journal article·2014-08

In-Situ Observation of the Growth of Massive Ferrite in Very Low-Carbon Fe-Mn and Ni Alloys

J. Hamada, Masato Enomoto, T. Fujishiro, T. Akatsuka

Publisher page

Abstract

The growth of ferrite was observed in situ under confocal scanning laser microscope in Fe-Ni and Mn alloys containing less than 0.01 mass pct C. The advancements of α/γ boundary during cooling at 2 and 20 °C/s were measured in the paraequilibrium α single-phase region in Fe-2Ni and 2Mn alloys and near the paraequilibrium α/(α + γ) phase boundary in an Fe-5Ni alloy. The growth rates obtained from the boundary displacement vs time plots were almost constant and were considerably greater than those calculated under long-range carbon diffusion control, and thus, the ferrite growth is likely to have occurred in a massive manner, albeit a carbon spike may develop ahead of the boundary. The mobility of massive α/γ boundary was calculated to fall between those proposed by Hillert and Wits et al. irrespective of the assumption as to the formation of carbon spike in front of the boundary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. T.B. Massalski: Phase Transformations, Chap. 10, ASM, Metals Park, OH, 1970, pp. 433–85.
2. T. B. Massalski: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2277-83.10.1007/s11661-002-0351-7 ↗
3. C. Atkinson, H.B. Aaron, K.R. Kinsman and H.I. Aaronson: Metall. Trans., 1973, vol. 4, pp. 783-92.10.1007/BF02643088 ↗
4. K.R. Kinsman and H.I. Aaronson: Transformation and Hardenability in Steels, Climax Molybdenum Co., Ann Arbor, MI, 1967, pp.39-53.
5. G.P. Krielaart and J. Sietsma and S. van der Zwaag: Mater. Sci. Eng., 1997, vol. 237A, pp. 216-23.10.1016/S0921-5093(97)00365-1 ↗
6. J.R. Bradley, J.M. Rigsbee and H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 323-33.10.1007/BF02661647 ↗
7. J.J. Wits, T.A. Kop, T. van Leeuwen, J. Seitsma, and S. van der Zwaag: Mater. Sci. Eng. A, 2000, vol. 283, pp. 234–41.10.1016/S0921-5093(00)00735-8 ↗
8. S.I. Vooijs, Y. van Leeuwen, J. Sietsma and S.van der Zwaag (2000) Metal. Mater. Trans. A, vol. 31A, pp. 379-85.10.1007/s11661-000-0274-0 ↗
9. M. Hillert and L. Höglund: Scripta Mater., 2006, vol. 54, pp. 1259-63.10.1016/j.scriptamat.2005.12.023 ↗
10. H. Chikama, H. Shibata, T. Emi and M. Suzuki: Mater.Trans. JIM, 37(1996), pp.620-26.10.2320/matertrans1989.37.620 ↗
11. D. Phelan and R. Dippenaar: Metall. Mater. Trans. A, 2004, vol. 35A, pp.3701-06.10.1007/s11661-004-0276-4 ↗
12. T.B. Massalski, J.H. Perepezko and J. Jaklovsky: Mater. Sci. Eng., 1975, vol. 18, pp. 193-98.10.1016/0025-5416(75)90169-X ↗
13. A. Borgenstam and M. Hillert: Acta Mater., 2000, vol. 48, pp. 2765-75.10.1016/S1359-6454(00)00102-6 ↗
14. M. Hillert and J. Ågren: Scripta Mater., 2004, vol. 50, pp. 697-99.10.1016/j.scriptamat.2003.11.020 ↗
15. F.W. Jones and W.I. Pumphrey: JISI, 1949, vol. 163, pp. 121-31.
16. M. Hillert: Metall. Trans. A, 1984, vol. 18A, pp. 411–19.10.1007/BF02644964 ↗
17. W.D. Swanson and J.G. Parr: JISI, 1964, vol.202, pp.104-06.
18. G.R. Speich and M. Cohen: Trans. TMS-AIME, 1960, vol. 218, pp. 1050-59.
19. X.L. Wan, R. Wei, L. Cheng, M. Enomoto and Y. Adachi: J.Mater.Sci., 2013, vol. 48, pp. 4345-55.10.1007/s10853-013-7250-8 ↗
20. D.E. Coates: Metall. Trans., 1973, vol.4, pp.1077-86.10.1007/BF02645611 ↗
21. M. Hillert: Metall. Trans. A, 1975, vol. 6A, p. 5.10.1007/BF02673664 ↗
22. M. Enomoto, T. Sonoyama and H. Yada: Mater. Trans. JIM, 1998, vol. 39, pp. 189-95.10.2320/matertrans1989.39.189 ↗
23. G.P. Krielaart and S. van der Zwaag: Mater. Sci. Technol., 1998, vol.14, pp. 10-18.10.1179/mst.1998.14.1.10 ↗