2000, vol. 48, pp. 2239–46.10.1016/S1359-6454(00)00026-4 ↗
50. V.B. Nileshwar: J. Inst. Met., 1963–64, vol. 92, pp. 241–45.
51. D. Driver and P. Barrand: Phil. Mag., 1966, vol. 14, pp. 657–65.10.1080/14786436608211963 ↗
52. G. Thomas and M.J. Whelan: Phil. Mag., 1961, vol. 6 (69), pp. 1103–14.10.1080/14786436108239672 ↗
53. C. Laird and H.I. Aaranson: Acta Metall., 1966, vol. 14, pp. 171–85.10.1016/0001-6160(66)90298-7 ↗
54. T.J. Smith: Master’s Thesis, University of Illinois at Urbana-Champaign, Urbana, 1998.
55. T.J. Smith, H.J. Maier, H. Sehitoglu, E. Fleury, and J. Allison: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 133–46.10.1007/s11661-999-0201-y ↗
56. H.K. Hardy: J. Inst. Met., 1951, vol. 79, pp. 321–69.
57. H.K. Hardy: J. Inst. Met., 1953, vol. 82, pp. 236–38.
58. A. Abel and R.K. Ham: Acta Metall., 1966, vol. 14, pp. 1489–94.10.1016/0001-6160(66)90170-2 ↗
59. G.D. Moan and J.D. Embury: Acta Metall., 1979, vol. 27, pp. 903–14.10.1016/0001-6160(79)90125-1 ↗
60. K.C. Russell and M.F. Ashby: Acta Metall., 1970, vol. 18, pp. 891–901.10.1016/0001-6160(70)90017-9 ↗
61. R.J. Price and A. Kelly: Acta Metall., 1964, vol. 12, pp. 159–69.10.1016/0001-6160(64)90184-1 ↗
62. D.V. Wilson: Acta Metall., 1965, vol. 13, pp. 807–14.10.1016/0001-6160(65)90145-8 ↗
63. V. Gerold and H. Haberkorn: Phys. State Solids, 1966, vol. 16, pp. 675–84.10.1002/pssb.19660160234 ↗
64. M.F. Ashby: Phil. Mag., 1970, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗
65. S. Koda K. Matsuura, and S. Takahashi: J. Inst. Met., 1962, vol. 91, pp. 229–34.
66. S.N. Buckley and K.M. Entwistle: Acta Metall., 1956, vol. 4, pp. 352–61.10.1016/0001-6160(56)90023-2 ↗
67. F. Barlat and A.K. Vasudévan: Acta Metall. Mater., 1991, vol. 39 (3), pp. 391–400.10.1016/0956-7151(91)90318-U ↗
68. T.J. Foglesong: Ph.D. Thesis, University of Illinois at Urbana-Champaign, Urbanan IL, 2001.
69. J.S. Kallend, U.F. Kocks, A.D. Rollett, and H.R. Wenk: Mater. Sci. Eng., 1991, vol. A132, (1–2), pp. 1–11.10.1016/0921-5093(91)90355-Q ↗
70. T. Tabata, S. Yamanaka, and H. Fujita: Acta Metall., 1978, vol. 26, pp. 405–11.10.1016/0001-6160(78)90167-0 ↗
71. T. Tabata, H. Fujita, M.-A. Hiraoka, and S. Miyake: Phil. Mag. A: Phys. Condensed Matter Defects Mech. Prop., 1982, 46 (5), pp. 801–16.10.1080/01418618208236932 ↗
72. C. Calabrese and C. Laird: Mater. Sci. Eng., 1974, vol. 13, pp. 159–74.10.1016/0025-5416(74)90183-9 ↗