journal article·2019-11

Effects of Strain Rate and Annealing Temperature on the Evolution of Microstructure and Texture in Pure Niobium

T. W. Xu, S. S. Zhang, N. Cui, L. Cao, Y. Wan

Publisher page

Abstract

The evolution of microstructure and texture was investigated during deformation and recrystallization processes in pure polycrystalline niobium. Optical microstructure, X-ray diffraction, transmission electron microscopy, and electron back-scattered diffraction analyses revealed variant behaviors during deformation and recrystallization; herein, the niobium was compressed under 0.01, 0.1, and 1 s−1 strain rates. As the compressive reduction and strain rate increased, more slips interacted in the deformation process, and the {001} 〈110〉 components became the most important textures in the compressed niobium. For the niobium specimens annealed at 1173 K (900 °C), the (111) [1-10], (111) [0-11], and (010) [1-11] orientations were the main textures. Moreover, the (111) [0-11] and (111) [1-10] orientations became weaker in the annealed niobium as the strain rate increased. The {111} components were the primary textures in the compressed niobium specimen recrystallized at 1323 K (1050 °C). The results showed that the texture intensity decreased and Schmid factors increased in the recrystallized niobium as the strain rate increased. The high Schmid factor also implied that compression under a high strain rate before recrystallization would be optimal for continuous deformation in polycrystalline niobium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. 1. Z.Z. Jiang, S.H. Yu, Y.B. Chun, D.H. Shin, S.K. Hwang, Grain refinement of pure vanadium by equal channel angular pressing. Materials Science and Engineering A 479 (2008) 285–29210.1016/j.msea.2007.06.052 ↗
2. 2. S.I. Wright, G.T. Gray III and A.D. Rollett: Metall. Mater. Trans. A, 1994, vol. 25. pp. 1025-1031.10.1007/BF02652277 ↗
3. 3. J.P. Escobedo, D.P. Field, M.M. Leblanc, J.N. Florando and D.H. Lassila: Scr. Mater., 2014, vol. 80. pp. 21-24.10.1016/j.scriptamat.2014.02.006 ↗
4. K. Rajeev and N.N. Sia: Metall. Mater. Trans. A, 2000, vol. 31. pp. 815-823.
5. 5. W.D. Luo, D. Roundy, M.L. Cohen and J.W. Morris: Phys. Rev. B, 2002, vol. 66. pp. 094-110.
6. 6. M. Knezevic, M. Zecevic, I.J. Beyerlein, A. Bhattacharyya and R.J. Mccabe: JOM, 2015, vol. 67. pp. 2670-2674.10.1007/s11837-015-1613-3 ↗
7. 7. J.W. Christian and B.C. Masters: Proceedings of the Royal Society A, 1964, vol. 281. pp. 240-257.10.1098/rspa.1964.0180 ↗
8. 8. C.A. Michaluk: J. Electron. Mater., 2002, vol. 31. pp. 2-9.10.1007/s11664-002-0165-9 ↗
9. P. J. Noell and E.M. Taleff: Mater. Trans. A, vol. 47A, pp. 2016–5023.10.1007/s11661-016-3644-y ↗
10. 10. L. Chen, W.P. Xie, M.Y. Li, J.L. He, H.R. Fan, B.C. Zhang, F.S. He, K. Zhao, J.E. Chen and K.X. Liu: Chin. Phys. C, 2008, vol. 32. pp. 1003-1006.10.1088/1674-1137/32/12/012 ↗
11. 11. A. Zamiri, F. Pourboghrat, H. Jiang, T.R. Bieler, F. Barlat, J. Brem, C. Compton and T.L. Grimm: Materials Science and Engineering A, 2006, Vol. 435–436. pp. 658–66510.1016/j.msea.2006.07.111 ↗
12. 12. K. Lembit, K. Eduard, S. Mart and V. Mart: J. Mater. Sci., 2013, vol. 48. pp. 4723-4729.10.1007/s10853-013-7210-3 ↗
13. 13 C. Deng, S.F. Liu, J.L. Ji, X.B. Hao, Z.Q. Zhang and Q. Liu: J. Mater. Process Technol., 2014, vol. 214. pp. 462- 469.10.1016/j.jmatprotec.2013.09.026 ↗
14. 14. H. Jiang, T.R. Bieler, C. Compton and T.L. Grimm: Physica C, 2006, vol. 441. pp. 118-121.10.1016/j.physc.2006.03.025 ↗
15. 15. A. Bhattacharyya, D. Rittel and G. Ravichandran: Int. J. Mat. Res., 2007, vol. 98 (9). pp. 889-893.10.3139/146.101534 ↗
16. 16. J.Y. Kim, D.C. Jang and J.R. Greer: Scr. Mater., 2009, vol. 61. pp. 300-303.10.1016/j.scriptamat.2009.04.012 ↗
17. 17. R. Srinivasan, G.B. Viswanathan, V.I. Levit and H.L. Fraser: Mater. Sci. Eng. A, 2009, vol. 507. pp. 179-189.10.1016/j.msea.2008.12.013 ↗
18. 18. H.R.Z. Sandim, J.F.C. Lins, A.L. Pinto and A.F. Padilha: Mater. Sci. Eng. A, 2003, vol. 354. pp. 217-228.10.1016/S0921-5093(03)00011-X ↗
19. 19. J.D. Carroll, B.G. Clark, T.E. Buchheit, B.L. Boyce and C.R. Weinberger: Mater. Sci. Eng. A, 2013, vol. 581. pp. 108-118.10.1016/j.msea.2013.05.085 ↗
20. 20. M.F. Hupalo and H.R.Z. Sandim: Mater. Sci. Eng. A, 2001, vol. 318. pp. 216-223.10.1016/S0921-5093(01)01323-5 ↗
21. 21. D. Colas, E. Finot, S. Flouriot, S. Forest, M. Mazière and T. Paris: Materials Science & Engineering A, 2014, Vol. 615. pp. 283–29510.1016/j.msea.2014.07.028 ↗
22. 22. C. Feng and P. Kumar: JOM, 1989, vol. 41. pp. 40-45.10.1007/BF03220361 ↗
23. 23. T.W. Xu, J.S. Li, S.S. Zhang, F.S. Zhang and X.H. Liu: J. Alloys Compd., 2016, vol. 682. pp. 404-411.10.1016/j.jallcom.2016.04.293 ↗
24. 24. B. Sander and D. Raabe: Mater. Sci. Eng. A, 2008, vol. 479. pp. 236-247.10.1016/j.msea.2007.06.077 ↗
25. 25. S. Matthies and G.W. Vinel: Phys. Status Solidi B, 1982, vol. 112. pp. 111-114.10.1002/pssb.2221120254 ↗
26. 26. H.C. Kou, Y. Chen, B. Tang, Y.W. Cui, F. Sun, J.S. Li and X.Y. Xue: J. Alloys Compd., 2014, vol. 603. pp. 23-27.10.1016/j.jallcom.2014.03.070 ↗
27. 27. J.J. Jonas and L.S. Toth: Scripta Metellurgica Et Materialia, 1992, vol. 27. pp. 1575-158010.1016/0956-716X(92)90147-7 ↗
28. 28. P. Yang, Z. Li, W. Mao and Z. Zhao: Transactions of materials and heat treatment, 2009, vol. 30(3). pp. 46-52.
29. 29. T.W. Xu, S.S. Zhang, F.S. Zhang, H.C. Kou and J.S. Li: Mater. Sci. Eng. A, 2016, vol. 654. pp. 249-255.10.1016/j.msea.2015.12.052 ↗