journal article·2017-04Open access

Microstructure and Mechanical Properties of 21-6-9 Stainless Steel Electron Beam Welds

John W. Elmer, G. Fred Ellsworth, Jeffrey N. Florando, Ilya V. Golosker, Rupalee P. Mulay

Abstract

Welds can either be stronger or weaker than the base metals that they join depending on the microstructures that form in the fusion and heat-affected zones of the weld. In this paper, weld strengthening in the fusion zone of annealed 21-6-9 stainless steel is investigated using cross-weld tensile samples, hardness testing, and microstructural characterization. Due to the stronger nature of the weld, the cross-weld tensile tests failed in the base metal and were not able to generate true fusion zone mechanical properties. Nanoindentation with a spherical indenter was instead used to predict the tensile behavior for the weld metal. Extrapolation of the nanoindentation results to higher strains was performed using the Steinberg–Guinan and Johnson–Cook strength models, and the results can be used for weld strength modeling purposes. The results illustrate how microstructural refinement and residual ferrite formation in the weld fusion zone can be an effective strengthener for 21-6-9 stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. D.J. Alexander, and C.T. Necker: Los Alamos National Laboratory Report, LA-UR-11-02857, 2011.
2. M.E. Kassner, and R. Breithaup: Lawrence Livermore National Laboratory Report, UCRL-89779, 1983.
3. David Tabor: The Hardness of Metals, Oxford University Press, Oxford, UK, 1951.
4. S.R. Kalidindi and S. Pathak: Acta Met., 2008, vol. 56, pp. 3523.10.1016/j.actamat.2008.03.036 ↗
5. D. J. Steinberg, S.G. Cochran, M.W. Guinan: J. Appl. Phys., 1980, vol. 51, pp. 1498.10.1063/1.327799 ↗
6. G.R. Johnson, and W.H. Cook: Proceedings of the 7 th International Symposium on Ballistics, 1983, The Hague, Netherlands, p. 541.
7. J.W. Elmer, and T.W. Eagar: Weld. J., 1990, vol. 69, No. 4, pp. 141-s–150-s.
8. J.W. Elmer, and A.T. Teruya: Weld. J., 2001, vol. 80, No. 12, p. 288-s.
9. W.C. Oliver and G.M. Pharr: J. Mat. Res., 1992, vol. 7(06), pp. 1564-1583.10.1557/JMR.1992.1564 ↗
10. J.W. Elmer, S.M. Allen, and T.W. Eagar: Metall. Trans. A, 1989, vol. 20A, No. 10, p. 2117.10.1007/BF02650298 ↗
11. Aerospace Structural Materials Handbook, vol. 1 Ferrous Alloys, Battelle Columbus Division, 1987.
12. Donald Peckner and Irving Melvin Bernstein: Handbook of Stainless Steels, MGraw Hill, New York, NY, 1977.
13. C. Hills and H. Rack: Mat. Sci. and Eng., 1981, vol. 51, pp. 231.10.1016/0025-5416(81)90199-3 ↗
14. D.J. Steinberg, Lawrence Livermore National Laboratory Report, UCRL-MA-106439, 1991.
15. M. Tang, P. Norquist, N. Barton, K. Durrenberger, J. Florando, and A. Attia: Lawrence Livermore National Laboratory Report, LLNL-PROC-464065, 2010.
16. M. LeBlanc: Lawrence Livermore National Laboratory Report, ERD12-500013-AA, 2012.