Superior Strength with Enhanced Fracture Resistance of Al-Mg-Sc Alloy Through Two-Step Cryo Cross Rolling
Source abstract
Abstract
The evolution of microstructure and the preferred orientation during the two-step cross rolling at room (RT) and cryogenic temperatures (CTs) on Al-Mg-Sc alloy were investigated and compared with the unidirectional rolled Al-Mg-Sc alloy in this study. In addition, the effects of two-step cross rolling on tensile, forming and void coalescence behavior were analyzed. After the solution heat treatment, the two-step cross rolling was executed with an initial 25 pct reduction in the unidirectional path and the final 25 pct reduction in the transverse direction. The two-step cross-rolled (TSCR) Al-Mg-Sc alloy at CT showed a higher fraction of sub-micron grains. The TSCR Al-Mg-Sc alloy exhibited brass and copper and a strong S texture. The texture indices and in-plane anisotropy values indicated the highly anisotropic nature of the TSCR Al-Mg-Sc alloy. During tensile deformation, the TSCR Al-Mg-Sc alloy at CT exhibited a strength value of 423 MPa, whereas the TSCR Al-Mg-Sc alloy at RT revealed only 378 MPa. The TSCR Al-Mg-Sc alloy at CT exhibited inferior formability compared with the TSCR Al-Mg-Sc alloy at RT and the solution heat-treated base alloy. The formability of the TSCR Al-Mg-Sc alloy was evaluated through the combined forming and fracture limit diagram (CFFLD). The presence of higher Goss-oriented grains enhanced the fracture resistance of the TSCR Al-Mg-Sc alloy at CT. Furthermore, consistency was found between the evaluated void coalescence parameters and the CFFLD.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. [1] I.J.Polmear: Light Alloys, 4th ed., Butterworth-Heinemann, Oxford, 2006, pp. 205-35
2. The Strong Light Weight Aerospace Aluminium AA5028 AlMgSc, Aleris Corporation, USA, 2015, https://www.aleris.com/wp-content/uploads/2016/02/AL-2342_012-Aktualisierung-BR-AlMgSc-2015-06-03-WEB.pdf, accessed 20 Nov 2018.
3. [3] K.L. Kendig and D.B. Miracle: Acta Mater., 2002, vol. 50, pp. 4165–75.10.1016/S1359-6454(02)00258-6 ↗
4. [4] T. Dorin, M. Ramajayam, A. Vahid, T. Langan: Aluminium Scandium Alloys, in: Roger N. Lumley (Ed.), Fundamentals of Aluminium Metallurgy Recent Advances, Woodhead Publishing Series in Metals and Surface Engineering, UK, 2018, pp. 439-494.10.1016/B978-0-08-102063-0.00012-6 ↗
5. [5] Y.A. Filatov, V.I. Yelagin and V. V Zakharov: Mater. Sci. Eng. A, 2000, vol. 280, pp. 97–101.10.1016/S0921-5093(99)00673-5 ↗
6. [6] Z. Yin, Q. Pan, Y. Zhang and F. Jiang: Mater. Sci. Eng. A, 2000, vol. 280, pp. 151–55.10.1016/S0921-5093(99)00682-6 ↗
7. [7] W. Yang, D. Yan and L. Rong: Scr. Mater., 2013, vol. 68, pp. 587–90.10.1016/j.scriptamat.2012.12.009 ↗
8. [8] R. Roumina and C.W. Sinclair: Acta Mater., 2010, vol. 58, pp. 111–21.10.1016/j.actamat.2009.08.062 ↗
9. [9] Y.W. Riddle and T.H. Sanders: Metall. Mater. Trans. A, 2004, vol. 35, pp. 341-50.10.1007/s11661-004-0135-3 ↗
10. [10] V. Ocenasek and M. Slamova: Mater. Charct., 2001, vol. 47, pp. 157–62.10.1016/S1044-5803(01)00165-6 ↗
11. O.Roder, T. Wirtz, A. Gysler and G. Liitjering: Mater. Sci. Eng. A, 1997, vol. 234-236, pp. 181–84.10.1016/S0921-5093(97)00224-4 ↗
12. [12] A. Vinogradov, A. Washikita, K. Kitagawa and V.I. Kopylov: Mater. Sci. Eng. A, 2003, vol. 349, pp. 318–26.10.1016/S0921-5093(02)00813-4 ↗
13. [13] M. Li, Q. Pan, Y. Wang and Y. Shi: Mater. Sci. Eng. A, 2014, vol. 598, pp. 350–354.10.1016/j.msea.2014.01.045 ↗
14. [14] D. Zhemchuzhnikova, A. Mogucheva and R. Kaibyshev: Mater. Sci. Eng. A, 2013, vol. 565, pp. 132–41.10.1016/j.msea.2012.12.017 ↗
15. [15] D. Zhemchuzhnikova, S. Malopheyev, S. Mironov and R. Kaibyshev: Mater. Sci. Eng. A, 2014, vol. 598, pp. 387–95.10.1016/j.msea.2014.01.060 ↗
16. [16] S.K. Panigrahi, D. Devanand and R. Jayaganthan: Trans. Indian Inst. Met., 2008, vol. 61, pp. 159–63.10.1007/s12666-008-0028-z ↗
17. [17] B. Wang, X. Chen, F. Pan, J. Mao and Y. Fang: Trans. Nonferrous Met. Soc. China., 2015, vol. 25, pp. 2481–89.10.1016/S1003-6326(15)63866-3 ↗
18. [18] D. Singh, P.N. Rao and R. Jayaganthan: Mater. Sci. Technol., 2014, vol. 30, pp. 1835–42.10.1179/1743284713Y.0000000496 ↗
19. [19] R.J. Immanuel and S.K. Panigrahi: Mater. Sci. Eng. A, 2015, vol. 640, pp. 424-35.10.1016/j.msea.2015.06.019 ↗
20. [20] P. Das, R. Jayaganthan, T. Chowdhury and I. V Singh: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7124-32.10.1016/j.msea.2011.05.021 ↗
21. P.L.M. Kanta, V.C. Srivastava, K. Venkateswarlu, S. Paswan, B. Mahato,G.Das, K.Sivaprasad and K.Gopala Krishna: Int. J. Miner. Metall. Mater., 2017, vol. 24, pp. 1293-05.10.1007/s12613-017-1522-2 ↗
22. K.S.V.B.R. Krishna, S. Vigneshwaran, K.Chandra Sekhar, S.S.R. Akella, K. Sivaprasad, R. Narayanasamy and K. Venkateswarlu: Int. J. Adv. Manuf. Technol., 2017, vol. 93, pp. 253–59.10.1007/s00170-016-8863-2 ↗
23. [23] R. Jayaganthan, H.G. Brokmeier, B. Schwebke and S.K. Panigrahi: J. Alloys Compd., 2010, vol. 496, pp. 183–88.10.1016/j.jallcom.2010.02.111 ↗
24. [24] Y. Wang, M. Chen, F. Zhou and E. Ma: Nature, 2002, vol. 419,pp. 912–15.10.1038/nature01133 ↗
25. J. Zheng, C. Li, S. He, B. Ma andY. Song: Mater. Sci. Technol., 2017, vol. 33, 1681-87.10.1080/02670836.2017.1313362 ↗
26. G.S. D’yakonov, S. V Zherebtsov, M. V Klimova and G.A. Salishchev: Phys. Met. Metallogr., 2015, vol. 116, pp. 182–88.10.1134/S0031918X14090038 ↗
27. [27] Y.D. Shi, D.F. Guo, M. Li, Z.B. Zhang, T.Y. Ma and X.Y. Zhang: Mater. Sci. Technol., 2013, vol. 29, pp. 921–924.10.1179/1743284713Y.0000000214 ↗
28. [28] S. Vigneshwaran, K. Sivaprasad, R. Narayanasamy and K. Venkateswarlu: Mater. Sci. Eng. A, 2019, vol. 740–741, pp. 49–62.10.1016/j.msea.2018.10.044 ↗
29. [29] S. Vigneshwaran, K. Sivaprasad, R. Narayanasamy and K. Venkateswarlu: Mater. Sci. Eng. A, 2018, vol. 72, pp. 14–21.10.1016/j.msea.2018.02.072 ↗
30. [30] T. Konkova, S. Mironov, A. Korznikov, G. Korznikova, M.M. Myshlyaev and S.L. Semiatin: Mater. Des., 2015, vol. 86, pp. 913–21.10.1016/j.matdes.2015.06.146 ↗
31. C. Xing Pin, S. Du, X. Rui, H.Guang Jie and L. Qing: Trans. Nonferrous Met. Soc. China., 2010, vol. 20, pp. 589–93.10.1016/S1003-6326(10)60544-4 ↗
32. [32] S. Suwas, A.K. Singh, K.N. Rao and T. Singh: Z. Metallkd., 2002, vol. 93, pp. 928-37.10.3139/146.020928 ↗
33. [33] W. Liu, X. Kong, M. Chen, J. Li, H. Yuan and Q. Yang: Mater. Sci. Eng, 2009, vol. 516, pp. 263–69.10.1016/j.msea.2009.03.022 ↗
34. [34] W. Liu, X. Li and X. Meng: Scr. Mater., 2009, vol. 60, pp. 768–71.10.1016/j.scriptamat.2009.01.015 ↗
35. [35] N. Nayan, S. Mishra, A. Prakash, S.V.S.N. Murty, M.J.N. V Prasad and I. Samajdar: Mater. Sci. Eng. A, 2019, vol. 740–741, pp. 252–61.10.1016/j.msea.2018.10.089 ↗
36. [36] W.Y. Yeung and B.J. Duggan: Acta Mater., 1986, vol. 34, pp. 653–60.10.1016/0001-6160(86)90180-X ↗
37. [37] N.P. Gurao, S. Sethuraman and S. Suwas: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7739–50.10.1016/j.msea.2011.06.062 ↗
38. [38] S. Suwas, N.P. Gurao: Development of Microstructures and Textures by Cross Rolling, in: M.S.J. Hashmi (Ed.), Comprehensive materials processing, Elsevier, Oxford, 2014, pp. 81-106.10.1016/B978-0-08-096532-1.00308-3 ↗
39. [39] T. Ungár: Scr. Mater., 2004, vol. 51, pp. 777–781.10.1016/j.scriptamat.2004.05.007 ↗
40. [40] A.K. Zak, W.H.A. Majid, M.E. Abrishami and R. Youse: Solid State Sci., 2011, vol. 13, pp. 251-56.10.1016/j.solidstatesciences.2010.11.024 ↗
41. [41] R.R. Smallman and K.H. Westmacott: Philos Mag., 1957, vol. 2, pp. 669–83.10.1080/14786435708242709 ↗
42. K.S.V.B.R. Krishna, K. Chandra Sekhar, R. Tejas, N. Naga Krishna, K. Sivaprasad, R. Narayanasamy and K. Venkateswarlu: Mater. Des., 2015, vol. 67, pp. 107–17.10.1016/j.matdes.2014.11.022 ↗
43. [43] R.E. Smallman and D. Green: Acta. Mater., 1964, vol. 12, pp. 145-54.10.1016/0001-6160(64)90182-8 ↗
44. [44] H. Bunge: Texture Analysis in Materials Science – Mathematical Methods, Butterworth & Co., UK, 1982. pp. 88-89.
45. [45] M.Y. Huh, S.Y. Cho and O. Engler: Mater. Sci. Eng. A, 2001, vol. 315, pp. 35–46.10.1016/S0921-5093(01)01207-2 ↗
46. [46] T. Ozturk: Scr. Mater., 1988, vol. 22, pp. 1611-16.10.1016/S0036-9748(88)80252-7 ↗
47. [47] A. Bocker, H. Klein and H.J. Bunge: Textures and Microstruct., 1990, vol. 12, pp. 155–74.10.1155/TSM.12.155 ↗
48. [48] P.P. Bhattacharjee, M. Joshi, V.P. Chaudhary and M. Zaid: Mater. Charact., 2012, vol. 76, 21–27.10.1016/j.matchar.2012.11.005 ↗
49. K. Chandra Sekhar, R. Narayanasamy and K. Velmanirajan: Mater. Des., 2014, vol. 53, pp. 1064–70.10.1016/j.matdes.2013.08.008 ↗
50. [50] G.E. Dieter, Mechanical Metallurgy, McGraw-Hill Book Company limited, UK, 1988, pp. 35-37.
51. [51] I.Samajdar and R.D. Doherty: Scr. Mater., 1995, vol. 32, pp. 845–50.10.1016/0956-716X(95)93212-M ↗
52. [52] K. Velmanirajan, K. Anuradha, A.S. Abu, R. Narayanasamy, R. Madhavan and S. Suwas: Arch. Civ. Mech. Eng., 2013, vol. 14, pp. 398–16.10.1016/j.acme.2013.10.009 ↗
53. [53] Y. Zhang and Z. Chen: Int. J. Fract., 2007, vol. 143, pp. 105–12.10.1007/s10704-006-9045-2 ↗
54. [54] S.C. Tang and L.B. Chappius: J. Mater. Manuf. Process, 1988, vol. 8, pp. 19–26.
55. [55] X. Gao, T. Wang and J. Kim: Int. J. Sol. Struct., 2005, vol. 42, pp. 5097–17.10.1016/j.ijsolstr.2005.02.028 ↗
56. [56] Q. Zhao, Z. Liu, T. Huang, P. Xia and F. Li: Mater. Charact., 2016, vol.119, pp. 47-54.10.1016/j.matchar.2016.07.015 ↗
57. [57] F. Goli and R. Jamaati: Mater. Letters, 2018, vol. 219, pp. 229–32.10.1016/j.matlet.2018.02.124 ↗