journal article·2019-02-15Open access

Analysis of Misorientation Relationships Between Austenite Parents and Twins

A. F. Brust, S. R. Niezgoda, V. A. Yardley, E. J. Payton

Abstract

The forward transformation from face centered cubic austenite to body centered cubic/tetragonal martensite in ferrous alloys can significantly in- fluence the microstructure and mechanical properties of the material. Inferring possible high temperature crystal orientations from observations of ambient temperature transformation microstructures is hindered by parent austenite- twin interactions and scatter in the orientation relationship. This creates a major limitation for studying variant selection phenomena and characteriz- ing microstructural response to high temperature thermomechanical process- ing conditions. In this work, composition tables are developed that detail the product variant boundary misorientation relationships for parent-parent, parent-twin and twin-twin boundary intersections for the Kurdjumov-Sachs (KS), Nishiyama-Wassermann (NW), and an experimentally determined irra- tional orientation relationship. The frequently referenced KS and NW ori- entation relationships produce significantly different results from experimental observations. Furthermore, the introduction of a twin into the parent austenite introduces a substantially larger number of misorientation relationships when the orientation relationship is irrational. The effects of crystal symmetry on misorientation results are determined by considering both body centered cu- bic and body centered tetragonal martensite structures. Lastly, it is observed that some shared variants are found between twins and parents when assuming cubic symmetry but not tetragonal symmetry. The results and relationships may be useful towards accurate and consistent reconstructions of the parent austenite microstructure from observations of martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. S. Morito, H. Tanaka, R. Konishi and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–1799.10.1016/S1359-6454(02)00577-3 ↗
2. H. Kitahara, R. Ueji, N. Tsuji, Y. Minamino, Acta Mater., 2006, vol. 54, pp. 1279-128810.1016/j.actamat.2005.11.001 ↗
3. G. Krauss, Hardenability Concepts with Applications to Steel (Warrendale, PA, AIME, 1978), pp. 229–248
4. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343–2357.10.1007/BF02814873 ↗
5. A. R. Marder and G. Krauss: ASM Trans., 1967, vol. 60, pp. 651–660.
6. V.A. Yardley, E.J. Payton, T. Matsuzaki, R. Sugiura, A.T. Yokobori Jr., S. Tsurekawa, Y. Hasegawa, Creep and Fracture of Engineering Materials and Structures. Proc. 12th Int. Conf. Creep and Fracture of Eng. Mater. and Struct. (JIMIS 11), held at Kyoto TERRSA, Kyoto, Japan, May 27 31, 2012, Edited by: K. Maruyama, F. Abe, M. Igarashi, K. Kishida, M. Suzuki, K. Yoshimi, The Jap. Ins. of Met, Sendai, 2012, paper C14
7. K. Kimura, N. Ohi, K. Shimazu and T. Matsuo: Scr. Mater., 1987, vol. 21, pp. 19–22.
8. V.A. Yardley, S. Fahimi and E.J. Payton: Mater. Sci. Technol, 2015, vol. 31, pp. 547–553.10.1179/1743284714Y.0000000603 ↗
9. S.H. Hong and J. Yu: Scr. Mater. 1989, vol. 23, pp. 1057–1062.
10. S. Matsuda, T. Inoue, H. Mimura, Y. Okamura, Climax Molybdenum Development Company, Ltd., Japan, 1971, pp. 45–66.
11. Z. Guo, C.S. Lee and J.W. Morris: Acta. Mater., 2004, vol. 52(19), pp. 5511–5518.10.1016/j.actamat.2004.08.011 ↗
12. S. Morito, H. Yoshida, T. Maki and X. Huang: J. Mat. Sci. Eng. A, 2006, 438–440, pp. 237–240.10.1016/j.msea.2005.12.048 ↗
13. S.K. Banerji, C.J. McMahon Jr. and H.C. Feng: Metall. Trans. A, 1978, vol. 9A, pp. 237–47.10.1007/BF02646706 ↗
14. R.M. Horn and R.O. Ritchie: Metall. Trans. A, 1978, vol. 9A, pp. 1039–53.10.1007/BF02652208 ↗
15. Z. Nishiyama: Sci. Rep., Tohoku Imperial Univ., vol. 23, pp. 637–64 (1934).
16. G. Wassermann: Über den Mechanismus der $$\alpha ->\gamma $$ Umwandlung des Eisens (On the Mechanism of the $$\alpha -> \gamma $$ Transformation of Iron). Mitteilungen aus dem Kais. Wilhelm. Inst. für Eisenforsch., vol. 17, pp. 149–55 (1935).
17. G. Kurdjumow, G. Sachs: Z. Physik, vol. 64, pp. 325–43 (1930).10.1007/BF01397346 ↗
18. J.W. Cahn, G. Kalonji: Proc. Int. Conf. Solid-Solid Phase Trans. Edited by: H.I. Aaronson, D.E. Laughlin, R.F. Sekerka and C.M. Wayman., The Met. Soc. of AIME (1982).
19. A. B. Greninger and A. R. Troiano: Metall. Trans., 1949, vol. 185, pp. 590–598.
20. M.S. Wechsler, D.S. Lieberman and T.A. Read: Trans. AIME, 1953, vol. 197, pp. 1503–1515.
21. J.S. Bowles and J.K. Mackenzie: Acta. Metall. 1954, vol. 2, pp. 129–137.10.1016/0001-6160(54)90102-9 ↗
22. J.K. Mackenzie, J.S. Bowles, Acta. Metall. 1954, vol. 2, pp. 138-14710.1016/0001-6160(54)90103-0 ↗
23. J.S. Bowles and J.K. Mackenzie: Acta. Metall. 1954, vol. 2, pp. 224–234.10.1016/0001-6160(54)90163-7 ↗
24. J.K. Mackenzie, J.S. Bowles, Acta. Metall. 1957, vol. 5, pp. 137-14910.1016/0001-6160(57)90018-4 ↗
25. J.S. Bowles and J.K. Mackenzie: Acta Metall. 1962, vol. 10, pp. 625–636.10.1016/0001-6160(62)90052-4 ↗
26. Z. Nishiyama, M.E. Fine, C.M. Wayman: Martensitic Transformation, Materials Science and Technology. Academic Press, New York, 1978.
27. C.M. Wayman, Introduction to the Crystallography of Martensitic Transformations. Macmillan, Macmillan Series in Materials Science (, 1964)
28. H. Kitahara, R. Ueji, M. Ueda, N. Tsuji and Y. Minamino: Mater. Charact., 2005, vol. 54, pp. 378–386.10.1016/j.matchar.2004.12.015 ↗
29. M. Nikravesh, M. Naderi, G.H. Akbari: Mater. Sci. Eng., 2012, vol. 540, pp. 24–29.10.1016/j.msea.2012.01.018 ↗
30. O. Sherby, J. Wadsworth, D. Lesuer, C. Syn: The c/a Ratio in Quenched Fe-C and Fe-N steels—A Heuristic Story. THERMEC, Vancouver, Canada, July 4-July 8 (2006).
31. V. Sinha, E.J. Payton, M. Gonzales, R.A. Abrahams, B.S. Song, Anal., vol. 6(6), pp. 610-618 (2017)10.1007/s13632-017-0403-4 ↗
32. E.J. Payton, A. Aghajani, F. Otto, G. Eggler and V.A. Yardley: Scr. Mater., 2012, vol. 66, pp. 1045–1048.10.1016/j.scriptamat.2012.02.042 ↗
33. C. Cayron: Acta Crystallogr., 2006, vol. 62(Pt 1), pp. 21–40.10.1107/S010876730503686X ↗
34. V.A. Yardley and E.J. Payton: Mater. Sci. Technol., 2014, vol. 30, pp. 1125–1130.10.1179/1743284714Y.0000000572 ↗
35. M. Natori, Y. Futamura, T. Tsuchiyama, S. Takaki: Scr. Mater., 2005, vol. 53, pp. 603–608.10.1016/j.scriptamat.2005.04.025 ↗
36. M. Abbasi, T.W. Nelson, and C.D. Sorensen: J. Appl. Crystallogr., 2013, vol. 46, pp. 716–725.10.1107/S0021889813008522 ↗
37. M. Abbasi, D.I. Kim, T.W. Nelso and M. Abbasi: Mater. Charact., 2014, vol. 95, pp. 219–231.10.1016/j.matchar.2014.06.023 ↗
38. G. Miyamoto, N. Iwata, N. Takayama and T. Furuhara: Acta Mater., 2010, vol. 58, pp. 6393–6403.10.1016/j.actamat.2010.08.001 ↗
39. S. Cluff, T. Nelson, R. Song, D. Fullwood, IOP Conf. Ser. Mater. Sci. Eng., vol. 375 (2018)10.1088/1757-899X/375/1/012012 ↗
40. A. Heinz and P. Neumann: Acta. Crstallogr. A, 1991, vol. A47, pp. 780–789.10.1107/S0108767391006864 ↗
41. J.W. Christian, Jour. Phys. Colloq, 1974, vol. 35, pp. 65-76
42. V. Randle, G.S. Rohrer, H.M. Miller, M. Coleman and G.T. Owen: Acta Mater., 2008, vol. 10, pp. 2363–2373.10.1016/j.actamat.2008.01.039 ↗
43. M.A. Bingham, B.K. Lograsso, F.C. Laabs, ULTRD6 110, 1312–1319 (2010)
44. Y.H. Chen, S.U. Park, D. Wei, G. Newstadt, M. Jackson, J.P. Simmons, M. De Graef, A.O. Hero: Microsc. Microanal., vol. 21, 2015, pp. 1–14.