On the Texture Weakening During Electropulse Annealing Treatment of Mg-1Ce Alloy: The Role of Nucleation and Nucleus Growth
Source abstract
Abstract
Mg-1Ce alloys were pre-rolled at room temperature to various reductions to achieve different as-rolled microstructures. The deformed materials were then treated with a pulsed electric current (electropulse treatment, EPT) to study the effect of the as-rolled microstructure on the recrystallization texture formation. The experimental results show that an optimum window exists for pre-rolling reductions, within which the as-rolled microstructures and sharp basal textures obtained will evolve into fine recrystallized grains and weak textures during the subsequent EPT. Microstructure analysis indicates a competition between two processes, the nucleation and the nucleus growth, in contributing to the texture weakening of the alloy. While both the application of pulsed electric current and the increase in the pre-rolling reductions could strengthen the advantage of the nucleation rate of the non-basal nuclei over those with basal orientations, the contribution from nucleus growth depends mainly on the available deformed basal-oriented matrix, which decreases with increasing pre-rolling reductions. The results of the present study might provide useful guidance for the optimization of process parameters in the future application of the ‘pre-rolling + EPT’ technique on the Mg alloy sheet.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. T.M. Pollock: Science, 2010, vol. 328, pp. 986-987.10.1126/science.1182848 ↗
2. J.F. Nie, Y.M. Zhu, J.Z. Liu and X.Y. Fang: Science, 2013, vol. 340, pp. 957-960.10.1126/science.1229369 ↗
3. A.A. Luo: JOM, 2002, vol. 54, pp. 42-48.10.1007/BF02701073 ↗
4. T.T.T. Trang, J.H. Zhang, J.H. Kim, A. Zargaran, J.H. Hwang, B.C. Suh and N.J. Kim: Nat. Commun., 2018, vol. 9. pp. 1-6.10.1038/s41467-017-02088-w ↗
5. M.-T. Pérez-Prado, J. Bohlen, S. Yi, D. Letzig, T. Al-Samman, J.D. Robson, M.R. Barnett, W.J. Poole, C.L. Mendis and S.R Agnew: JOM, 2020, pp. 1–7.
6. Y. Chino, M. Mabuchi, R. Kishihara, H. Hosokawa, Y. Yamada, C. Wen, K. Shinojima and H. Iwasaki: Mater. Trans., 2002, vol. 43, pp. 2554-2560.10.2320/matertrans.43.2554 ↗
7. H. Watanabe, T. Mukai and K. Ishikawa: J. Mater. Sci., 2004, vol. 39, pp. 1477-1480.10.1023/B:JMSC.0000013922.16079.d3 ↗
8. M. Sanjari, A.S.H. Kabir, A. Farzadfar, H. Utsunomiya, R. Petrov, L. Kestens and S. Yue: J. Mater. Sci., 2013, vol. 49, pp. 1426-1436.10.1007/s10853-013-7827-2 ↗
9. T. Mukai, M. Yamanoi, H. Watanabe and K. Higashi: Scr. Mater., 2001, vol. 45, pp. 89-94.10.1016/S1359-6462(01)00996-4 ↗
10. S.R. Agnew, J.A. Horton, T.M. Lillo and D.W. Brown: Scr. Mater., 2004, vol. 50, pp. 377-381.10.1016/j.scriptamat.2003.10.006 ↗
11. Y.C. Xin, M.Y. Wang, Z. Zeng, G.J. Huang and Q. Liu: Scr. Mater., 2011, vol. 64, pp. 986-989.10.1016/j.scriptamat.2011.02.010 ↗
12. D.K. Guan, W.M. Rainforth, J.H. Gao, J. Sharp, B. Wynne and L. Ma: Acta Mater., 2017, vol. 135, pp. 14-24.10.1016/j.actamat.2017.06.015 ↗
13. D.K. Guan, W.M. Rainforth, L. Ma, B. Wynne and J.H. Gao: Acta Mater., 2017, vol. 126, pp. 132-144.10.1016/j.actamat.2016.12.058 ↗
14. L.W.F. Mackenzie and M.O. Pekguleryuz: Scr. Mater., 2008, vol. 59, pp. 665-668.10.1016/j.scriptamat.2008.05.021 ↗
15. N. Stanford and M.R. Barnett: Mater. Sci. Eng. A, 2008, vol. 496, pp. 399-408.10.1016/j.msea.2008.05.045 ↗
16. I. Basu and T. Al-Samman: Acta Mater., 2014, vol. 67, pp. 116-133.10.1016/j.actamat.2013.12.015 ↗
17. I. Basu, T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A, 2013, vol. 579, pp. 50-56.10.1016/j.msea.2013.04.076 ↗
18. J.A. Del Valle, M.T. Pérez-Prado and O.A. Ruano: Mater. Sci. Eng. A, 2003, vol. 355, pp. 68-78.10.1016/S0921-5093(03)00043-1 ↗
19. R.S. Pei, S. Korte-Kerzel and T. Al-Samman: Materialia, 2020, vol. 12, p. 100715.10.1016/j.mtla.2020.100715 ↗
20. F. Guo, R.S. Pei, L.Y. Jiang, D.F. Zhang, S. Korte-Kerzel and T. Al-Samman: J. Magnesium Alloys, 2020, vol. 8, pp. 252-268.10.1016/j.jma.2019.07.010 ↗
21. L.W.F. Mackenzie, B. Davis, F.J. Humphreys and G.W. Lorimer: Mater. Sci. Technol., 2007, vol. 23, pp. 1173-1180.10.1179/174328407X226509 ↗
22. A. Imandoust, C.D. Barrett, A.L. Oppedal, W.R. Whittington, Y. Paudel and H. El Kadiri: Acta Mater., 2017, vol. 138, pp. 27-41.10.1016/j.actamat.2017.07.038 ↗
23. A. Imandoust, C.D. Barrett, T. Al-Samman, M.A. Tschopp, E. Essadiqi, N. Hort and H. El Kadiri: Metall. Trans. A, 2018, vol. 49, pp. 1809-1829.10.1007/s11661-018-4520-8 ↗
24. J. Bohlen, J. Wendt, M. Nienaber, K.U. Kainer, L. Stutz and D. Letzig: Mater. Charact., 2015, vol. 101, pp. 144-152.10.1016/j.matchar.2015.02.002 ↗
25. Z.R. Zeng, Y.M. Zhu, S.W. Xu, M.Z. Bian, C.H.J. Davies, N. Birbilis and J.F. Nie: Acta Mater., 2016, vol. 105, pp. 479-494.10.1016/j.actamat.2015.12.045 ↗
26. D.K. Guan, X.G. Liu, J.H. Gao, L. Ma, B. Wynne and W.M. Rainforth: J. Alloys Compd., 2019, vol. 774, pp. 556-564.10.1016/j.jallcom.2018.10.065 ↗
27. Y. Estrin, S.S. Nene, B.P. Kashyap, N. Prabhu and T. Al-Samman: Mater. Lett., 2016, vol. 173, pp. 252-256.10.1016/j.matlet.2016.03.052 ↗
28. S. Sandlobes, M. Friak, S. Korte-Kerzel, Z.R. Pei, J. Neugebauer and D. Raabe: Sci. Rep., 2017, vol. 7, pp. 1-8.10.1038/s41598-017-10384-0 ↗
29. H. Conrad, Z. Guo and A.F. Sprecher: Scr. Metall., 1990, vol. 24, pp. 359-362.10.1016/0956-716X(90)90270-Q ↗
30. Z.H. Xu, G.Y. Tang, F. Ding, S.Q. Tian and H.Y. Tian: Appl. Phys. A, 2007, vol. 88, pp. 429-433.10.1007/s00339-007-4007-8 ↗
31. V.E. Gromov, Y.F. Ivanov, O.A. Stolboushkina and S.V. Konovalov: Mater. Sci. Eng. A, 2010, vol. 527, pp. 858-861.10.1016/j.msea.2009.10.045 ↗
32. D.A. Molodov and P.J. Konijnenberg: Scr. Mater., 2006, vol. 54, pp. 977-981.10.1016/j.scriptamat.2005.11.038 ↗
33. D.A. Molodov and N. Bozzolo: Acta Mater., 2010, vol. 58, pp. 3568-3581.10.1016/j.actamat.2010.02.027 ↗
34. 34. D.A. Molodov and A.D. Sheikh-Ali: Acta Mater., 2004, vol. 52, pp. 4377-4383.10.1016/j.actamat.2004.06.004 ↗
35. X.L. Wang, W.B. Dai, C.W. Ma and X. Zhao: J. Mater. Res., 2013, vol. 28, pp. 1378-1385.10.1557/jmr.2013.86 ↗
36. G.L. Hu, G.Y. Tang, Y.H. Zhu and C.H. Shek: Metall. Trans. A, 2011, vol. 42A, pp. 3484-3490.
37. J.N. Liu, W. Liu, G.Y. Tang and R.F. Zhu: J. Mater. Res., 2014, vol. 29, pp. 596-603.10.1557/jmr.2014.3 ↗
38. J. Kuang, X.H. Li, X.X. Ye, J.G. Tang, H.F. Liu, J. Wang and G.Y. Tang: Metall. Trans. A, 2015, vol. 46, pp. 1789-1804.10.1007/s11661-014-2735-x ↗
39. A.L. Etter, M.H. Mathon, T. Baudin, V. Branger and R. Penelle: Scr. Mater., 2002, vol. 46, pp. 311-317.10.1016/S1359-6462(01)01245-3 ↗
40. O. Engler: Scr. Mater., 2001, vol. 44, pp. 229-236.10.1016/S1359-6462(00)00597-2 ↗
41. W.A. Salandro, J.J. Jones, C. Bunget, L. Mears and J.T. Roth, In Electrically Assisted Forming, (Springer, 2015), pp. 39–41.10.1007/978-3-319-08879-2 ↗
42. Pandat software package and PanMagnesium thermodynamic database, 2017. http://www.computherm.com/.
43. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024-1037.10.1107/S0021889808030112 ↗
44. E. Scheil: Zeitschrift für Metallkunde, 1942, vol. 34, pp. 70-72.
45. J.J. Bhattacharyya, S.R. Agnew and G. Muralidharan: Acta Mater., 2015, vol. 86, pp. 80-94.10.1016/j.actamat.2014.12.009 ↗
46. J. Gruber, H.M. Miller, T.D. Hoffmann, G.S. Rohrer and A.D. Rollett: Acta Mater., 2009, vol. 57, pp. 6102-6112.10.1016/j.actamat.2009.08.036 ↗
47. X.L. Liu and J. Wang: Sci. Rep., 2016, vol. 6, p. 21393.10.1038/srep21393 ↗
48. A. Levinson, R.K. Mishra, R.D. Doherty and S.R. Kalidindi: Acta Mater., 2013, vol. 61, pp. 5966-5978.10.1016/j.actamat.2013.06.037 ↗
49. H. Zhang, C.J. Yan, C.Z. Li, Y.C. Xin and Q. Liu: J. Alloys Compd., 2017, vol. 696, pp. 428-434.10.1016/j.jallcom.2016.11.315 ↗
50. M.R. Barnett: Mater. Sci. Eng. A, 2007, vol. 464, pp. 8-16.10.1016/j.msea.2007.02.109 ↗
51. T. Al-Samman, K.D. Molodov, D.A. Molodov, G. Gottstein and S. Suwas: Acta Mater., 2012, vol. 60, pp. 537-545.10.1016/j.actamat.2011.10.013 ↗
52. I. Basu and T. Al-Samman: Acta Mater., 2015, vol. 96, pp. 111-132.10.1016/j.actamat.2015.05.044 ↗
53. X. Li, P. Yang, L.N. Wang, L. Meng and F.E. Cui: Mater. Sci. Eng. A, 2009, vol. 517, pp. 160-169.10.1016/j.msea.2009.03.045 ↗
54. É. Martin, R.K. Mishra and J.J. Jonas: Philos. Mag., 2011, vol. 91, pp. 3613-3626.10.1080/14786435.2011.588613 ↗
55. K.D. Molodov, T. Al-Samman, D.A. Molodov and G. Gottstein: Acta Mater., 2014, vol. 76, pp. 314-330.10.1016/j.actamat.2014.04.066 ↗
56. H. Yan, S.W. Xu, R.S. Chen, S. Kamado, T. Honma and E.H. Han: Scr. Mater., 2011, vol. 64, pp. 141-144.10.1016/j.scriptamat.2010.09.029 ↗
57. M. Sanjari, S.F. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, I.H. Jung and S. Yue: Mater. Sci. Eng. A, 2013, vol. 561, pp. 191-202.10.1016/j.msea.2012.10.075 ↗
58. H. Conrad, N. Karam, S. Mannan and A.F. Sprecher: Scr. Metall., 1988, vol. 22, pp. 235-238.10.1016/S0036-9748(88)80340-5 ↗
59. J.W. Park, H.J. Jeong, S.W. Jin, M.J. Kim, K. Lee, J.J. Kim, S.T. Hong and H.N. Han: Mater. Charact., 2017, vol. 133, pp. 70-76.10.1016/j.matchar.2017.09.021 ↗
60. J.D. Robson, D.T. Henry and B. Davis: Acta Mater., 2009, vol. 57, pp. 2739-2747.10.1016/j.actamat.2009.02.032 ↗
61. T. Al-Samman: Mater. Sci. Eng. A, 2013, vol. 560, pp. 561-566.10.1016/j.msea.2012.09.102 ↗
62. W.A. Salandro, J.J. Jones, C. Bunget, L. Mears and J.T. Roth, In Electrically Assisted Forming, (Springer, 2015), pp. 23–36.10.1007/978-3-319-08879-2_2 ↗
63. É. Martin and J.J. Jonas: Acta Mater., 2010, vol. 58, pp. 4253-4266.10.1016/j.actamat.2010.04.017 ↗
64. Y.Z. Zhou, W. Zhang, B.Q. Wang, G.H. He and J.D. Guo: J. Mater. Res., 2002, vol. 17, pp. 2105-2111.10.1557/JMR.2002.0311 ↗
65. S. Yi, I. Schestakow and S. Zaefferer: Mater. Sci. Eng. A, 2009, vol. 516, pp. 58-64.10.1016/j.msea.2009.03.015 ↗
66. T. Al-Samman and X.H. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3809-3822.10.1016/j.msea.2011.01.080 ↗
67. J.D. Robson: Metall. Trans. A, 2013, vol. 45, pp. 3205-3212.10.1007/s11661-013-1950-1 ↗
68. N. Stanford, D. Atwell and M.R. Barnett: Acta Mater., 2010, vol. 58, pp. 6773-6783.10.1016/j.actamat.2010.09.003 ↗
69. W.X. Wu, L. Jin, F.H. Wang, J. Sun, Z.Y. Zhang, W.J. Ding and J. Dong: Mater. Sci. Eng. A, 2013, vol. 582, pp. 194-202.10.1016/j.msea.2013.05.080 ↗
70. J.P. Hadorn, K. Hantzsche, S. Yi, J. Bohlen, D. Letzig and S.R. Agnew: Metall. Trans. A, 2012, vol. 43, pp. 1363-1375.10.1007/s11661-011-1018-z ↗
71. M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen and S. Kamado: Mater. Sci. Eng. A 2016, vol. 667, pp. 233-39.10.1016/j.msea.2016.04.093 ↗
72. J.P. Hadorn, R.P. Mulay, K. Hantzsche, S. Yi, J. Bohlen, D. Letzig and S.R. Agnew: Metall. Trans. A, 2012, vol. 44, pp. 1566-1576.10.1007/s11661-012-1486-9 ↗