journal article·2016-12

Effective Thermal and Electrical Conductivities of AgSnO2 During Sintering. Part I: Experimental Characterization and Mechanisms

Elodie Brisson, Patrick Carre, Henri Desplats, Philippe Rogeon, Vincent Keryvin, Alexandre Bonhomme

Publisher page

Abstract

The effective thermal and electrical conductivities of porous materials have a major influence on the temperature field inside the sample during resistance sintering (RS). Thermal and electrical effective conductivities of AgSnO2 can be calculated during sintering by using numerical modeling with constitutive equations, which consider microstructural transformations. In Part I of this investigation, the emphasis is on the development of an understanding of the microstructure–conductivity relationship starting from the “green” state to the fully sintered state during RS of AgSnO2. This work focuses on the characterization of the electrical and thermal effective conductivities of the porous composite material (AgSnO2), and on highlighting the mechanisms, which drive the evolutions of the effective conductivities and the microstructure. Measurements were achieved under different loadings (cold compaction, free sintering, Hot Pressing (HP), and RS). Results show that conductivities evolutions are mainly driven by the contact conditions between particles. Bonding diffusion between particles and grain deformation was identified as the main mechanism, which can enhance the contact area between particles. This work will provide all the essential information to define the constitutive equations, presented in details in Part II, to describe the evolutions of the effective conductivities during sintering processes, such as RS or HP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J. Jaćimović, L. Felberbaum, E. Giannini, J. Teyssier, J. Phys. D. Appl. Phys., 2014, vol. 47, pp. 125501.10.1088/0022-3727/47/12/125501 ↗
2. N. Ray, B. Kempf, T. Mützel, L. Froyen, K. Vanmeensel, J. Vleugels, Mater. Design, 2015, vol. 85, pp. 412-422.10.1016/j.matdes.2015.07.006 ↗
3. C.-H. Leung: Contact materials, silver graphite, silver-refractory-graphite, Q.J. Wang, and Y.-W. Chung, eds., Encyclopedia of Tribology, Springer, New York, 2013, pp. 468–70.10.1007/978-0-387-92897-5_403 ↗
4. C.-H. Leung, H. Kim, IEEE T. Compon. Hybrid, 1984, vol. 7, pp. 69–75.10.1109/TCHMT.1984.1136333 ↗
5. Qiao Xiuqing, Shen Qianhong, Zhang Lingjie, Chen Lawson, Fan Xianping, Yang Hui, Rare Metal Mat. Eng., 2014, vol. 43, Issue 11, pp. 2614–2618.10.1016/S1875-5372(15)60012-1 ↗
6. A. Neri: Ph.D. Thesis, Insa Lyon, France, 2009 (in French).
7. J. Lalande: Ph.D. Thesis, Université Pierre et Marie Curie Paris VI, France, 2002 (in French).
8. Q. Xiong, S. Wang, M. Xie, Y. Chen, J. Zhang, and S. Wang, Prec. Met., 2013, vol. 34, No. 4.
9. N. Atabaki, B.R. Baliga, Heat Mass Transfer, 2007, vol. 44, pp. 85–99.10.1007/s00231-007-0229-8 ↗
10. J. P. M. Florez, M.B.H. Mantelli, Gustavo G.V. Nuernberg, Int. J. Heat Mass Tran., 2013, vol. 66, pp. 868–878.10.1016/j.ijheatmasstransfer.2013.07.088 ↗
11. R. Orru, et al, Mater. Sci. Eng. R, 2009, vol. 63, pp. 127–287.10.1016/j.mser.2008.09.003 ↗
12. K. Inoue: Electric-discharge Sintering, Patent Number 3241956, 1966.
13. M. Omori, Mat. Sci. Eng. A, 2000, vol. 287, pp.183-188.10.1016/S0921-5093(00)00773-5 ↗
14. L. Stanciu, D. Quach, Ch. Faconti, J. R. Groza, F. Raether, J. Am. Ceram. Soc., 2007, vol. 90 [9], pp. 2716–2722.10.1111/j.1551-2916.2007.01778.x ↗
15. R. Chaim, Materials, 2016, 9, 280; doi:10.3390/ma9040280.10.3390/ma9040280 ↗
16. Z. Zhang, Z. Liu, J. Lu, X. Shen, F. Wang and Y. Wang, Scripta Materialia, 81 (2014) 56–59.10.1016/j.scriptamat.2014.03.011 ↗
17. B. McWilliams: Ph.D. Thesis, Drexel University, 2008.
18. J.M. Montes, F.G. Cuevas, J. Cintas, and P. Urban: Metall. Mater. Trans. A, 2015, vol. 46A, No. 2, pp. 963–980.10.1007/s11661-014-2643-0 ↗
19. A. Birnboim, T. Olorunyolemi,Y. Carmel, J. Am. Ceram. Soc., 2001, vol. 84 [6], pp. 1315–20.10.1111/j.1151-2916.2001.tb00835.x ↗
20. K. Vafai: Handbook of Porous Media, 3rd ed., CRC Press, Boca Raton, 2015.10.1201/b18614 ↗
21. T. Olorunyolemi, A. Birnboim, Y. Carmel, O. C. Wilson Jr., I. Knowlton Lloyd, J. Am. Ceram. Soc., 2002, vol. 85 [5], pp. 1249-53.10.1111/j.1151-2916.2002.tb00253.x ↗
22. M. Bahrami, M. Yovanovich, R.J. Culham, Int. J. Heat Mass Tran., 2006, vol. 49, pp. 3691–3701.10.1016/j.ijheatmasstransfer.2006.02.021 ↗
23. H.V. Atkinson, and S. Davies: Metall. Mater. Trans. A, 2000, Vol. 31A, pp. 2981–3000.10.1007/s11661-000-0078-2 ↗
24. D. Bouvard: Métallurgie des poudres, Hermes Science - Editions Lavoisier, 2002.
25. R.M. German: Particle Packing Characteristics, Metal Powder Industries Federation, Princeton, NJ. ISBN: 0-918404-83-5. 1989.
26. J.C. Koh, A. Fortini, Int. J. Heat Mass Tran., 1973, vol. 16, pp. 2013–2022.10.1016/0017-9310(73)90104-X ↗
27. M.I. Aivazov, I.A. Domashnev: Influence of porosity on the conductivity of hot-pressed titanium-nitride specimens, Institute for New Chemical Problems, Academy of Sciences of the USSR. Translated from Proshkovaya Metallurgiya, 1968, Vol. 8, No. 9, pp. 51–54.10.1007/BF00773737 ↗
28. C. Argento, and D. Bouvard: Int. J. Heat Mass Tranf., 1996, Vol. 39, pp. 1343–1350.10.1016/0017-9310(95)00257-X ↗
29. J.C. Maxwell, Electricity and Magnetism, Clarendon Press, London, 1873.
30. T.H. Bauer: Int. J. Heat Mass Transf., 1993, Vol. 36, No. 17, pp. 4181–4191.10.1016/0017-9310(93)90080-P ↗
31. G.R. Hadley, Int. J. Heat Mass Tran., 1986, vol. 29, pp. 909–920.10.1016/0017-9310(86)90186-9 ↗
32. B. Jang, and H. Matsubara: J. Alloy Compd, 2006, vol. 419, No. 1–2, pp. 243–24610.1016/j.jallcom.2005.08.072 ↗
33. D.P.H. Hasselman: J. Am. Ceram. Soc. Bull., 1987, Vol. 66, No. 5.
34. A. Fuentes, P. Carre, P. Rogeon, T. Loulou, and G. Sierra: Journées Internationales de Thermique, Djerba, Tunisie, 27–29 mars 2009.
35. E. Brisson: Ph. D. Thesis, Université Bretagne Sud Lorient, France 2014 (in French).