Remarkable Improvement of Shape-Memory Effect in a Co-31Ni-3Si Alloy by Ausforming
Source abstract
Abstract
In order to improve the shape-memory effect (SME) in Co-Ni alloys, the influence of ausforming temperature on the SME, microstructures, and mechanical behavior in a Co-31Ni-3Si alloy was studied. The results show that the ausforming at 1073 K (800 °C) could remarkably improve the SME in Co-31Ni-3Si alloy. A large recovery strain of 2.3 pct was obtained after bent by 3.7 pct at 77 K (−196 °C). The increase of yield strength and the decrease of the critical stress for the stress-induced gamma to epsilon martensitc transformation are responsible for the remarkable improvement of SME. The results indirectly showed that the SME in Co-Ni alloys results from the stress-induced gamma to epsilon martensitic transformation, and their low yield strength account for their poor SME. It can be expected that the strengthening of matrix by other methods, such as solution, dispersion, and grain refinement hardening, will improve the SME of Co-Ni alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H.-C. Shin, S.-H. Lee, J.-H. Jun, and C.-S. Choi: Mater. Sci. Technol., 2002, vol. 18, pp. 429–32.10.1179/02670830225001651 ↗
2. Y. K. Lee, H. C. Shin, S. H. Lee, and C. S. Choi: Mater. Sci. Forum, 2002, vol. 394, pp. 459–62.10.4028/www.scientific.net/MSF.394-395.459 ↗
3. Y. Liu, W. M. Zhou, X. Qi, B. H. Jiang, W. H. Wang, J. L. Chen, G. H. Wu, J. C. Wang, C. D. Feng, and H. Q. Xie: Appl. Phys. Lett., 2001, vol. 78, pp. 3660-62.10.1063/1.1376148 ↗
4. W. M. Zhou, Y. Liu, B. H. Jiang, X. Qi, and Y. N. Liu: Appl. Phys. Lett., 2003, vol. 82, pp. 760-62.10.1063/1.1539907 ↗
5. W. M. Zhou, Y. Liu, B. Jiang, and X. Qi: Mater. Sci. Forum, 2005, vol. 394, pp. 2029–32.10.4028/www.scientific.net/MSF.475-479.2029 ↗
6. W. Zhou, Y. Liu, B. Jiang, and P. Zhou: Mater. Sci. Eng. A, 2006, vol. 438, pp. 468–71.10.1016/j.msea.2006.04.121 ↗
7. Y. Liu, G. Tan, S. Miyazaki, and B. Jiang: J. Phys. IV, 2003, vol. 112, pp. 1025–28.
8. Y. Liu, H. Yang, Y. Liu, B. Jiang, J. Ding, and R. Woodward: Acta Mater., 2005, vol. 53, pp. 3625–34.10.1016/j.actamat.2005.04.019 ↗
9. H. Yang and Y. Liu: Acta Mater., 2006, vol. 54, pp. 4895–904.10.1016/j.actamat.2006.06.047 ↗
10. Y. Liu, H. Yang, G. Tan, S. Miyazaki, B. Jiang, and Y. Liu: J. Alloys Compd., 2004, vol. 368, pp. 157–63.10.1016/j.jallcom.2003.07.015 ↗
11. J. Liu and J. G. Li: Scripta Mater., 2007, vol. 56, pp. 109–12.10.1016/j.scriptamat.2006.09.036 ↗
12. L. J. Rong, Y. Y. Li, and C. X. Shi: Scripta Mater., 1996, vol. 34, pp. 993–98.10.1016/1359-6462(95)00605-2 ↗
13. D. Wang, D. Liu, Z. Dong, W. Liu, and J. Chen: Mater. Sci. Eng., A, 2001, vol. 315, pp. 174–79.10.1016/S0921-5093(01)00959-5 ↗
14. Y. H. Wen, W. Zhang, N. Li, H. B. Peng, and L. R. Xiong: Acta Mater., 2007, vol. 55, pp. 6526–34.10.1016/j.actamat.2007.08.005 ↗
15. N. E. Stanford, K. Chen, D. P. Dunne, and X.-J. Jin: ISIJ Int., 2007, vol. 47, pp. 883–89.10.2355/isijinternational.47.883 ↗
16. Y. Tomota, Y. Morioka, and W. Nakagawara: Acta Mater., 1998, vol. 46, pp. 1419–26.10.1016/S1359-6454(97)00285-1 ↗
17. D. Bu, H. Peng, Y. Wen, and N. Li: Mater. Des., 2011, vol. 32, pp. 2969–73.10.1016/j.matdes.2011.01.032 ↗
18. M. Murakami, H. Otsuka, H.G. Suzuki, and S. Matsuda: Proceedings of the International Conference on Martensitic Transformations, ICOMAT-86, 1986, pp. 985–90.
19. Q. Yang, Q. Yu, H. Peng, and Y. Wen: Adv. Eng. Mater., 2013, vol. 15, pp. 697–703.10.1002/adem.201200358 ↗
20. A. Sato, E. Chishima, K. Soma, and T. Mori: Acta Metall., 1982, vol. 30, pp. 1177–83.10.1016/0001-6160(82)90011-6 ↗
21. Y. Tomota, M. Strum, and J. W. Morris: Metall. Trans. A, 1986, vol. 17, pp. 537–47.10.1007/BF02643961 ↗
22. Q. Liu, Z. Ma, and N. Gu: Metall. Mater. Trans. A, 1998, vol. 29, pp. 1579–83.10.1007/s11661-998-0081-6 ↗
23. M. Szpryngacz, M. Enokizono, and T. Todaka: J. Magn. Magn. Mater., 2003, vol. 254, pp. 410–12.10.1016/S0304-8853(02)00917-4 ↗
24. Y. Waseda, E. Matsubara, and K. Shinoda: X-Ray Diffraction Crystallography: Introduction, Examples and Solved Problems, Springer, New York, 2011.10.1007/978-3-642-16635-8 ↗
25. H. INAGAKI: Z. MetaIlkd., 1992, vol. 83, pp. 90–96.