journal article·2017-05

The Experimental Characterization and Numerical Simulation of A-Segregates in 27SiMn Steel

Y. F. Cao, Y. Chen, P. X. Fu, H. W. Liu, D. Z. Li

Publisher page

Abstract

A 500-kg 27SiMn steel ingot has been produced via low-oxygen purifying technology and then fully dissected in the longitudinal center plane to investigate the typical features and formation mechanism of A-segregates. The macrostructure, microstructure, inclusions, cavity and solute segregation surrounding the A-segregates were characterized and analyzed in detail. It shows that the main solute components such as C, Si, and Mn, and even some large cavities accumulate obviously within the A-type channels. Owing to the low content of oxygen and other impurities, there is no apparent enrichment of the inclusions. Based on the classical theory of macrosegregation, driven by thermo-solutal buoyancy, A-segregates in the body of a 27SiMn steel ingot have been simulated successfully by using the multi-component continuum model. They disappear in a referred 1045 steel ingot. By comparing the evolution processes during solidification of both steels, it is demonstrated that the strong thermo-solutal convection originated from the high content of Si element in 27SiMn steel destabilizes the mushy zone and therefore induces the A-segregates. In terms of the occurrence zones of A-segregates and corresponding distributions of Rayleigh number, its critical value to predict the A-segregates in industrial steel ingots was proposed and then applied successfully.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. M.C. Flemings: ISIJ Int., 2000, vol. 40 (9), pp. 833–41.10.2355/isijinternational.40.833 ↗
2. C. Beckermann: Int. Mater. Rev., 2002, vol. 47 (5), pp. 243–61.10.1179/095066002225006557 ↗
3. G. Lesoult: Mater. Sci. Eng. A,2005, vol. 413-414, pp. 19-29.10.1016/j.msea.2005.08.203 ↗
4. E.J. Pickering: ISIJ Int., 2013, vol. 53 (6), pp. 935-49.10.2355/isijinternational.53.935 ↗
5. A. Ludwig, M. Wu, A. Kharicha: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 4854-67.10.1007/s11661-015-2959-4 ↗
6. M. Kawai: Tetsu-to-Hagane, 1956, 42(1), 14-18.10.2355/tetsutohagane1955.42.1_14 ↗
7. L.H. Shaw, J. Beech, R.H. Hickley: Ironmak. Steelmak., 1986, vol. 13 (3), pp. 154-60.
8. C. Maidorn, D, Blind: Nucl. Eng. Des., 1985, vol. 84 (2), pp. 285-96.10.1016/0029-5493(85)90199-2 ↗
9. Heterogeneity Sub-Committee of the British Iron and Steel Institute J. Iron Steel Inst.., 1926, vol. 113, pp. 39-151.
10. D.Z. Li, X.-Q. Chen, P.X. Fu, X.P. Ma, H.W. Liu, Y. Chen, Y.F. Cao, Y.K. Luan, Y.Y. Li: Nat. Commun., 2014, vol. 5, pp. 5572–79.10.1038/ncomms6572 ↗
11. E.J. Pickering, H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2983-97.10.1007/s11661-014-2253-x ↗
12. E.J. Pickering, C. Chesman, S. Al-Bermani, M. Holland, P. Davies, J.T. Silva: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 1860-74.10.1007/s11663-015-0386-y ↗
13. Y.F. Cao, Y. Chen, D.Z. Li: Acta Mater., 2016, vol. 107, pp. 325-36.10.1016/j.actamat.2016.02.004 ↗
14. R. Mehrabian R, M. Keane, M.C. Flemings: Metall. Trans., 1970, vol. 1, pp. 1209-20.10.1007/BF02900233 ↗
15. W.D. Bennon, F.P. Incropera: Metall. Trans., 1987, vol. 18, pp. 611-616.10.1007/BF02654275 ↗
16. C. Beckermann, R. Viskanta: PhysicoChem. Hydrodyn., 1988, vol. 10, pp. 195-213.
17. J. Ni, C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349-61.10.1007/BF02651234 ↗
18. C.Y. Wang, C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754-64.10.1007/BF02652369 ↗
19. M. Wu, A. Ludwig: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1613-31.10.1007/s11661-006-0104-0 ↗
20. H. Combeau, M. Zaloznik, S. Hans, P. Richy: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 289-304.10.1007/s11663-008-9178-y ↗
21. M. Wu, A. Ludwig: Acta Mater. 2009, vol. 57, pp. 5621-31.10.1016/j.actamat.2009.07.056 ↗
22. J. Li, M. Wu, A. Ludwig, A. Kharicha: Int. J. Heat Mass Transfer, 2014, vol. 72, pp. 668-79.10.1016/j.ijheatmasstransfer.2013.08.079 ↗
23. M. Ahmadein, M. Wu, A. Ludwig: J. Cryst. Growth, 2015, vol. 417, pp. 65-74.10.1016/j.jcrysgro.2014.07.039 ↗
24. M.C. Schneider, C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2373-88.10.1007/BF02671251 ↗
25. G. Guillemot, Ch.-A. Gandin, M.J. Bellet: J. Cryst. Growth, 2007, vol. 303, pp. 58-68.10.1016/j.jcrysgro.2006.12.076 ↗
26. L. Yuan, P.D. Lee: Acta Mater., 2012, vol. 60, pp. 4917-26.10.1016/j.actamat.2012.04.043 ↗
27. S. Karagadde, L. Yuan, N. Shevchenko, S. Eckert, P.D. Lee: Acta Mater., 2014, vol. 79, pp. 168-80.10.1016/j.actamat.2014.07.002 ↗
28. Y.F. Cao, Y. Chen, D.Z. Li, H.W. Liu, P.X. Fu: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2927-39.10.1007/s11661-016-3417-7 ↗
29. K. Suzuki, K. Taniguchi: Tetsu-to-Hagane, 1979, vol. 65, pp. 1581-8.10.2355/tetsutohagane1955.65.10_1581 ↗
30. D.R. Liu, B.G. Sang, X.H. Kang, D.Z. Li: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 210-24.10.1007/s11663-010-9426-9 ↗
31. J.M. Cabrera-Marrero, V. Carreno-Galindo, R.D. Morales, F. Chavez-Alcala: ISIJ Int., 1988, vol. 38, pp. 812-21.10.2355/isijinternational.38.812 ↗
32. K. Suzuki, T. Miyamoto: Tetsu-to-Hagane, 1977, vol.63, pp. 45-52.10.2355/tetsutohagane1955.63.1_45 ↗
33. S.W. Qian, X.Q. Hu, Y.F. Cao, X.H. Kang, D.Z. Li: Mater. Design, 2015, vol. 87, pp. 205-14.10.1016/j.matdes.2015.07.150 ↗
34. J. Li, M. Wu, J. Hao, A. Kharicha, A. Ludwig: Comp. Mater. Sci., 2012, vol.55, pp. 419-29.10.1016/j.commatsci.2011.12.021 ↗
35. M.T. Rad, P. Kotas, C. Beckermann: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4266-81.10.1007/s11661-013-1761-4 ↗
36. E.J. Pickering, S.S. Al-Bermani, J. Talamantes-Silva: Mater. Sci. Tech., 2015, vol. 31, pp. 1313-19.10.1179/1743284714Y.0000000692 ↗