Effect of Al Addition on ω Precipitation and Age Hardening of Ti-Al-Mo-Fe Alloys
Source abstract
Abstract
The effect of Al addition on ω precipitation and age-hardening behavior of Ti-9.2Mo-2Fe and Ti-2Al-9.2Mo-2Fe alloy during aging treatment was investigated. The results showed that athermal and isothermal ω phase formation in Ti-2Al-9.2Mo-2Fe alloy was suppressed to a certain extent due to Al addition. In addition, a small amount of athermal ω phase was observed in the β matrix with a size of about ~5 nm during water quenching from above the β transus temperature for both alloys. Isothermal ω formation was also found during aging at temperatures ranging from 573 K to 773 K (300 °C to 500 °C) in both alloys, although it had a limited time of stability at 773 K (500 °C). The hardening due to isothermal ω precipitation exhibited no over-aging as long as ω phase existed in both alloys, and ω phase played a more important role in hardening than α phase. And the ω phase in 50 to 100 nm size exhibited the best hardening effect in Ti-9.2Mo-2Fe alloy. Similarly, α phase with 100 to 200 nm in length showed better hardening effects in Ti-2Al-9.2Mo-2Fe alloy. Both the alloys showed stronger age hardening at an intermediate temperature of 673 K (400 °C) and in the first aging stage at a higher temperature of 773 K (500 °C) due to the sufficiently fine size (50 nm), while they exhibited weaker age hardening at a lower temperature of 573 K (300 °C) and long period aging at a higher temperature of 773 K (500 °C) due to incomplete ω formation and/or coarsening of α phase. No over or peak aging stage was found at 573 K and 673 K (300 °C and 400 °C) during the aging for 72 hours, while the peak hardness values of both alloys aged at 773 K (500 °C) were obtained in the first stage of aging. The hardness of the alloys was very sensitive to size and volume fraction of ω phase, which depends on aging temperature, time, and composition of the involved alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. [1] G. Lütjering, J.C. Williams: Titanium, 2nd. ed., p. 283, Springer-Verlag, Berlin, Germany, 2007.
2. C. Leyens, M. Peters: Titanium and titanium alloys: fundamentals and applications. P.37, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 200310.1002/3527602119 ↗
3. [3] O.M. Ivasishin, P.E. Markovsky, S.L. Semiatin, C.H. Ward: Mater. Sci. Eng., A, 2005, vol. 405, pp. 296-305.10.1016/j.msea.2005.06.027 ↗
4. [4] S. Ankem, C.A. Green: Mater. Sci. Eng., A, 1999, vol. 263, pp. 127-131.10.1016/S0921-5093(98)01170-8 ↗
5. [5] O.M. Ivasishin, P.E. Markovsky, Y.V. Matviychuk, S.L. Semiatin, C.H. Ward, S. Fox: J. Alloys Comp., 2008, vol. 457, pp. 296-309.10.1016/j.jallcom.2007.03.070 ↗
6. B.S. Hickman: J. Mater. Sci., 1969vol. 4, pp. 554-563.10.1007/BF00550217 ↗
7. S. Banerjee, P. Mukhopadhyay: Phase transformations: examples from titanium and zirconium alloys. 1st ed., p. 49,Elsevier Ltd, 2007
8. [8] D. De Fontaine: Metall. Trans. A, 1988, vol. 19, pp. 169-175.10.1007/BF02652523 ↗
9. [9] T.S. Kuan, R.R. Ahrens, S.L. Sass: Metall. Trans. A, 1975, vol. 6, pp. 1767-1774.10.1007/BF02642306 ↗
10. [10] Y. Ohmori, T. Ogo, K. Nakai, S. Kobayashi: Mater. Sci. Eng., A, 2001, vol. 312, pp. 182-188.10.1016/S0921-5093(00)01891-8 ↗
11. [11] T.W. Duerig, G.T. Terlinde, J.C. Williams: Metall. Trans. A, 1980, vol. 11, pp. 1987-1998.10.1007/BF02655118 ↗
12. [12] F.H. Froes, C.F. Yolton, J.M. Capenos, M.G.H. Wells, J.C. Williams: Metall. Trans. A, 1980, vol. 11, pp. 21-31.10.1007/BF02657167 ↗
13. [13] M.C. Jon, H. Fujimura, R.J. De Angelis: Metallography, 1972, vol. 5, pp. 139-150.10.1016/0026-0800(72)90051-1 ↗
14. [14] H.J. Rack, David Kalish, K.D. Fike: Mater. Sci. Eng., 1970, vol. 6, pp. 181-198.10.1016/0025-5416(70)90048-0 ↗
15. [15] N.G. Jones, R.J. Dashwood, M. Jackson, D. Dye: Acta Mater., 2009, vol. 57, pp. 3830-3839.10.1016/j.actamat.2009.04.031 ↗
16. [16] S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper, H. L. Fraser: Acta Mater., 2009, vol. 57, pp. 2136-2147.10.1016/j.actamat.2009.01.007 ↗
17. [17] S. Azimzadeh, H. J. Rack: Metall. Trans. A, 1998, vol. 29, pp. 2455-2467.10.1007/s11661-998-0217-8 ↗
18. [18] A. Bhattacharjee, P. Ghosal, A.K. Gogia, S. Bhargava, S.V. Kamat: Mater. Sci. Eng., A, 2007, vol. 452-453, pp. 219-227.10.1016/j.msea.2006.10.166 ↗
19. [19] S. Hanada, O. Izumi: Metall. Trans. A, 1987, vol. 18, pp. 265-271.10.1007/BF02825707 ↗
20. [20] W.F. Cui, A.H. Guo: Mater. Sci. Eng., A, 2009, vol. 527, pp. 258-262.10.1016/j.msea.2009.08.057 ↗
21. [21] J.I. Qazi, B. Marquardt, L.F. Allard, H.J. Rack: Mater. Sci. Eng., C, vol. 25, 2005, pp. 389-397.10.1016/j.msec.2005.01.022 ↗
22. [22] M. Niinomi, T. Akahori, S. Katsura, K. Yamauchi, M. Ogawa: Mater. Sci. Eng., C, 2007, vol. 27, pp. 154-161.10.1016/j.msec.2006.04.008 ↗
23. [23] Y.L. Hao, S.J. Li, S.Y. Sun, C.Y. Zheng, R. Yang: Acta Biomater., 2007, vol. 3, pp. 277-286.10.1016/j.actbio.2006.11.002 ↗
24. [24] H.P. Ng, E. Douguet, C.J. Bettles, B.C. Muddle: Mater. Sci. Eng., A, 2010, vol. 527, pp. 7017-7026.10.1016/j.msea.2010.07.055 ↗
25. [25] H.P. Ng, A. Devaraj, S. Nag, C.J. Bettles, M. Gibson, H.L. Fraser, B.C. Muddle, R. Banerjee: Acta Mater., 2011, vol. 59, pp. 2981-2991.10.1016/j.actamat.2011.01.038 ↗
26. [26] X.H. Min, S. Emura, L. Zhang, K. Tsuzaki: Mater. Sci. Eng., A, 2008, vol. 497, pp. 74-78.10.1016/j.msea.2008.06.018 ↗
27. [27] X.H. Min, S. Emura, T. Nishimura, K. Tsuchiya, K. Tsuzaki: Mater. Sci. Eng., A, 2010, vol. 527, pp. 5499-5506.10.1016/j.msea.2010.06.016 ↗
28. [28] X.H. Min, S. Emura, N. Sekido, T. Nishimura, K. Tsuchiya, K. Tsuzaki: Mater. Sci. Eng., A, 2010, vol. 527, pp. 2693-2701.10.1016/j.msea.2009.12.050 ↗
29. S. Nag, R. Banerjee, J. Stechschulte, H.L. Fraser: J. Mater. Sci.: Materials in Medicine, 2005, vol. 16, pp. 679-685
30. [30] T. Gloriant, G. Texier, F. Sun, I. Thibon, F. Prima, J.L. Soubeyroux: Scripta Mater., 2008, vol. 58, pp. 271-274.10.1016/j.scriptamat.2007.10.007 ↗
31. [31] E.W. Collings: The physical metallurgy of titanium alloys, p.75, ASM, Metals Park, OH, USA, 1984.
32. [32] A.W. Bowen: Scripta. Metall., 1971, vol. 5, pp. 709-716.10.1016/0036-9748(71)90258-4 ↗
33. T.W. Duerig, G.T. Terlinde, J.C. Williams: in Proceedings of the 4th International Conference on Titanium Science and Technology, Kyoto, H. Kimura and O. Izumi, eds., Metallurgical Society of AIME, Warrendale, 1980, pp. 1299–1308.
34. [34] Y. Mantani, M. Tajima: Mater. Sci. Eng., A, 2006, vol. 438-440, pp. 315-319.10.1016/j.msea.2006.02.180 ↗
35. [35] B.S. Hickman: J. Inst. Met., 1968, vol. 96, pp. 330-337.
36. [36] C. Li, D-G. Lee, X. Mi, W. Ye, S. Hui, YT. Lee: J. Alloys Comp., 2013, vol. 549, pp. 152-157.10.1016/j.jallcom.2012.08.065 ↗
37. [37] J.C. Williams, B.S. Hickman, D.H. Leslie: Met. Trans., 1971, vol. 2, pp. 477-484.10.1007/BF02663337 ↗