Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation
Source abstract
Abstract
The cutting process is now combined with machining, milling, or drilling as one of the widespread manufacturing operations. It is used across various fields of engineering. From an economical point of view, it is desirable to maintain the process in the most effective way in terms of the fracture surface quality or minimizing the burr. It is not possible to manage this experimentally in mass production. Therefore, it is convenient to use numerical computation. To include the crack initiation and propagation in the computations, it is necessary to implement a suitable ductile fracture criterion. Uncoupled ductile fracture models need to be calibrated first from fracture tests when the test selection is crucial. In the present article, there were selected widespread uncoupled ductile fracture models calibrated with, among others, an extremely low-stress triaxiality test realized through the compression of a cylinder with a specific recess. The whole experimental program together with the cutting process experiment were carried out on AISI 1045 carbon steel. After the fracture models were calibrated and the cutting process was simulated with their use, fracture surfaces and force responses from computations were compared with those experimentally obtained and concluding remarks were made.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A.M. Freudenthal: The Inelastic Behavior of Engineering Materials and Structures, Wiley, New York, 1950.
2. M.G. Cockcroft and D.J. Latham: J. Inst. Metals, 1968, vol. 96, pp. 33-9.
3. S.P. Keeler and W.A. Backofen: Trans. ASM, 1963, vol. 56, pp. 25-48.
4. A.K. Ghosh: Metall. Trans. A, 1976, vol. 7A, pp. 523-33.10.1007/BF02643968 ↗
5. K.S. Raghavan: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2075-84.10.1007/BF02670679 ↗
6. A.G. Atkins: J. Mater. Process. Technol., 1996, vol. 56, pp. 609-18.10.1016/0924-0136(95)01875-1 ↗
7. Y. Lou, H. Huh, S. Lim, and K. Pack: Int. J. Solids Struct., 2012, vol. 49, pp. 3605-15.10.1016/j.ijsolstr.2012.02.016 ↗
8. G.R. Johnson and W.H. Cook: Eng. Fract. Mech., 1985, vol. 21, pp. 31-48.10.1016/0013-7944(85)90052-9 ↗
9. Y. Bao and T. Wierzbicki: Int. J. Mech. Sci., 2004, vol. 46, pp. 81-98.10.1016/j.ijmecsci.2004.02.006 ↗
10. M.L. Wilkins, R.D. Streit, and J.E. Reaugh: Technical Report UCRL-53058, Lawrence Livermore National Laboratory, California, 1980.
11. T. Wiezbicki, Y. Bao, Y.-W. Lee, and Y. Bai: Int. J. Mech. Sci., 2005, vol. 47, pp. 719-43.10.1016/j.ijmecsci.2005.03.003 ↗
12. Y. Bai and T. Wierzbicki: Int. J. Plast., 2008, vol. 24, pp. 1071-96.10.1016/j.ijplas.2007.09.004 ↗
13. Y. Lou, J.-W. Yoon, and H. Huh: Int. J. Plast., 2014, vol. 54, pp. 56-80.10.1016/j.ijplas.2013.08.006 ↗
14. A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6A, pp. 825-37.10.1007/BF02672306 ↗
15. I.E. French and P.W. Weinrich: Metall. Trans. A, 1975, vol. 6A, pp. 1165-9.10.1007/BF02658524 ↗
16. J.R. Rice and D.M. Tracey: J. Mech. Phys. Solids, 1969, vol. 17, pp. 201-17.10.1016/0022-5096(69)90033-7 ↗
17. M.D. Dighe, A.M. Gokhale, and M.F. Horstemeyer: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 555-65.10.1007/s11661-002-0117-2 ↗
18. Q.G. Wang: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2887–99.10.1007/s11661-003-0189-7 ↗
19. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
20. M.E. Karabin, F. Barlat, and R.T. Shuey: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 354-64.10.1007/s11661-008-9705-0 ↗
21. Q. Puydt, S. Flouriot, S. Ringeval, F. De Geuser, R. Estevez, and G. Parry: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6141-52.10.1007/s11661-014-2567-8 ↗
22. L. Xue: Int. J. Solids Struct., 2007, vol. 44, pp. 5163–81.10.1016/j.ijsolstr.2006.12.026 ↗
23. M.A. Bhatia, N.K. Solanki, A. Moitra, and M.A. Tschopp: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 617–26.10.1007/s11661-012-1082-z ↗
24. Y. Bai and T. Wierzbicki: Eng. Fract. Mech., 2015, vol. 135, pp. 147–67.10.1016/j.engfracmech.2014.12.023 ↗
25. W.F. Fan and J.H. Li: Mater. Sci. Eng. A, 2009, vol. 499, pp. 248–51.10.1016/j.msea.2007.11.108 ↗
26. J. Xu, B. Guo, and D. Shan: Int. J. Adv. Manuf. Technol., 2011, vol. 56, pp. 515–22.10.1007/s00170-011-3194-9 ↗
27. F.A. Aparicio, J.A. Cortes Ramirez, and L.L. Lezama: J. Manuf. Proc., 2014, vol. 16, pp. 356–62.10.1016/j.jmapro.2014.03.002 ↗
28. A. Bacha, D. Daniel, and H. Klocker: J. Mater. Proc. Technol., 2008, vol. 203, pp. 480–97.10.1016/j.jmatprotec.2007.10.054 ↗
29. S.F. Golovashchenko, A.J. Gillard, A.V. Mamutov, J.F. Bonnen, and Z. Tang: J. Mater. Proc. Technol., 2014, vol. 214, pp. 1027–43.10.1016/j.jmatprotec.2013.09.003 ↗
30. K. Komori: Int. J. Mech. Sci., vol. 68, pp. 150–59.10.1016/j.ijmecsci.2013.01.009 ↗
31. H.-S. Choi, B.-M. Kim, and D.-Ch. Ko: J. Mech. Sci. Technol., 2014, vol. 28, pp. 2319–28.10.1007/s12206-014-0522-7 ↗
32. G. La Rosa, A. Risitano, and G. Mirone: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 615–24.10.1007/s11661-003-0096-y ↗
33. M.S. Joun, J.G. Eom, and M.C. Lee: Mech. Mater., 2008, vol. 40, pp. 586-93.10.1016/j.mechmat.2007.11.006 ↗
34. W. Lüders: Polyt. J., 1860, pp. 18–22.
35. A.H Cottrell: Prog. Metall. Phys., 1949, vol. 1, pp. 77–96.10.1016/0502-8205(49)90004-0 ↗
36. J.H. Hollomon: Metall. Technol., 1945, pp. 268–90.
37. 37. Y. Lou and H. Huh: Int. J. Solids Struct., 2013, vol. 50, pp. 447-55.10.1016/j.ijsolstr.2012.10.007 ↗
38. X. Gao and G. Zhang: Int. J. Dam. Mech., 2010, vol. 19, pp. 75-94.10.1177/1056789509101917 ↗
39. E. Dohnalová: Analysis of Circular Bars Shearing Process, Brno University of Technology, Brno, 2009.
40. A.S. Khan and H. Liu: Int. J. Plast., 2012, vol. 35, pp. 1-12.10.1016/j.ijplas.2012.01.003 ↗