journal article·2016-04Open access

Does Shear Thickening Occur in Semisolid Metals?

Helen V. Atkinson, Veronique Favier

Abstract

Abstract In the various forms of semisolid processing such as thixoforming and thixoforging, the entry into the die occurs in a fraction of a second so it is the transient rheological behavior which governs the initial stages of flow. In experiments in the literature, this rheological behavior is probed through applying rapid transitions in shear rate under isothermal conditions. There is contradictory evidence as to whether the behavior during these transitions is shear thinning or shear thickening, although it is clear that once in the die the material is thinning. Here the data in the literature are reanalyzed to obtain a rationalization of the contradictions which has not previously been available. It is argued that if a suspension is initially in a disagglomerated state (i.e., one which is initially sheared), the instantaneous behavior with a jump-up in shear rate is shear thickening (even if the long-term steady-state behavior is shear thinning) provided the fraction solid is greater than about 0.36 and the final shear rate at the end of the jump is greater than about 100 s−1. If the jump-up in shear rate is made from rest then yield masks the shear thickening.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. H.V. Atkinson: Progress in Materials Science, 2005, vol. 50, pp. 341-412.10.1016/j.pmatsci.2004.04.003 ↗
2. D.B. Spencer, R. Mehrabian and M.C. Flemings: Metallurgical Transactions, 1972, vol. 3, pp. 1925-32.10.1007/BF02642580 ↗
3. M.C. Flemings: Metallurgical Transactions A, 1991, vol. 22A, pp. 957-81.10.1007/BF02661090 ↗
4. V. Favier and H.V. Atkinson: Acta Materialia, 2011, vol. 59, pp. 1271-80.10.1016/j.actamat.2010.10.059 ↗
5. H.A. Barnes: J. Rheol., 1989, vol. 33, pp. 329-66.10.1122/1.550017 ↗
6. E. Brown, N.A. Forman, C.S. Orellana, H. Zhang, B.W. Maynor, D.E. Betts, J.M. DeSimone and H.M. Jaeger: Nature Materials Letters, 2010, vol. 9, pp. 220-224.10.1038/nmat2627 ↗
7. J.F. Brady and G. Bossis: Journal of Fluid Mechanics, 1985, vol. 155, pp. 105-129.10.1017/S0022112085001732 ↗
8. B.J. Maranzano and N.J. Wagner: J. Chem. Phys., 2001, vol. 114, pp. 10514-10527.10.1063/1.1373687 ↗
9. R.L. Hoffmann: Adv. Colloid Interface Sci., 1982, vol. 17, pp. 161-84.10.1016/0001-8686(82)80017-1 ↗
10. D. Lootens, H. van Damme, Y. Hémar, and P. Hébraud: Phys. Rev. Lett., 2005, vol. 95, Article No. 268302.10.1103/PhysRevLett.95.268302 ↗
11. A. Fall, N. Huang, F. Bertrand, G. Ovarlez, and D. Bonn: Phys. Rev. Lett., 2008, vol. 100, Article No. 018301.10.1103/PhysRevLett.100.018301 ↗
12. E. Brown and H.M. Jaeger: Science, 2011, vol. 333, pp. 1230-31.10.1126/science.1211155 ↗
13. E. Brown and H.M. Jaeger: J. Rheol., 2012, vol. 56, pp. 875-923.10.1122/1.4709423 ↗
14. V. Favier, P. Cezard and R. Bigot, Mater. Sci. Eng. A, 2009, vol. 517, pp. 8-16.10.1016/j.msea.2009.03.018 ↗
15. E. Brown and H.M. Jaeger: Rep. Prog. Phys., 2014, vol. 77, Article No. 046602.10.1088/0034-4885/77/4/046602 ↗
16. P.C.F. Møller, J. Mewis and D. Bonn: Soft Matter, 2006, vol. 2, pp. 274-83.10.1039/b517840a ↗
17. A.R.A. McLelland, N.G. Henderson, H.V. Atkinson and D.H. Kirkwood: Materials Science and Engineering A, 1997, vol. A232, pp. 110-18.10.1016/S0921-5093(97)00105-6 ↗
18. A.N. Alexandrou and G. Georgiou: J. Non-Newtonian Fluid Mech., 2007, vol. 142, pp. 199-206.10.1016/j.jnnfm.2006.09.003 ↗
19. A.N. Alexandrou, N. Constantinou and G. Georgiou: J. Non-Newtonian Fluid Mech., 2009, vol. 158, pp. 6-17.10.1016/j.jnnfm.2009.01.005 ↗
20. C.M. Gourlay and A.K. Dahle: Nature, 2007, vol. 445, pp. 70-73.10.1038/nature05426 ↗
21. T.Y. Liu: PhD Thesis, University of Sheffield, 2002.
22. C.J. Quaak: PhD Thesis, Technische Universiteit Delft, 1996, ISBN 90-5651-019-3.
23. P. Kumar, C.L. Martin, S. Brown: Metallurgical Transactions A, 1993, vol. 24A, pp. 1107-16.10.1007/BF02657241 ↗
24. T.Y. Liu, H.V. Atkinson, P.J. Ward and D.H. Kirkwood: Metallurgical and Materials Transactions A, 2003, vol. 34A, pp. 409-17.10.1007/s11661-003-0342-3 ↗
25. J. Koke and M. Modigell: Journal of Non-Newton. Fluid Mech., 2003, vol. 112, pp. 141-60.10.1016/S0377-0257(03)00080-6 ↗
26. H. Peng and K.K. Wang: in Proc. 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, D.H. Kirkwood and P. Kapranos, eds., Publ. University of Sheffield, Sheffield, UK, June 1996, pp. 2–9.
27. P. Kumar, C.L. Martin, and S. Brown: Acta Metall. Mater., 1994, vol. 42, pp. 3595–602 and 3603–14.10.1016/0956-7151(94)90426-X ↗
28. M. Modigell, J. Koke, and J. Petera: in Proc. 5th Int. Conf. on Semi-solid Processing of Alloys and Composites, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Publ. Colorado School of Mines, Golden, Colorado, USA, June 1998, pp. 317–326.
29. G.R. Burgos, A.N. Alexandrou and V. Entov: Journal of Materials Processing Technology, 2001, vol. 110, pp. 164-76.10.1016/S0924-0136(00)00731-7 ↗
30. H.V. Atkinson and P.J. Ward: JOM, 2006, vol. 8 , pp. 21-23.10.1007/s11837-006-0174-x ↗
31. P.A. Joly: PhD Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1974.
32. P. Kumar: PhD Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1994.
33. L.S. Turng and K.K. Wang: J Mater Sci., 1991, vol. 26, pp. 2173-83.10.1007/BF00549185 ↗
34. M. Modigell: AVT at RWTH Aachen University, Germany, and German University of Technology in Oman (GUTech), Private Communication, July 2011.
35. W. Jiang, S. Xuan, and X. Gong: Appl. Phys. Lett., 2015, vol. 106, Article number 151902.10.1063/1.4918344 ↗
36. J.L. Jorstad, A.N. Alexandrou and E. Mitsoulis: Semi-solid metal processing: ‘Unlimited’ flow velocity without turbulence in thin cast sections, Solid State Phenomena, 2015, Vols 217-218, pp. 159-165.