journal article·2019-08-15

Preparation and Characterization of Slurry Aluminide Coating on TP347H FG Stainless Steel

Jinyang Huang, Jintao Lu, Xingxing Zhang, Zheng Yang, Yongli Zhou, Zhen Yang, Yingying Dang, Yong Yuan

Publisher page

Abstract

Aluminide coating was prepared on the surface of austenitic TP347H FG stainless steel through a slurry deposition process. SEM (Scanning Electron Microscope), EDS (Energy Dispersive Spectrometer), and XRD (X-Ray Diffraction) analyses were employed to understand the influence of deposition parameters on the microstructures and phase compositions of slurry aluminide coatings. The study found that a two-layered aluminide coating with an interdiffusion layer and an outer layer formed on all conditions. The outer layer mainly consisted of (Fe, Ni)Al phase or (Fe, Ni)Al + Fe3Al + CrSi phases, while those of in the interdiffusion layer are (Fe, Ni)Al + α-Fe + CrxSiy phases. The variation curve of the coating thickness followed a parabolic law as the holding time changed and an index law as the deposition temperature changed, respectively. The shot-peening effect on the formation of aluminide coating was indistinctive for slurry aluminizing at 930 °C. Besides, a controlling method of the thickness of aluminide coatings was proposed by simplifying the diffusion process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. C.Y. Chi, H.Y. Yu, and X.S. Xie: World Iron & Steel, 2012, vol. 4, pp. 50-65.
2. F. Abe: Engineering, 2015, vol. 1, pp. 211-224.10.15302/J-ENG-2015031 ↗
3. H. Abe, S.M. Hong, and Y. Watanabe: Nuclear Engineering and Design, 2014, vol. 280, pp. 652-660.10.1016/j.nucengdes.2014.08.020 ↗
4. J.L. Marulanda, S.I. Castañeda, and F.J. Pérez: Oxidation of Metals, 2015, vol. 84, pp. 429-445.10.1007/s11085-015-9563-2 ↗
5. T. Dudziak, M. Łukaszewicz, N. Simms, and J.R. Nicholls: British Corrosion Journal, 2014, vol. 50, pp. 272-282.
6. D.J. Park,, H.G. Kim, J.Y. Park, Y.I Jung, J.H. Park, and Y.H. Koo: Corrosion Science, 2015, vol. 94, pp. 459-465.10.1016/j.corsci.2015.02.027 ↗
7. F. Sun, Y.F. Gu, J.B. Yan, Z.H. Zhong, and M. Yuyama: Acta Materialia, 2016, vol. 102, pp. 70-78.10.1016/j.actamat.2015.09.006 ↗
8. S.J. Patel, B.A. Baker, and R.D. Gollihue: Procedia Engineering, 2015, vol. 55, pp. 246-252.10.1016/j.proeng.2013.03.250 ↗
9. C. Wang, Y. Guo, J. Guo, and L. Zhou: Materials Science and Engineering: A, 2016, vol. 670, pp. 178-187.10.1016/j.msea.2016.06.018 ↗
10. A. Agüero, I. Baraibar, V. González, R. Muelas, and D. Plana: Oxidation of Metals, 2016, vol. 85, pp. 263-281.10.1007/s11085-015-9575-y ↗
11. G. Boissonnet, C. Boulesteix, G. Bonnet, J. Balmain, and F. Pedraza: Oxidation of Metals, 2017, vol. 88, pp. 191-202.10.1007/s11085-016-9682-4 ↗
12. E.A. Levashov, A.S. Mukasyan, A.S. Rogachev, and D.V. Shtansky: International Materials Reviews, 2017, vol. 62, pp. 203-239.10.1080/09506608.2016.1243291 ↗
13. E. Frutos, P. Adeva, J.L. González-Carrasco, and P. Pérez: Surface & Coatings Technology, 2013, vol. 236, pp. 188-199.10.1016/j.surfcoat.2013.09.046 ↗
14. R.S. Dutta, K. Singh, B. Vishwanadh, and G.K. Dey: Materials and Manufacturing Processes, 2017, vol. 32, pp. 1845-1850.10.1080/10426914.2017.1317794 ↗
15. F. Pedraza, M. Proy, C. Boulesteix, P. Krukovskyi, and M. Metel: Materials & Corrosion, 2016, vol. 67, pp. 1059-1067.10.1002/maco.201508758 ↗
16. F. Pedraza, C. Boulesteix, M. Proy, I. Lasanta, T.D. Miguel, A. Illana, and F.J. Pérez: Oxidation of Metals, 2017, vol. 87, pp. 443-454.10.1007/s11085-017-9725-5 ↗
17. C. Boulesteix, V. Kolarik, and F. Pedraza: Corrosion Science, 2018, vol. 144, pp. 328-338.10.1016/j.corsci.2018.08.053 ↗
18. R.N. Durham, L. Singheiser, and W.J. Quadakkers: Mater. Corros., 2015, vol. 59, pp. 402–08.10.1002/maco.200804122 ↗
19. F.J. Pérez, M.P. Hierro, M.C. Carpintero, and F.J. Bolivar: Surface & Coatings Technology, 2004, vol. 184, pp. 361-369.10.1016/j.surfcoat.2003.11.001 ↗
20. F. Li, X. Chen, W. Lin, H. Pan, X. Jin, and X. Hua: Surface & Coatings Technology, 2017, vol. 319, pp. 129-135.10.1016/j.surfcoat.2017.03.038 ↗
21. W. Lin, F. Li, D. Wu, X. Chen, X. Hua, and H. Pan: Journal of Materials Engineering and Performance, 2018, vol. 27, pp. 1825-1836.10.1007/s11665-018-3259-0 ↗
22. C. Boulesteix, F. Pedraza, M. Proy, I. Lasanta, T.D. Miguel, A. Illana, and F.J. Pérez: Oxidation of Metals, 2017, vol. 87, pp. 469-479.10.1007/s11085-017-9726-4 ↗
23. Z.D. Xiang, D. Zeng, C.Y. Zhu, S.R. Rose, and P.K. Datta: Corrosion Science, 2011, vol. 53, pp. 496-502.10.1016/j.corsci.2010.09.064 ↗
24. C. Boulesteix, and F. Pedraza: Surface & Coatings Technology, 2018, vol. 339, pp. 27-36.10.1016/j.surfcoat.2018.01.086 ↗
25. M.C. Galetz, X. Montero, M. Mollard, M. Günthner, F. Pedraza, and M. Schütze: Intermetallics, 2014, vol. 44, pp.8-17.10.1016/j.intermet.2013.08.002 ↗
26. R. Swadźba, L. Swadźba, B. Mendala, B. Witala, J. Tracz, and K. Marugi: Intermetallics, 2017, vol. 87, pp. 81-89.10.1016/j.intermet.2017.04.015 ↗
27. R. Verma, N.M. Suri, and S. Kant: Materials and Manufacturing Processes, 2017, vol. 32, pp. 416-424.10.1080/10426914.2016.1221090 ↗
28. J. Bermejo Sanz, R.R. García, V. Kolarik, and M.M. Juez-Lorenzo: Oxid. Met., 2017, vol. 88, pp. 179–90.10.1007/s11085-017-9771-z ↗
29. R. Wang, Z. Zheng, Q. Zhou, and Y. Gao: Corrosion Science, 2016, vol. 111, pp. 728-741.10.1016/j.corsci.2016.06.012 ↗
30. Z.D. Xiang, and P.K. Datta: Scripta Materialia, 2006, vol. 55, pp. 1151-1154.10.1016/j.scriptamat.2006.08.016 ↗
31. S.P. Garg, G.B. Kale, R.V. Patil and T. Kundu: Intermetallics, 1999, vol. 7, pp. 901-908.10.1016/S0966-9795(98)00139-3 ↗
32. D. A. Porter, K. E. Easterling, M Sherif: Phase Transformations in Metals and Alloys, 3rd ed., CRC Press, Boca Raton, 2009, pp 536.