journal article·2010-10

In-Situ Synthesis of Cu/Cr-Al2O3 Nanocomposite by Mechanical Alloying and Heat Treatment

Saeed Sheibani, Abolghasem Ataie, Saeed Heshmati-Manesh

Publisher page

Abstract

In this article, a novel method has been used to prepare a copper matrix nanocomposite containing Cu-10 wt pct Cr-10 wt pct Al2O3 by heat treatment of the mechanically activated Cu, Al, and Cr2O3 powder mixture. Structural evolutions were investigated using the X-ray diffraction (XRD) technique. The microstructure of samples was examined using scanning electron microscopy (SEM). It was found that during the milling process, Cu(Al) solid solution and Cu9Al4 phase were formed as the intermediate products, and therefore, Al activity was decreased. Hence, the reduction of Cr2O3 with Al was prevented during the ball milling stage. Further heat treatment carried out under argon atmosphere at 900 °C for 8 hours resulted in completion of Cr2O3 reduction by Al.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S.C. Tjong and K.C. Lau: Mater. Sci. Eng. A, 2000, vol. 282, pp. 183–86.10.1016/S0921-5093(99)00752-2 ↗
2. J. Lee, J.Y. Jung, E.-S. Lee, W.J. Park, S. Ahn, and N.J. Kim: Mater. Sci. Eng. A, 2000, vol. 277, pp. 274–83.10.1016/S0921-5093(99)00551-1 ↗
3. Y.-F. Lee and S.-L. Lee: Scripta Mater., 1999, vol. 7, pp. 773–78.10.1016/S1359-6462(99)00216-X ↗
4. D. Raabe and U. Hangen: Acta Mater., 1996, vol. 44, pp. 953–61.10.1016/1359-6454(95)00239-1 ↗
5. C. Biselli and D.G. Morris: Acta Metall. Mater., 1996, vol. 44, pp. 493–504.10.1016/1359-6454(95)00212-X ↗
6. S.I. Hong, M.A. Hill, Y. Sakai, J.T. Wood, and J.D. Embury: Acta Metall. Mater., 1995, vol. 43, pp. 3313–23.10.1016/0956-7151(95)00050-6 ↗
7. Y. Jin, K. Adachi, T. Takeuchi, and H.G. Suzuki: Appl. Phys. Lett., 1996, vol. 69, pp. 1391–92.10.1063/1.117591 ↗
8. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
9. S. Sheibani, A. Ataie, and S. Heshmati-Manesh: J. Alloys Compd., 2008, vol. 455, pp. 447–53.10.1016/j.jallcom.2007.01.133 ↗
10. G.B. Schaffer and P.G. McCormick: Metall. Trans. A, 1991, vol. 22A, pp. 3019–24.10.1007/BF02650262 ↗
11. S. Sheibani, M. Khakbiz, and M. Omidi: J. Alloys Compd., 2009, vol. 477, pp. 683–87.10.1016/j.jallcom.2008.10.095 ↗
12. N. Parvin, R. Assadifard, P. Safarzadeh, S. Sheibani, and P. Marashi: Mater. Sci. Eng. A, 2008, vol. 492, pp. 134–40.10.1016/j.msea.2008.05.004 ↗
13. P. Matteazzi and G. Le Caer: J. Am. Ceram. Soc., 1992, vol. 75, pp. 2749–55.10.1111/j.1151-2916.1992.tb05499.x ↗
14. J.L. Guichard, O. Tillement, and A. Mocellin: J. Eur. Ceram. Soc., 1998, vol. 18, pp. 1143–52.10.1016/S0955-2219(98)00009-0 ↗
15. D.R. Gaskell: Introduction to Metallurgical Thermodynamics, 3rd ed., McGraw-Hill, New York, NY, 1981.
16. L. Takacs: Prog. Mater. Sci., 2002, vol. 47, pp. 355–461.10.1016/S0079-6425(01)00002-0 ↗
17. D.Y. Ying and D.L. Zhang: Mater. Sci. Eng. A, 2003, vol. 361, pp. 321–30.10.1016/S0921-5093(03)00567-7 ↗
18. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
19. H. Lipson and H. Steeple: Interpretation of X-ray Powder Diffraction Patterns, Macmillan, London, 1970.
20. J.B. Correia, H.A. Davies, and C.M. Sellars: Acta Mater., 1997, vol. 45, pp. 177–90.10.1016/S1359-6454(96)00142-5 ↗
21. V.A. Lubarda: Mech. Mater., 2003, vol. 35, pp. 53–68.10.1016/S0167-6636(02)00196-5 ↗
22. D.Y. Ying and D.L. Zhang: Mater. Sci. Eng. A., 2000, vol. 286, pp. 152–56.10.1016/S0921-5093(00)00627-4 ↗
23. S.J. Dong, Y. Zhou, Y.W. Shi, and B.H. Chang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1275–80.10.1007/s11661-002-0228-9 ↗
24. D. Das, P.P. Chatterjee, I. Manna, and S.K. Pabi: Scripta Mater., 1999, vol. 41, pp. 861–66.10.1016/S1359-6462(99)00220-1 ↗