The Effect of Strontium on the Strength of Layers of Double Oxide Film Defects
Source abstract
Abstract
The change in the strength of layers of oxide film (bifilm) defects when held in Al-0.05 and 0.1 wt pct melts was evaluated indirectly by comparing the porosity, average pore roundness, and pore number density results obtained from a reduced pressure test of the commercial purity and Sr-containing Al melts subjected to different holding and vibration regimes. Any changes in the composition of the pores were also studied using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The results showed that the Al2O3 layers of a newly formed oxide film defect, when held in Al-0.05 or 0.1 wt pct Sr melt, transformed gradually into an Sr-containing oxide. This transformation caused the strength of the oxide layers to increase and the rate of the expansion of its atmosphere and removal of the defect from the melt to decrease. This might influence the increase in the porosity of Sr-modified Al castings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J. Campbell: Complete Casting Handbook, Butterworth-Heinemann, London, 2011.
2. N.R. Green and J. Campbell: Materials Science and Engineering: A, 1993, vol. 173(1-2), pp. 261-266.10.1016/0921-5093(93)90226-5 ↗
3. C. Nyahumwa, N.R. Green, and J. Campbell: Metall Mater Trans A, 2001, vol. 32A, pp. 349-358.10.1007/s11661-001-0266-8 ↗
4. C. Nyahumwa, N.R. Green, and J.Campbell: AFS Trans, 1998, vol. 58, pp. 215-223.
5. R. Raiszadeh and W.D. Griffiths: Metall Mater Trans B, 2006, vol. 37(6), pp. 865-871.10.1007/BF02735007 ↗
6. H. Iwahori, K. Yonekura, Y. Yamamoto, and M. Nakamura: AFS Transactions, 1990, vol. 98, pp. 167-173.
7. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, Butterworth-Heinemann, Oxford, 1999.
8. M. Nateghian, R. Raiszadeh, and H. Doostmohammadi: Metall Mater Trans B, 2012, vol. 43, pp. 1540-1549.10.1007/s11663-012-9708-5 ↗
9. W. Kahl and E. Fromm: Met Trans, 1985, vol. 16B, pp. 47-51.10.1007/BF02657487 ↗
10. M. Syvertsen: Metallurgical and Materials Transactions B, 2006, vol. 37(3), pp. 495-504.10.1007/s11663-006-0033-8 ↗
11. ASTM B962-15, Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle, ASTM International, West Conshohocken, 2015.
12. A. Shafaei and R. Raiszadeh: Metall and Materi Trans B, 2014, vol. 45(6), pp. 2486-2494.10.1007/s11663-014-0135-7 ↗
13. A. Ahmadpour, R. Raiszadeh, and H. Doostmohammadi: Int J Cast Metals Res, 2014, vol. 27(4), pp. 221-229.10.1179/1743133613Y.0000000100 ↗
14. C.E. Ransley and H. Neufeld: J Inst Metals, 1948, vol. 74, pp. 599-620.
15. R.D. Pehlke and A.L. Bement: Transactions of the Metallurgical society, 1962, vol. 224, pp. 1237-1242.
16. R. Raiszadeh and W.D. Griffiths: Metall Mater Trans B, 2008, vol. 39(2), pp. 298-303.10.1007/s11663-008-9142-x ↗
17. X.F. Bian, Z.H. Zhang, and X.F. Liu: Effect of strontium modification on hydrogen content and porosity shape of Al-Si alloys, Materials Science Forum, 2000, Vol. 331-337, 361-366.10.4028/www.scientific.net/MSF.331-337.361 ↗
18. F.N. Bakhtiarani and R. Raiszadeh: Metall Mater Trans B, 2011, vol. 42(2), pp. 331-340.10.1007/s11663-011-9480-y ↗
19. J.R. Denton and J.A. Spittle: Materials Science and Technology, 1985, vol. 1(4), pp. 305-311.10.1179/mst.1985.1.4.305 ↗
20. D. Emadi and J.E. Gruzleski: Transactions of the American Foundrymen’s Society, 1994, vol. 102, pp. 307-312.