journal article·2016-06

Study on the Formation and Precipitation Mechanism of Mn5Si3 Phase in the MBA-2 Brass Alloy

Hang Li, Jinchuan Jie, Pengchao Zhang, Chunxu Jia, Tongmin Wang, Tingju Li

Publisher page

Abstract

Mn5Si3 is an attractive dispersion in the special brass, owing to its high hardness and high wear resistance. In the present study, synchrotron X-ray radiography and rapid cooling were applied to investigate the formation mechanism of Mn5Si3 phase in the MBA-2 brass alloy. The primary Mn5Si3 phase is proved to exist stably in the alloy melt and nucleate from the melt at temperatures above 1373 K (1100 °C). In addition, the precipitation mechanism of Mn5Si3 phase is addressed systematically by the isothermal heat treatment. The Mn5Si3 particles are observed to precipitate from the matrix at temperatures above 1023 K (750 °C), and a crystallographic orientation relationship is found between the precipitated Mn5Si3 particle and β phase: $$ (110)\beta //(1\overline{1} 00)_{{{\text{Mn}}5 {\text{Si}}3 }} $$ and $$ [\overline{1} 11]\beta //[11\overline{2} \overline{2} ]_{{{\text{Mn}}5 {\text{Si}}3 }} $$ . However, the precipitation of Mn5Si3 phase is thermodynamically inhibited at lower temperatures, which can be ascribed to the increase in the Gibbs free energy of formation of Mn5Si3 with decreasing the temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H. Mindivan, H. Çimenoglu, and E.S. Kayali: Wear, 2003, vol. 254, pp. 532–537.10.1016/S0043-1648(03)00023-1 ↗
2. A. Waheed and N. Ridley: J. Mater. Sci., 1994, vol. 29, pp. 1692–1699.10.1007/BF00368948 ↗
3. M. Sundberg, R. Sundberg, S. Hogmark, S. Otterberg, B. Lehtinen, S.E. Hörnström and S.E. Karlsson: Wear, 1987, vol. 115, pp. 151–165.10.1016/0043-1648(87)90206-7 ↗
4. K. Elleuch, R. Elleuch, R. Mnif, V. Fridrici and P. Kapsa: Tribol. Int., 2006, vol. 39, pp. 290–296.10.1016/j.triboint.2005.01.036 ↗
5. C.R. Brooks: Heat treatment, structure and properties of nonferrous alloys, American Society for Metals, Ohio, 1982.
6. Y.S. Sun, G.W. Lorimer and N. Ridley: Metall. Mater. Trans. A, 1989, vol. 20, pp. 1199–1206.10.1007/BF02647401 ↗
7. Q.C. Jiang, C.L. Xu, M. Lu and H.Y. Wang: Mater. Lett., 2005, vol. 59, pp. 624–628.10.1016/j.matlet.2004.10.042 ↗
8. B.K. Prasad, K. Venkateswarlu, O.P. Modi and A.H. Yegneswaran: J. Mater. Sci. Lett., 1996, vol. 15, pp. 1773–1776.10.1007/BF00275338 ↗
9. H.M. Lus, G. Ozer, K.A. Guler, E. Erzi and D. Dispinar: Int. J. Cast Metal. Res., 2015, vol. 28, pp. 59–64.10.1179/1743133614Y.0000000131 ↗
10. Q.L. Li, F.B. Li, T.D. Xia, Y.F. Lan, Y.S. Jian and F. Tao: J. Alloys Comp., 2015, vol. 627, pp. 352–358.10.1016/j.jallcom.2014.11.212 ↗
11. N.Y. Titarev, V.Y. Moroz and A.G. Melakh: Met. Sci. Heat Treat., 1986, vol. 28, pp. 828–832.10.1007/BF00707097 ↗
12. G.C. Gu, R. Pesci, L. Langlois, E. Becker, R. Bigot and M.X. Guo: Acta Mater., 2014, vol. 66, pp. 118–131.10.1016/j.actamat.2013.11.075 ↗
13. S. Terzi, J.A. Taylor, Y.H. Cho, L. Salvo, M. Suery, E. Boller, and A.K. Dahle: Acta Mater., 2010, vol. 58, pp. 5370–5380.10.1016/j.actamat.2010.06.012 ↗
14. A.G. Murphy, D.J. Browne, W.U. Mirihanage and R.H. Mathiesen: Acta Mater., 2013, vol. 61, pp. 4559–4571.10.1016/j.actamat.2013.04.024 ↗
15. A. Inoue, A. Kato, T. Zhang, S.G. Kim and T. Masumoto: Mater. T. JIM, 1991, vol. 32, pp. 609–616.10.2320/matertrans1989.32.609 ↗
16. R.C. Triveno, M.M. Peres, C. Bolfarini, W.J. Botta and C.S. Kiminami: J. Alloys Comp., 2010, vol. 495, pp. 386–390.10.1016/j.jallcom.2009.12.120 ↗
17. KY. Kim, J.B. Jeon, and J.S. Shin: Cryst. Res. Technol., 2014, vol. 49, pp. 761–767.10.1002/crat.201400074 ↗
18. J.A. Dean: The analytical chemistry handbook, McGraw Hill, New York, 1995.
19. J. Ribis and Y. Carlan: Acta Mater., 2012, vol. 60, pp. 238–252.10.1016/j.actamat.2011.09.042 ↗
20. U. Borggren and M. Selleby: J. Phase Equilib., 2003, vol. 24, pp. 110–121.10.1361/105497103770330721 ↗
21. P. Villars, A. Prince and H. Okamoto: Handbook of Ternary Alloys of Phase Diagrams, 1997, ASM International, Ohio, pp. 9686–9693.
22. Y.A. Chang, J.P. Neuman, A. Mikula and D. Goldberg: Phase diagrams and thermodynamic properties of ternary copper metal systems, International Copper Research Association, USA, 1979.
23. J. Miettinen: Calphad, 2003, vol. 27, pp. 395–401.10.1016/j.calphad.2004.01.002 ↗
24. S.H. Liu, Y. Du, C. Zhang, H.H. Xu, B.Y. Huang, J.L. Liang, Y.C. Zhou, F. Zheng and Y.W. Li: J. Alloys Comp., 2010, vol. 492, 190–195.10.1016/j.jallcom.2009.11.176 ↗
25. W.F. Gale and T.C. Totemeier: Smithells metals reference book, 8th edn, p. 258, Elsevier Butterworth–Heinemann, Oxford, 2004.
26. S.C. Lumley, R.W. Grimes, S.T. Murphy, P.A. Burr, A. Chroneos, P.R. Chard-Tuckey and M.R. Wenman: Acta Mater., 2014, vol. 79, pp. 351–362.10.1016/j.actamat.2014.07.019 ↗