journal article·2018-06Open access

Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V

Gnofam Jacques Tchein, Dimitri Jacquin, Dominique Coupard, Eric Lacoste, Franck Girot Mata

Abstract

This paper is focused on the genesis of microstructures in friction stir welding (FSW) of the Ti-6Al-4V alloy. Several titanium joints, initially prepared with four different preheat treatments, were processed by FSW. Detailed microstructural analyses were performed in order to investigate change in the microstructure during the process. In this work, the FSW processing allows a controlled and stable microstructure to be produced in the stirring zone, regardless of the initial heat treatment or the welding conditions. The welded material undergoes a severe thermomechanical treatment which can be divided into two steps. First, the friction in the shoulder and the plastic strain give rise to the necessary conditions to allow a continuous dynamic recrystallization of the β phase. This operation produces a fine and equiaxed β grain structure. Second, once the pin has moved away, the temperature decreases, and the material undergoes a heat treatment equivalent to air quenching. The material thus exhibits a β → β + α transformation with germination of a fine intergranular Widmanstatten phase within the ex-fully-recrystallized-β grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. V.S. Godiganur, S. Biradar: Int. J. Res. Eng. Technol., 2014, vol. 3, pp. 572–576.10.15623/ijret.2014.0315107 ↗
2. C. He, Y. Liu, J. Dong, Q. Wang, D. Wagner, C. Bathias: Int. J. Fatigue, 2015, vol. 81, pp. 171–178.10.1016/j.ijfatigue.2015.07.012 ↗
3. P. Cavaliere, A. Squillace, F. Panella: J. Mater. Process. Technol., 2008, vol. 200, pp. 364–372.10.1016/j.jmatprotec.2007.09.050 ↗
4. M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, H.R. Ammar: J. Mater. Process. Technol., 2017, vol. 242, pp. 77–91.10.1016/j.jmatprotec.2016.11.024 ↗
5. S.R. Kumar, V.S. Rao, R.V. Pranesh: Procedia Mater. Sci., 2014, vol. 5, pp. 1726–1735.10.1016/j.mspro.2014.07.362 ↗
6. M. Koilraj, V. Sundareswaran, S. Vijayan, S.R. Koteswara Rao: Mater. Des., 2012, vol. 42, pp. 1–7.10.1016/j.matdes.2012.02.016 ↗
7. A.H. Lotfi, S. Nourouzi: Metall. Mater. Trans. A., 2014, vol. 45, pp. 2792–2807.10.1007/s11661-014-2235-z ↗
8. Y.S. Sato, S.H.C. Park, A. Matsunaga, A. Honda, H. Kokawa: J. Mater. Sci., 2005, vol. 40, pp. 637–642.10.1007/s10853-005-6301-1 ↗
9. J. Chen, R. Ueji, H. Fujii: Mater. Des., 2015, vol. 76, pp. 181–189.10.1016/j.matdes.2015.03.040 ↗
10. S.H.C. Park, Y.S. Sato, H. Kokawa: Scr. Mater., 2003, vol. 49, pp. 161–166.10.1016/S1359-6462(03)00210-0 ↗
11. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park: Mater. Sci. Eng. A., 2008, vol. 488, pp. 25–30.10.1016/j.msea.2007.10.062 ↗
12. H. Fujii, Y. Sun, H. Kato, K. Nakata: Mater. Sci. Eng. A., 2010, vol. 527, pp. 3386–3391.10.1016/j.msea.2010.02.023 ↗
13. P Edwards, M Ramulu (2010) J. Eng. Mater. Technol. 132(031006):10.
14. Y.N. Zhang, X. Cao, S. Larose, P. Wanjara: Can. Metall. Q., 2012, vol. 51, pp. 250–261.10.1179/1879139512Y.0000000015 ↗
15. M.H. Shojaeefard, M. Akbari, A. Khalkhali, P. Asadi, A.H. Parivar: Mater. Des., 2014, vol. 64, pp. 660–666.10.1016/j.matdes.2014.08.014 ↗
16. Ş. Kasman: Int. J. Adv. Manuf. Technol., 2013, vol. 68, pp. 795–804.10.1007/s00170-012-4720-0 ↗
17. N.M. Daniolos, D.I. Pantelis: Int. J. Adv. Manuf. Technol., 2017, vol. 88, pp. 2497–2505.10.1007/s00170-016-8965-x ↗
18. Wang, J. Su, R.S. Mishra, R. Xu, J.A. Baumann: Wear., 2014, vol. 321, pp. 25–32.10.1016/j.wear.2014.09.010 ↗
19. A. Farias, G.F. Batalha, E.F. Prados, R. Magnabosco: Wear., 2013, vol. 302, pp. 1327–1333.10.1016/j.wear.2012.10.025 ↗
20. L. Zhou, H.J. Liu, P. Liu, Q.W. Liu: Scripta Mat., 2009, vol. 61, pp. 596–599.10.1016/j.scriptamat.2009.05.029 ↗
21. H.J. Liu, L. Zhou, Q.W. Liu: Mater. Des., 2010, vol. 31, pp. 1650–1655.10.1016/j.matdes.2009.08.025 ↗
22. P. Edwards, M. Ramulu: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 468–472.10.1179/136217110X12665778348425 ↗
23. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, S. Hirano: Mater. Sci. Eng. A., 2008, vol. 485, pp. 448–455.10.1016/j.msea.2007.08.051 ↗
24. S. Yoon, R. Ueji, H. Fujii: Mater. Charact., 2015, vol. 106, pp. 352–358.10.1016/j.matchar.2015.06.025 ↗
25. M. Esmaily, S. Nooshin Mortazavi, P. Todehfalah, M. Rashidi: Mater. Des., 2013, vol. 47, pp. 143–150.10.1016/j.matdes.2012.12.024 ↗
26. Y. Combres, C. Champin: Tech. Ing., 1995, M1335. 33, pp. 24.
27. ASM International, ed., Metallography and microstructures, New ed, American Society for Metals, Metals Park, Ohio, 2004.
28. B. Hocheid, R. Klima, C. Beauvais, M. Rapin, C. Roux: Mém Sci Rev Mét., 1970, vol. 72, pp. 583–590.
29. J. Su, J. Wang, R.S. Mishra, R. Xu, J.A. Baumann: Mater. Sci. Eng. A., 2013, vol. 573, pp. 67–74.10.1016/j.msea.2013.02.025 ↗
30. M. Humbert, L. Germain, N. Gey, E. Boucard: Acta Mater., 2015, vol. 82, pp. 137–144.10.1016/j.actamat.2014.09.007 ↗
31. S.C. Wang, M. Aindow, M.J. Starink: Acta Mater., 2003, vol. 51, pp. 2485–2503.10.1016/S1359-6454(03)00035-1 ↗
32. E. Ghasemi, A. Zarei-Hanzaki, E. Farabi, K. Tesař, A. Jäger, M. Rezaee: J. Alloys Compd., 2017, vol. 695, pp. 1706–1718.10.1016/j.jallcom.2016.10.322 ↗
33. X.G. Fan, H. Yang, P.F. Gao, R. Zuo, P.H. Lei: J. Mater. Process. Technol., 2016, vol. 234, pp. 290–299.10.1016/j.jmatprotec.2016.03.031 ↗
34. S. Lu, D. Ouyang, X. Cui, K. Wang: Trans. Nonferrous Met. Soc. China., 2016, vol. 26, pp. 1003–1010.10.1016/S1003-6326(16)64197-3 ↗
35. F. Montheillet, L. Pallot, D. Piot: 7th Int. Conf. on Processing and Manufacturing of Advanced Materials, THERMEC 2011, vol. 706–709, Quebec City, QC, 2012.10.4028/www.scientific.net/MSF.706-709.127 ↗
36. S. Gourdet, F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685–2699.10.1016/S1359-6454(03)00078-8 ↗
37. R. Ding, Z.X. Guo, A. Wilson: Mater. Sci. Eng. A., 2002, vol. 327, pp. 233–245.10.1016/S0921-5093(01)01531-3 ↗
38. A. Bardelcik, C.P. Salisbury, S. Winkler, M.A. Wells, M.J. Worswick: Lightweight Struct., 2010, vol. 37, pp. 694–702.
39. F. Le Maitre: Revue de Métallurgie, 1970, vol.67, pp. 563.