Effect of Intercritical Thermomechanical Processing on Austenite Retention and Mechanical Properties in a Multiphase TRIP-Assisted Steel
Source abstract
Abstract
The effect of dynamic microstructural evolution on austenite retention was investigated in a transformation-induced plasticity-assisted multiphase steel by compressive deformation between 993 K and 1233 K (720 °C and 960 °C) covering the intercritical two-phase region. Based on optical microscopy and electron backscatter diffraction observations, extensive dynamic recovery of ferrite occurred below 1113 K (840 °C), i.e., lower part of two-phase region, due to strain concentration in the ferrite. Deformation-induced ferrite formation occurred at temperatures between 1113 K and 1153 K (840 °C to 880 °C), i.e., upper part of two-phase region, providing up to 27 pct additional fine ferrite grains compared to the undeformed state. Dynamic recrystallization of austenite took place at temperatures above 1173 K (900 °C), above Ac3. The dynamic restoration phenomena were found to have no positive influence on austenite retention; however, shear punch test results indicated that the specimens processed at 1113 K to 1153 K (840 °C to 880 °C) had a very good combination of strength and elongation, which was attributed to the synergic effects of the transformation of retained austenite and the fine ferrite structure generated through deformation-induced ferrite formation. X-ray diffraction analysis and scanning electron microscopy showed that deformation-induced ferrite might have rejected the excess carbon to the boundaries, thereby promoting the austenite formation in these regions. The present findings suggest that austenite can be dynamically stabilized as the result of deformation-induced ferrite formation. The effect is referred to as dynamic transformation-assisted austenite retention.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. X.D. Wang, B.X. Huang, Y.H. Rong and L. Wang: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 300-305.10.1016/j.msea.2006.02.149 ↗
2. R. Zhu, S. Li, I. Karaman, R. Arroyave, T. Niendorf and H.J. Maier: Acta Mater., 2012, vol. 60, pp. 3022-33.10.1016/j.actamat.2012.02.007 ↗
3. W.C. Jeong, D.K. Matlock and G. Krauss: Mater. Sci. Eng. A, 1993, vol. 165, pp. 1-8.10.1016/0921-5093(93)90620-T ↗
4. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright and S. van der Zwaag: Acta Mater., 2007, vol. 55, pp. 6713-23.10.1016/j.actamat.2007.08.040 ↗
5. E. De Moor, S. Lacroix, A.J. Clarke, J. Penning and J.G. Speer: Metall. Mater. Trans. A 2008, vol. 39A, pp. 2586-95.10.1007/s11661-008-9609-z ↗
6. I.B. Timokhina, P.D. Hodgson and E.V. Pereloma: Metall. Mater. Trans. A 2004, vol. 35A, pp. 2331-41.10.1007/s11661-006-0213-9 ↗
7. S.J. Lee, S. Lee and B.C. De Cooman: Scripta Mater., 2011, vol. 64, pp. 649-52.10.1016/j.scriptamat.2010.12.012 ↗
8. S. Kang, E. De Moor and J.G. Speer: Metall. Mater. Trans. A 2015, vol. 46A, pp. 1005-11.10.1007/s11661-014-2708-0 ↗
9. E.V. Pereloma, I.B. Timokhina, M.K. Miller and P.D. Hodgson: Acta Mater., 2007, vol. 55, pp. 2587-98.10.1016/j.actamat.2006.12.001 ↗
10. K.-I. Sugimoto, T. Iida, J. Sakaguchi and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902-908.10.2355/isijinternational.40.902 ↗
11. A. Kammouni, W. Saikaly, M. Dumont, C. Marteau, X. Bano and A. Charaï: Mater. Sci. Eng. A, 2009, vol. 518, pp. 89-96.10.1016/j.msea.2009.05.015 ↗
12. S. Zaefferer, J. Ohlert and W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765-78.10.1016/j.actamat.2004.02.044 ↗
13. J. Chiang, B. Lawrence, J.D. Boyd and A.K. Pilkey: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4516-21.10.1016/j.msea.2011.02.032 ↗
14. K.-I. Sugimoto, M. Misu, M. Kobayashi and H. Shirasawa: ISIJ Int., 1993, vol. 33, pp. 775-82.10.2355/isijinternational.33.775 ↗
15. F. Lani, Q. Furnémont, T. Van Rompaey, F. Delannay, P.J. Jacques and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 3695-705.10.1016/j.actamat.2007.02.015 ↗
16. I.B. Timokhina, P.D. Hodgson and E.V. Pereloma: Metall. Mater. Trans. A 2004, vol. 35A, pp 2331-41.10.1007/s11661-006-0213-9 ↗
17. S. Godet and P. Jacques: Mater. Sci. Eng. A, 2015, vol. 645, pp. 20-27.10.1016/j.msea.2015.07.082 ↗
18. Y. Shen, L. Qiu, X. Sun, L. Zuo, P. Liaw and D. Raabe: Mater. Sci. Eng. A, 2015, vol. 636, pp. 551-64.10.1016/j.msea.2015.04.030 ↗
19. A. Zarei-Hanzaki, P.D. Hodgson and S. Yue: Metall. Mater. Trans. A 1997, vol. 28A, pp. 2405-14.10.1007/s11661-997-0197-0 ↗
20. A. Basuki and E. Aernoudt: Scripta Mater., 1999, vol. 40, pp. 1003-08.10.1016/S1359-6462(98)00496-5 ↗
21. A. Basuki and E. Aernoudt: J. Mater. Process. Technol., 1999, vol. 89–90, pp. 37-43.10.1016/S0924-0136(99)00037-0 ↗
22. Z.Y. Tang, H. Ding, L.X. Du, H. Ding and X. Zhang: J. Iron Steel Res. Int., 2007, vol. 14, pp. 56-60.10.1016/S1006-706X(07)60028-4 ↗
23. I.B. Timokhina, P.D. Hodgson and E.V. Pereloma: Metall. Mater. Trans. A 2003, vol. 34A, pp. 1599-609.10.1007/s11661-003-0305-8 ↗
24. H.B. Ryu, J.G. Speer and J.P. Wise: Metall. Mater. Trans. A 2002, vol. 33A, pp. 2811-16.10.1007/s11661-002-0266-3 ↗
25. S. Hore, S.K. Das, S. Banerjee and S. Mukherjee: Acta Mater., 2013, vol. 61, pp. 7251-59.10.1016/j.actamat.2013.08.030 ↗
26. A. Mohamadizadeh, A. Zarei-Hanzaki, S. Heshmati-Manesh and A. Imandoust: Mater. Sci. Eng. A, 2014, vol. 607, pp. 621-29.10.1016/j.msea.2014.04.044 ↗
27. A. Mohamadizadeh, A. Zarei-Hanzaki, H.R. Abedi, S. Mehtonen and D. Porter: Mater. Charact., 2015, vol. 107, pp. 293-301.10.1016/j.matchar.2015.07.028 ↗
28. A.A. Gorni: Steel Forming and Heat-Treating Hand Book, Sao Vacente, 2011.
29. A. Zarei-Hanzaki, P.D. Hodgson and S. Yue: ISIJ Int., 1995, vol. 35, pp. 324-31.10.2355/isijinternational.35.324 ↗
30. R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch and K.L. Murty: Mater. Sci. Eng. A, 2005, vol. 395, pp. 307-14.10.1016/j.msea.2004.12.048 ↗
31. M. Eskandari, A. Zarei-Hanzaki and H.R. Abedi: Mater. Des., 2013, vol. 45, pp. 674-81.10.1016/j.matdes.2012.08.042 ↗
32. A.M. Jorge Jr, W. Regone and O. Balancin: J. Mater. Process. Technol., 2003, vol. 142, pp. 415-21.10.1016/S0924-0136(03)00620-4 ↗
33. A. Mohamadizadeh, A. Zarei-Hanzaki, and S. Mehtonen: ISIJ Int., 2015, vol. 55, pp. 2406–15.10.2355/isijinternational.ISIJINT-2015-213 ↗
34. Y. Weng: Ultra-Fine Grained Steels, Springer Publish, Beijing, 2009, pp. 19-21.10.1007/978-3-540-77230-9 ↗
35. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269-76.10.1016/j.cossms.2006.02.014 ↗
36. P.J. Hurley and P.D. Hodgson: Mater. Sci. Eng. A, 2001, vol. 302, pp. 206-14.10.1016/S0921-5093(00)01823-2 ↗
37. M.R. Hickson, P.J. Hurley, R.K. Gibbs, G.L. Kelly and P.D. Hodgson: Metall. Mater. Trans. A 2002, vol. 33A, pp. 1019-26.10.1007/s11661-002-0203-5 ↗
38. D.S. Leem, Y.D. Lee, J.H. Jun and C.S. Choi: Scripta Mater., 2001, vol. 45, pp. 767-72.10.1016/S1359-6462(01)01093-4 ↗
39. C. Garcia-Mateo, M. Peet, F.G. Caballero and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2004, vol. 20, pp. 814-18.10.1179/026708304225017355 ↗
40. J.B. Seol, D. Raabe, P.P. Choi, Y.R. Im and C.G. Park: Acta Mater., 2012, vol. 60, pp. 6183-99.10.1016/j.actamat.2012.07.064 ↗
41. M. Pozuelo, J.E. Wittig, J.A. Jiménez and G. Frommeyer: Metall. Mater. Trans. A 2009, vol. 40A, pp. 1826-34.10.1007/s11661-009-9863-8 ↗
42. S. Sangal, N. Goel and K. Tangri: Metall. Trans. A, 1985, vol. 16A, pp. 2023-29.10.1007/BF02662403 ↗
43. I. Tsukatani, S.I. Hashimoto and T. Inoue: ISIJ Int., 1991, vol. 31, pp. 992-1000.10.2355/isijinternational.31.992 ↗