journal article·2019-08-15Open access

Acoustic Emission During Austenite → ε Martensitic Phase Transformation in TWIP/TRIP Steels

M. K. Bolgár, E. Nagy, L. Daróczi, M. Benke, V. Mertinger, D. L. Beke

Abstract

Abstract Acoustic emission in two different TWIP/TRIP steels during thermally induced γ–ε martensitic phase transformation was investigated. Large asymmetry was observed: the noise activity was considerably larger for heating than cooling. This was explained by the plastic deformation and strain-induced martensite nucleation (which usually provides much lower acoustic emission signals) in the austenite during cooling. The amplitude and energy probability distribution functions for heating followed the power-law behavior, and the critical exponents were counted as well. The amplitude and energy exponents (α and ε, respectively) for the two different samples were the same within the errors (α = 2.4 ± 0.2, ε = 1.7 ± 0.1), indicating the universal character. The acoustic activity vs martensite volume faction showed a maximum at around 60 pct for heating, which is most probably related to the coming apart of the elastic fields of the martensite variants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. H. K. D. H. Bhadeshia and R. W. K. Honeycombe: Steels Microstructure and Properties, 3rd edn. Butterworth-Heinemann, Oxford, 2006, p. 229.
2. B. C. De Cooman, Y. Estrin, and S. K. Kim, Acta Materialia, 2018, vol. 142, pp. 283-362.10.1016/j.actamat.2017.06.046 ↗
3. L. Chen, Y. Zhao and X. Qin, Acta Metallurgica Sinica, 2013, vol. 26, pp. 1-15.10.1007/s40195-012-0501-x ↗
4. P. Zhou and M. X. Huang, Metall. Mater. Trans. A, 2015, vol. 46, pp. 5080-5090.10.1007/s11661-015-3100-4 ↗
5. T. T. Huang, W. J. Dan and W. G. Zhang, Metall. Mater. Trans. A, 2017, vol. 48, pp. 4553-4564.10.1007/s11661-017-4245-0 ↗
6. P. Lan and J. Zhang, Metall. Mater. Trans. A, 2018, vol. 49, pp. 147-161.10.1007/s11661-017-4421-2 ↗
7. F.D. Fischer, Q.-P. Sun and K. Tanaka, Appl. Mech. Rev., 1996, vol. 49, pp. 317-364.10.1115/1.3101930 ↗
8. M. Linderov, C. Segel, A. Wiedner, H. Biermann and A. Vinogradov, Materials Science and Engineering: A, 2014, vol. 597, pp. 183-193.10.1016/j.msea.2013.12.094 ↗
9. S. M. C. van Bohemen, J. Sietsma, M. J. M. Hermans, and I. M. Richardson, Acta Materialia, 2003, vol. 51, pp. 4183-4196.10.1016/S1359-6454(03)00236-2 ↗
10. S. M. C. van Bohemen, M. J. M. Hermans, and G. den Ouden, Materials Science and Technology, 2002, vol. 18, pp. 1524-1528.10.1179/026708302225007709 ↗
11. S. M. C. van Bohemen, M. J. M. Hermans, G. den Ouden, and I. M. Richardson, Journal of Physics D: Applied Physics, 2002, vol. 35, pp. 1889-1894.10.1088/0022-3727/35/15/313 ↗
12. M. Shaira, N. Godin, P. Guy, L. Vanel, and J. Courbon, Materials Science and Engineering: A, 2008, vol. 492, pp. 392-399.10.1016/j.msea.2008.04.068 ↗
13. A. Vinogradov, A. V. Danyuk, D. L. Merson, and I. S. Yasnikov, Scripta Materialia, 2018, vol. 151, pp. 53-56.10.1016/j.scriptamat.2018.03.036 ↗
14. L. Z. Tóth, L. Daróczi, S. Szabó, and D. L. Beke, Physical Review B, 2016, vol. 93, pp. 144108-144117.10.1103/PhysRevB.93.144108 ↗
15. D. L. Beke, M. K. Bolgár, L. Z. Tóth, and L. Daróczi, Journal of Alloys and Compounds, 2018, vol. 741, pp. 106-115.10.1016/j.jallcom.2017.11.271 ↗
16. M.L. Rosinberg and E. Vives, Disorder and Strain-Induced Complexity in Functional Materials, Springer, Berlin Heidelberg, 2012, pp. 249-272.10.1007/978-3-642-20943-7_13 ↗
17. A. Dobrinevski, P. L. Doussal, and K. J. Wiese, EPL (Europhysics Letters), 2014, vol. 108, pp. 66002-66008.10.1209/0295-5075/108/66002 ↗
18. A. Planes, L. Mañosa, and E. Vives, Journal of Alloys and Compounds, 2013, vol. 577, pp. S699-S704.10.1016/j.jallcom.2011.10.082 ↗
19. M.K. Bolgár, L. Daróczi, L.Z. Tóth, E.E. Timofeeva, E.Y. Panchenko, Y.I. Chumlyakov, and D.L. Beke, Journal of Alloys and Compounds, 2017, vol. 705, pp. 840-848.10.1016/j.jallcom.2017.02.167 ↗
20. L. Krüger, S. Wolf, U. Martin, S. Martin, P.R. Scheller, A. Jahn and A. Weiss, J. Phys. Conf. Ser., 2010, vol. 240, pp. 012098-012102.10.1088/1742-6596/240/1/012098 ↗
21. A. Jahn, A. Kovalev, A. Weiss, S. Wolf, L. Krüger and P.R. Scheller, Steels Research International, 2011, vol. 82, pp. 39-44.10.1002/srin.201000228 ↗
22. J. Talonen and H. Hänninen, Acta Materialia, 2007, vol. 55, pp. 6108 -6118.10.1016/j.actamat.2007.07.015 ↗
23. M. Benke, V. Mertinger, and F. Tranta, Materials Science Forum, 2013, vol. 738-739, pp. 257-261.10.4028/www.scientific.net/MSF.738-739.257 ↗
24. V. Mertinger, M. Benke, E. Nagy, and T. Pataki, Journal of Materials Engineering and Performance, 2014, vol. 23, pp. 2347-2350.10.1007/s11665-014-1025-5 ↗
25. D. L. Beke, L. Daróczi, and T. Y. Elrasasi, Shape Memory Alloys-Processing, Characterization and Applications, InTech, London, 2013, pp. 167-196.
26. D.L. Beke, L. Daróczi, L.Z. Tóth, M.K. Bolgár, N.M. Samy, and A. Hudák, Metals, 2019, vol. 9, pp. 58-81.10.3390/met9010058 ↗
27. V. Mertinger, M. Benke, and E. Nagy, Materials Today: Proceedings, 2015, vol. 2, pp. S673-S676.10.1016/j.matpr.2015.07.373 ↗