Effect of Thermal Cycling on Creep Behavior of Powder-Metallurgy-Processed and Hot-Rolled Al and Al-SiC Particulate Composites
Source abstract
Abstract
The tensile creep behavior of powder metallurgy (P/M)–processed and hot-rolled commercially pure Al and Al-5 or Al-10 vol pct SiC particulate composites has been evaluated after subjecting to 0, 2, and 8 thermal cycles between 500 °C and 0 °C with rapid quenching. The images of microstructures obtained using scanning and transmission electron microscopy as well as changes in the electrical resistivity, Young’s modulus, and microhardness have been examined in the samples subjected to thermal cycling, in order to compare the effects of structural damage and strengthening by dislocation generation. The damage is caused by voids formed by vacancy coalescence, and is more severe in pure Al than in Al-SiCp composites, because the particle-matrix interfaces in the composites act as effective sinks for vacancies. Creep tests have shown that the application of 2 thermal cycles lowers the creep strain rates in both pure Al and Al-SiCp composites. However, the creep resistance of pure Al gets significantly deteriorated, unlike the mild deterioration in the Al-5 SiCp composite, while the time to rupture for the Al-10 SiCp composite is increased. The dislocation structure and subgrain sizes in the Al and in the matrices of the Al-SiCp composites in the as-rolled condition, after thermal cycling, and after creep tests, have been compared and related to the creep behavior. The dimple sizes of the crept fracture surfaces appear to be dependent on the void density, tertiary component of strain, and time to rupture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A. Yehia, E. Bahei, G.J. Dvorak, and J.F. Wu: Compos. Sci. Technol., 1992, vol. 43, pp. 207–19.10.1016/0266-3538(92)90091-G ↗
2. M. Taya, W.D. Armstrong, and M. Dunn: Mater. Sci. Eng., A., 1991, vol. 143, pp. 143–54.10.1016/0921-5093(91)90734-5 ↗
3. S.C. Tjong, K.F. Tam, and S.Q. Wu: Compos. Sci. Technol., 2003, vol. 63, pp. 89–97.10.1016/S0266-3538(02)00200-2 ↗
4. P.B. Hirsch, J. Silcox, R.K. Smallman, and K.H. Westmacott: Philos. Mag., 1958, vol. 3, pp. 897–908.10.1080/14786435808237028 ↗
5. N. Shiotani, H. Kimura, R.R. Hasiguti, and R. Maddin: Acta Metall., 1967, vol. 15, pp. 287–96.10.1016/0001-6160(67)90204-0 ↗
6. M. Hu, W.D. Fei, and C.K. Yao: Mater. Lett., 2002, vol. 56 (5), pp. 637–41.10.1016/S0167-577X(02)00568-2 ↗
7. T. Christman, A. Needleman, and S. Suresh: Acta Metall., 1989, vol. 37, pp. 3029–50.10.1016/0001-6160(89)90339-8 ↗
8. K.K. Chawla: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 37–43.10.1007/s11661-004-0106-8 ↗
9. Z. Trojanova, P. Luka, W. Riehemann, and B.L Mordike: Mater. Sci. Eng., 2002, vol. 324, pp. 122–26.10.1016/S0921-5093(01)01293-X ↗
10. W.D. Fei, M. Hu, and C.K. Yao: Mater. Sci. Eng., A., 2003, vol. 356, pp. 17–22.10.1016/S0921-5093(02)00827-4 ↗
11. J. Deng and T. Lee: Int. J. Mach. Tools Manuf., 2002, vol. 42, pp. 245–50.10.1016/S0890-6955(01)00109-2 ↗
12. F. Zhang, P. Sun, X. Li, and G. Zhang: Mater. Lett., 2001, vol. 49, pp. 69–74.10.1016/S0167-577X(00)00344-X ↗
13. S. Pal, V.V. Bhanuprasad, and R. Mitra: Mater. Sci. Eng., A., 2008, vol. A489, pp. 11–20.10.1016/j.msea.2007.11.061 ↗
14. M.Y. Wu and O.D. Sherby: Scripta Metall., 1984, vol. 18, pp. 773–76.10.1016/0036-9748(84)90392-2 ↗
15. R.S. Mishra, R.H. Lu, R.B. Grishaber, and A.K. Mukherjee: Scripta Mater., 1998, vol. 38 (12), pp. 1819–24.10.1016/S1359-6462(98)00117-1 ↗
16. D.H. Shin and S.W. Nan: Scripta Metall., 1982, vol. 16, pp. 313–15.10.1016/0036-9748(82)90359-3 ↗
17. M.K. Jain, V.V. Bhanuprasad, S.V. Kamat, A.B. Pandey, V.K. Varma, B.V.R. Bhat, and Y.R. Mahajan: Int. J. Powder Metall., 1993, vol. 29 (3), pp. 267–75.
18. “ASTM E 112–96e2 Standard Test Methods for Determining Average Grain Size,” Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 2003, pp. 1–26.
19. E.E. Underwood: in Quantitative Microscopy, R.T. DeHoff and F.H. Rhines, eds., McGraw-Hill Book Company, New York, NY, 1968, pp. 78–124.
20. “ASTM C 1259-08e1 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration,” Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 2001, section 15, pp. 1–18.
21. “ASTM E-8M-00 Standard Test Methods for Tension Testing of Metallic Materials,” Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 2000, pp. 1–22.
22. A.B. Pandey, R.S. Mishra, and Y.R. Mahajan: Scripta Metall. Mater., 1990, vol. 24, pp. 1565–70.10.1016/0956-716X(90)90433-H ↗
23. A.B. Pandey, R.S. Mishra, A.G. Paradkar, and Y.R. Mahajan: Acta Mater., 1997, vol. 45 (3), pp. 1297–1306.10.1016/S1359-6454(96)00225-X ↗
24. A.B. Pandey, R.S. Mishra, and Y.R. Mahajan: Acta Metall. Mater., 1992, vol. 40 (8), pp. 2045–52.10.1016/0956-7151(92)90190-P ↗
25. J. Weertman: Trans. ASM, 1968, vol. 61, pp. 681–94.
26. M.F. Ashby: Acta Metall., 1972, vol. 20, pp. 887–97.10.1016/0001-6160(72)90082-X ↗
27. K.-T. Park, E.J. Lavernia, and F.A. Mohamed: Acta Metall. Mater., 1990, vol. 38 (11), pp. 2149–59.10.1016/0956-7151(90)90082-R ↗
28. G. Thomas and R.H. Willens: Acta Metall., 1964, vol. 12, pp. 191–96.10.1016/0001-6160(64)90187-7 ↗
29. F. Seitz: Acta Metall., 1953, vol. 1, pp. 355–69.10.1016/0001-6160(53)90112-6 ↗
30. L. Siegel and R. Resnick: Acta Metall., 1955, vol. 3, pp. 605–06.10.1016/0001-6160(55)90121-8 ↗
31. J.B. Adams and W.G. Wolfer: Acta Metall. Mater., 1993, vol. 41 (9), pp. 2625–32.10.1016/0956-7151(93)90131-B ↗
32. S. Pal, R. Mitra, and V.V. Bhanuprasad: Mater. Sci. Eng., A, 2008, vol. 480, pp. 496–505.10.1016/j.msea.2007.07.072 ↗
33. J.M. Papazian: Metall. Mater. Trans. A, 1998, vol. 19A, pp. 2945–53.
34. M.P. Thomas and J.E. King: J. Mater. Sci., 1994, vol. 29, pp. 5272–78.10.1007/BF01171535 ↗
35. G.M. Janowski and B.J. Pletka: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3027–35.10.1007/BF02669659 ↗
36. K.-C. Cen and C.-G. Chao: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1035–43.
37. N. Shiotani, H. Kimura, R.R. Hasiguti, and R. Maddin: Acta Metall., 1967, vol. 15, pp. 287–96.10.1016/0001-6160(67)90204-0 ↗
38. E. Ruedl and E. Staroate: Mater. Res. Bull., 1966, vol.1, pp. 215–21.10.1016/0025-5408(66)90041-9 ↗
39. R.J. Arsenault and N. Shi: Mater. Sci. Eng., A, 1986, vol. 81, pp. 175–87.10.1016/0025-5416(86)90261-2 ↗
40. M. Ashby, H. Shercliff, and D. Cebon: Materials Engineering, Science, Processing and Design, Butterworth-Heinemann, Oxford, United Kingdom, 2007, pp. 311–43.
41. J. Lemaitre: A Course on Damage Mechanics, Springer-Verlag, Berlin, 1992.10.1007/978-3-662-02761-5 ↗
42. R.C. Fowlweiler and F.R. Brotzen: Acta Metall., 1959, vol. 7, pp. 716–21.10.1016/0001-6160(59)90177-4 ↗
43. K.K. Chawla and M. Metzer: J. Mater. Sci., 1972, vol. 7, pp. 34–39.10.1007/BF00549547 ↗
44. C.J. Tweed, N. Hansen, and B. Ralph: Metall. Trans. A, 1983, vol. 14A, pp. 2235–43.10.1007/BF02663297 ↗
45. S.S. Iyer and C.Y. Young: J. Appl. Phys., 1985, vol. 57 (10), pp. 4594–98.10.1063/1.335366 ↗
46. R.S. Mishra: Scripta Metall. Mater., 1992, vol. 26, pp. 309–13.10.1016/0956-716X(92)90192-H ↗
47. S.V. Raj and G.M. Pharr: Mater. Sci. Eng., 1986, vol. 81, pp. 217–37.10.1016/0025-5416(86)90265-X ↗
48. Y. Huang and T.G. Langdon: JOM, 2003, vol. 55 (1), pp. 15–20.10.1007/s11837-003-0187-7 ↗
49. R.S. Mishra, A.B. Pandey, K.S. Prasad, and A.K. Mukherjee: Scripta Metall. Mater., 1995, vol. 33 (3), pp. 479–84.10.1016/0956-716X(95)00215-H ↗
50. S.R. Nutt: in Interfaces in Metal Matrix Composites, A.K. Dhingra and S.G. Fishman, eds., TMS, Warrendale, PA, 1986, pp. 157–67.
51. R. Raj: Proc. Int. Cong. Intergranular and Interphase Boundaries in Materials, Marc Aucouturier, ed., Coll. De Physique, Paris, 1990, vol. 51, pp. C1-393–C1-401.10.1051/jphyscol:1990161 ↗