The interactive role of inclusions and SiC reinforcement on the high-cycle fatigue resistance of particle reinforced metal matrix composites
Source abstract
Abstract
The effect of intermetallic inclusions on the fatigue crack initiation and growth in 2080 Al alloy and 2080/SiC p composites was investigated. Using surface replication, it was determined that, in the highcycle fatigue region, life is dominated by the initiation process. It was also determined that the majority of initiation sites were associated with intermetallic inclusions. While 2080/SiC/20 p showed a definitive relationship between inclusion size and fatigue life, i.e., a higher inclusion size resulted in lower fatigue life, there was no correlation in 2080/SiC/30 p . This was attributed to more of the load being shared by the higher volume fraction of SiC particles and smaller average inclusion sizes in the latter composite. A conceptual model is proposed that accounts for these observations and qualitatively shows the effect of reinforcement on stress enhancement in near-surface inclusions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. W.H. Reimann and A.W. Brisbane: Eng. Fract. Mech., 1973, vol. 5, p. 67.10.1016/0013-7944(73)90008-8 ↗
2. K. Nishioka: Mater. Testing, 1957, vol. 6, pp. 382–85.
3. R.M. Pelloux and R.E. Stoltz: Proc. 4th Int. Conf. on the Strength of Metals and Alloys, 1976, p. 1023.
4. J.H. Mulherin and H. Rosenthal: Metall. Trans., 1971, vol. 2, pp. 427–32.10.1007/BF02663329 ↗
5. N. Chawla, C. Andres, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2843–54.10.1007/s11661-998-0325-5 ↗
6. U. Habel, C.M. Christenson, J.W. Jones, and J.E. Allison: Proc. 10th Int. Conf. Composite Materials, A. Poursartip and K. Street, eds., Woodhead Publishing Ltd., Cambridge, United Kingdom, 1995, vol. 2, pp. 597–604.
7. A.R. Vaidya and J.J. Lewandowski: Mater. Sci. Eng. A, 1996, vol. A220, pp. 85–92.10.1016/S0921-5093(96)10464-0 ↗
8. J. Hall, J.W. Jones, and A. Sachdev: Mater. Sci. Eng. A, 1994, vol. A183, pp. 69–80.10.1016/0921-5093(94)90891-5 ↗
9. J.E. Allison and J.W. Jones: in Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann, Stoneham, MA, 1993, pp. 269–94.10.1016/B978-0-08-052371-2.50019-5 ↗
10. J.J. Bonnen, J.E. Allison, and J.W. Jones: Metall. Trans. A, 1991, vol. 22A, pp. 1007–19.10.1007/BF02661094 ↗
11. C. Li and F. Ellyin: Mater. Sci. Eng. A, 1996, vol. A214, pp. 115–21.
12. E.Y. Chen, L. Lawson, and M. Meshii: Mater. Sci. Eng. A, 1995, vol. A200, p. 192.10.1016/0921-5093(95)07009-5 ↗
13. J.K. Shang and R.O. Ritchie: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, Boston, MA, 1991, p. 255.
14. D.A. Lukasak and D.A. Koss: Composites, 1993, vol. 24, p. 262.10.1016/0010-4361(93)90173-6 ↗
15. D.A. Lukasek: Ph.D. Dissertation, Pennsylvania State University, University Park, PA, 1993.
16. J.L. Cook and W.R. Mohn: Engineered Materials Handbook, ASM INTERNATIONAL, Materials Park, OH, 1987, vol. 1, p. 896.
17. G.J. Hildeman and M.J. Koczak: in Treatise on Materials Science and Technology, A.K. Vasudevan and R.D. Doherty, eds., Academic Press, Boston, MA, 1989, vol. 31, p. 323.
18. H.J. Rack: in Processing and Properties of Powder Metallurgy Composites, P. Kumar, K. Vedula, and A. Ritter, eds., TMS, Warrendale, PA, 1988, p. 155.
19. P.E. Krajewski, J.E. Allison, and J.W. Jones: Metall. Trans. A, 1993, vol. 24A, p. 2731.10.1007/BF02659497 ↗
20. M.H. Swain: in Small Crack Test Methods, ASTM STP 1149, J.M. Larsen and J.E. Allison, eds., ASTM, Philadelphia, PA, 1992, pp. 34–56.10.1520/STP15063S ↗
21. Z. Mei and J.W. Morris, Jr.: Int. J. Fract., 1993, vol. 64, pp. 43–61.10.1007/BF00019624 ↗
22. M. Levin and B. Karlsson: Int. J. Fatigue, 1993, vol. 15, p. 377.10.1016/0142-1123(93)90483-7 ↗
23. L.C. Davis and J.E. Allison: Metall. Trans. A, 1993 vol. 24A pp. 2487–96.10.1007/BF02646527 ↗
24. J.D. Eshelby: Proc. R. Soc, 1957, vol. A241, p. 376.
25. C.D. Liu, M.N. Bassim, and S.S. Lawrence: Eng. Fract. Mech., 1995, vol. 50, pp. 301–07.10.1016/0013-7944(94)00197-P ↗
26. Y. Murakami, S. Kodama, and S. Konuma: Int. J. Fatigue, 1989, vol. 11, pp. 291–98.10.1016/0142-1123(89)90054-6 ↗
27. Y. Murakami, S. Kodama, and S. Konuma: Int. J. Fatigue, 1989, vol. 11, p. 299.10.1016/0142-1123(89)90055-8 ↗
28. J. Grison and L. Remy: Eng. Fract. Mech., 1997, vol. 57, pp. 41–55.10.1016/S0013-7944(97)00006-4 ↗
29. R. Chang, W.L. Morris, and O. Buck: Scripta Metall., 1979, vol. 13, pp. 191–94.10.1016/0036-9748(79)90291-6 ↗
30. W.L. Morris and M.R. James: Metall. Trans., 1980, vol. 11A, pp. 850–51.10.1007/BF02661216 ↗
31. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117–23.10.1007/BF02642422 ↗
32. W.L. Morris, O. Buck, and H.L. Marcus: Metall. Trans. A, 1976, vol. 7A, pp. 1161–65.10.1007/BF02656599 ↗
33. Y.C. Kung and M.E. Fine: Metall. Trans. A, 1979, vol. 10A, pp. 603–10.10.1007/BF02658324 ↗