journal article·2016-09

Dilatometric Analysis and Microstructural Investigation of the Sintering Mechanisms of Blended Elemental Ti-6Al-4V Powders

Youngmoo Kim, Junho Lee, Bin Lee, Ho Jin Ryu, Soon Hyung Hong

Publisher page

Abstract

The densification behavior of mixed Ti and Al/V master alloy powders for Ti-6Al-4V was investigated by a series of dilatometry tests to measure the shrinkage of the samples with the sintering temperature. The corresponding microstructural changes were examined under various sintering conditions with optical microscopy, energy-dispersive spectroscopy, and X-ray diffraction analyses. From these results, the consolidation of the mixed powders was divided into two domains: (i) sintering densification and solute homogenization of Ti and Al/V master alloy particles below 1293 K (1020 °C), and (ii) densification of Ti alloy phases above 1293 K (1020 °C). In the lower temperature region, the inter-diffusion between Ti and Al/V master alloy particles dominated the sintering of the mixed powders because the chemical gradient between two types of particles outweighed the surface energy reduction. Following chemical homogenization, the densification induced the shrinkage of the Ti alloy phases to reduce their surface energies. These tendencies are also supported by the density and grain size variations of the sintered specimens with temperature. The apparent activation energies of the sintering and grain growth for Ti alloy particles are 85.91 ± 6.93 and 37.33 kJ/mol, respectively, similar to or slightly lower than those of pure Ti particles. The difference was attributed to the slower self-diffusion of Ti resulting from the alloying of Al and V into in the Ti matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. C. Leyens and M. Peters: Titanium and Titanium Alloys, Wiley-VCH GmbH, Weinheim, 2003, pp.1-3.10.1002/3527602119 ↗
2. F.H. Froes and D. Eylon: Int. Mater. Rev, 1990, vol. 35, pp. 162-184.10.1179/095066090790323984 ↗
3. M. Qian: Int. J. Powder Metall., 2010, vol. 46, pp. 29-44.
4. J.D. Paramore, Z.Z. Fang, P. Sun, M. Koopman, K.S.R. Chandran, M. Dunstan: Scripta Mater., 2015, vol. 107, pp. 103-106.10.1016/j.scriptamat.2015.05.032 ↗
5. P. Kumar, K.S.R. Chandran, F. Cao, M. Koopman, Z.Z. Fang: Metall. Mat. Trans. A., 2016, online available
6. D.M. Bowden and W.H. Peter: DE-EE0003480, The Boeing Company, St. Louis, MO, 2012.
7. Anon.: Metal Powder Report, 2006, vol. 61, pp. 4.10.1016/S0026-0657(06)70558-6 ↗
8. J.E. Barnes, W. Peter and C.A. Blue: Mater. Sci. Forum, 2009, Vol. 618-79, pp.165-8.10.4028/www.scientific.net/MSF.618-619.165 ↗
9. M. Qian and F.H. Froes: Titanium Powder Metallurgy, Butterworth-Heinemann, Oxford, UK, 2015, pp. 299-312.
10. B.B. Panigrahi, M.M. Godkhindi, K. Das, P.G. Mukunda and P. Ramakrishnan: Mater. Sci. Eng. A., 2005, vol. 396, pp.255-262.10.1016/j.msea.2005.01.016 ↗
11. B.B. Panigrahi, M.M. Godkhindi: J. Mater. Res., 2005, vol. 20, pp.827-36.10.1557/JMR.2005.0116 ↗
12. B.B. Panigrahi, M.M. Godkhindi: Intermetallics, 2006, vol. 14, pp.130-5.10.1016/j.intermet.2005.04.020 ↗
13. Y.F. Yang, S.D. Luo, G.B. Schaffer and M. Qian: Metall. Mat. Trans. A., 2012, vol. 43, pp. 4896-90610.1007/s11661-012-1272-8 ↗
14. Y.F. Yang, S.D. Luo, G.B. Schaffer and M. Qian: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6719-2610.1016/j.msea.2011.05.041 ↗
15. S. Abkowitz, J.M. Siergiej and R.D. Regan: Mod. Dev. Powder Metall., 1971, vol. 4, pp.501-11.
16. J.E. Smugeresky and D.B. Dowson: Powder Tech., 1981, vol.30, pp.87-94.10.1016/0032-5910(81)85030-9 ↗
17. T. Fujita, A. Ogawa, C. Ouchi, H. Tajima: Mater. Sci. Eng. A., 1996, vol. 213, pp. 148-53.10.1016/0921-5093(96)10232-X ↗
18. O.M. Ivasishin, V.M. Anokhin, A.N. Demidik and D.G. Savvakin: Key Eng. Mat.,2000, vol.188, pp.55-62.10.4028/www.scientific.net/KEM.188.55 ↗
19. O.M. Ivasishin, D. Eylon, V.I. Bondarchuk and D.G. Savvakin: Defect Diffus. Forum, 2008, vol.277, pp. 177-85
20. O.M. Ivasishin, V.M. Anokhin, A.N. Demidik and D.G. Savvakin: Key Eng. Mat.,2000, vol.188, pp.55-62.10.4028/www.scientific.net/KEM.188.55 ↗
21. Aerospace Material Specification (AMS) 4998, Titanium Alloy Powder (6Al-4V)
22. M.I. Mendelson: J. Am. Ceram. Soc., 1969, vol.52, pp.443-610.1111/j.1151-2916.1969.tb11975.x ↗
23. L.C. Pathak, S.K. Mishra, P.G. Mukunda, M.M. Godkhindi, D. Bhattacharya and K.L. Chopra: J. Mater. Sci., 1994, vol.29, pp.5455-6110.1007/BF01171561 ↗
24. J.R. Groza and R.J. Dowding: Nanostruct. Mater., 1996, vol.7, pp.749-6810.1016/S0965-9773(96)00046-3 ↗
25. M. Koppers, CHR. Herzig, M. Friesel and Y. Mishin: Acta Mater., 1997, vol.45, pp.4181-97.10.1016/S1359-6454(97)00078-5 ↗
26. J.F. Murdock and C.J. McHargue, Acta Metall., 1968, vol.16, pp.493-50910.1016/0001-6160(68)90123-5 ↗