journal article·2020-12Open access

Revisiting Thermal Analysis of Hypereutectic Spheroidal Graphite Cast Irons

M. J. Castro-Román, J. Lacaze, A. Regordosa, J. Sertucha, R. del Campo-Castro

Publisher page

Abstract

This study deals with early solidification of hypereutectic cast irons at varying carbon content and roughly constant alloying additions. Thermal analysis of such alloys shows that the start of the eutectic reaction occurs at a nearly constant temperature for mildly hypereutectic compositions. A similar trend is observed with more hypereutectic compositions but at a higher starting temperature. This jump in the start temperature of the eutectic reaction has not been previously evidenced and is here addressed by considering primary precipitation of graphite. Limiting the analysis to spheroidal graphite cast irons, it is demonstrated that simulation of primary graphite precipitation based on a 2D nucleation/lateral growth model allows substantiating the experimental distinction found between mildly and highly hypereutectic cast irons. This modeling explains that highly hypereutectic alloys start eutectic solidification in a limited temperature range that is nearly insensitive to the initial carbon equivalent of the alloy and to inoculation. This approach also suggests that the start of the eutectic solidification of mildly hypereutectic cast irons is shifted to lower temperature until growth of austenite enriches the liquid in carbon to such an extent that growth of graphite becomes possible.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Additive Manufacturing Materials and Processes · Iron and Steelmaking Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. [1] A. Dioszegi, V.L. Diaconu and V. Fourlakidis: J. Therm. Anal. Calorim., 2016, Vol. 124, pp. 215–25.10.1007/s10973-015-5158-z ↗
2. [2] D.M. Stefanescu: Int. J. Metalcast., 2015, Vol. 9, pp. 7-22.10.1007/BF03355598 ↗
3. [3] H. Fredriksson and D.M. Stefanescu: Cast Iron Science and Technology, ASM International, OH, ASM Handbook, Vol. 1, 2017, pp. 81-86.
4. D.M. Stefanescu, R. Suarez, and Sung Bin Kim: China Foundry, 2020, Vol. 17, pp. 69–84.10.1007/s41230-020-0039-x ↗
5. S. Dawson and P. Popelar: Proceedings of the Keith Millis Symposium, AFS, 2013, pp. 59–66.
6. [6] M.D. Chaudhari, R.W. Heine and C.R. Loper: AFS Cast Metals Res. J., 1975, Vol. 11, pp. 52-60.
7. M. Hillert and V.V. Subba Rao: ISI Publ. 110, The Iron and Steel Institute, London (UK), 1969, pp. 204–12.
8. [8] S. Amini and R. Abbaschian: Carbon, 2013, Vol. 51, pp. 110-23.10.1016/j.carbon.2012.08.019 ↗
9. [9] M.D. Chaudhari, R.W. Heine and C.R. Loper: AFS Trans., 1974, Vol. 82, pp. 379-86.
10. [10] P. Gustafsson: Scand. J. Metall., 1985, Vol. 14, pp. 259-67.
11. [11] R.W. Heine: AFS Trans., 1995, Vol. 103, pp. 199-206.
12. [12] M. Castro, M. Herrera, M.M. Cisneros, G. Lesoult and J. Lacaze: Int. J. Cast Met. Res., 1999, Vol. 11, pp. 369-74.10.1080/13640461.1999.11819301 ↗
13. [13] J. Lacaze and B. Sundman: Metall. Trans., 1991, Vol. 22A, pp. 2211-23.10.1007/BF02664987 ↗
14. [14] J. Lacaze, G. Lesoult and M. Castro: Acta mater., 1998, Vol. 46, pp. 997-1010.10.1016/S1359-6454(97)00282-6 ↗
15. [15] K.M. Pedersen and N.S. Tiedje: Int. J. Cast Met. Res., 2007, Vol. 20, pp. 145-50.10.1179/136404607X239816 ↗
16. M. Bjerre, N.S. Tiedje, J. Thorborg, and J.H. Hattel: IOP Conf. Ser.: Mater. Sci. Eng., 2015, Vol. 84, art. no. 012038.10.1088/1757-899X/84/1/012038 ↗
17. [17] G. Lesoult M. Castro and J. Lacaze: Acta mater., 1998, Vol. 46, pp. 983-95.10.1016/S1359-6454(97)00281-4 ↗
18. [18] J.A. Dantzig and M. Rappaz: Solidification, Engineering Science, EPFL Press, Lausanne, Switzerland, 2009, pp. 268-75.10.1201/9781439808030 ↗
19. J. Lacaze, M. Castro, N. Aichoun, and G. Lesoult: Mem. Etudes Sci. Rev. Metall., 1989, pp. 85–97.
20. [20] M.A. Azeem, M.K. Bjerre, R.C. Atwood, N.S. Tiedje and P.D. Lee: Acta Mater., 2018, Vol. 155, pp. 393-401.10.1016/j.actamat.2018.06.007 ↗
21. [21] J. Lacaze, J. Bourdie and M.J. Castro-Roman: Acta mater., 2017, Vol. 134, pp. 230-35.10.1016/j.actamat.2017.05.032 ↗
22. [22] M. Coster and J.L. Chermant: Précis d’analyse d’images, Presses du CNRS, Paris, France, 1989, pp. 144-48.
23. [23] W.B. Hillig: Acta metall., 1966, Vol. 14, pp. 1868-69.10.1016/0001-6160(66)90046-0 ↗
24. [24] D. Turnbull and J.C. Fisher: J. Chem. Phys., 1949, Vol. 17, pp. 71-73.10.1063/1.1747055 ↗
25. [25] J.W. Cahn, W.B. Hillig and G.W. Sears: Acta metall., 1964, Vol. 12, pp. 1421-39.10.1016/0001-6160(64)90130-0 ↗
26. [26] K.A. Jackson, D.R. Uhlmann and J.D. Hunt: J. Crystal Growth, 1967, Vol. 1, pp. 1-36.10.1016/0022-0248(67)90003-6 ↗
27. [27] W.P. Bosze and R. Trivedi: Metall. Trans., 1974, Vol. 5, pp. 511-12.10.1007/BF02644122 ↗