journal article·2015-03Open access

Microstructure and Mechanical Properties of Laves Phase-strengthened Fe-Cr-Zr Alloys

L. Tan, Y. Yang

Abstract

Laves phase-reinforced alloys have shown some preliminary promising performance at room temperatures. This work aims at evaluating mechanical properties of Laves phase-strengthened alloys at elevated temperatures. Three Fe-Cr-Zr alloys were designed to favor the formation of eutectic microstructures containing Laves and body-centered cubic phases with the aid of thermodynamic calculations. Microstructural characterization was carried out on the alloys in as-processed and aged states using optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The effect of thermal aging and alloy composition on microstructure has been discussed based on microstructural characterization results. Mechanical properties have been evaluated by means of Vickers microhardness measurements, tensile testing at temperatures up to 973.15 K (700.15 °C), and creep testing at 873.15 K (600.15 °C) and 260 MPa. Alloys close to the eutectic composition show significantly superior strength and creep resistance compared to P92. However, their low tensile ductility may limit their applications at relatively low temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. N. Baluc, R. Schaeublin, P. Spaetig, and M. Victoria, Nucl. Fus., 2004, vol. 44, pp. 56-61.10.1088/0029-5515/44/1/006 ↗
2. H. Mimura, M. Ohgami, H. Naoi, and T. Fujita: in Materials for Advanced Power Engineering, D. Coutsouradis, ed., Kluwer Academic Publishers, The Netherlands, 1994.
3. B. Raj and M. Vijayalakshmi: in Comprehensive Nuclear Materials, R.J.M. Konings, et al., ed., Elsevier, Amsterdam, 2012.
4. T. Allen and D. Crawford: Science and Technology of Nuclear Installations, 2007.10.1155/2007/97486 ↗
5. K. Maruyama, K. Sawada, and J.-I. Koike, ISIJ Int., 2001, vol. 41, pp. 641-653.10.2355/isijinternational.41.641 ↗
6. J.D. Livingston, Phys. Status Solidi A, 1992, vol. 131, pp. 415-23.10.1002/pssa.2211310215 ↗
7. [7] A. Wasilkowska, M. Bartsch, F. Stein, M. Palm, G. Sauthoff, and U. Messerschmidt, Mater. Sci. Eng., A, 2004, vol. A381, pp. 1-15.10.1016/j.msea.2004.04.039 ↗
8. [8] A. Wasilkowska, M. Bartsch, F. Stein, M. Palm, K. Sztwiertnia, G. Sauthoff, and U. Messerschmidt, Mater. Sci. Eng., A, 2004, vol. A380, pp. 9-19.10.1016/j.msea.2004.04.005 ↗
9. [9] Y. Liu, J.D. Livingston, and S.M. Allen, Metall. Trans. A, 1992, vol. 23A, pp. 3303-08.
10. [10] J.M. Park, S.W. Sohn, T.E. Kim, D.H. Kim, K.B. Kim, and W.T. Kim, Scripta Mater., 2007, vol. 57, pp. 1153-1156.10.1016/j.scriptamat.2007.08.004 ↗
11. [11] S. Scudino, P. Donnadieu, K.B. Surreddi, K. Nikolowski, M. Stoica, and J. Eckert, Intermetallics, 2009, vol. 17, pp. 532-539.10.1016/j.intermet.2009.01.007 ↗
12. [12] Y. Yang, L. Tan, H. Bei, and J.T. Busby, J. Nucl. Mater., 2013, vol. 441, pp. 190-202.10.1016/j.jnucmat.2013.05.061 ↗
13. [13] S. Kuranaka, T. Gamo, and Y. Morita, J. alloy. compd., 1997, vol. 253, pp. 268-271.10.1016/S0925-8388(96)03030-7 ↗
14. [14] J. Soubeyroux, M. Bououdina, D. Fruchart, and L. Pontonnier, J. Alloy Compd, 1995, vol. 219, pp. 48-54.10.1016/0925-8388(94)05019-8 ↗