journal article·2014-12Open access

Numerical Investigation of Influence of the Martensite Volume Fraction on DP Steels Fracture Behavior on the Basis of Digital Material Representation Model

Konrad Perzyński, Łukasz Madej, Jinfeng Wang, Roman Kuziak, Peter D. Hodgson

Abstract

Abstract Development of the methodology for creating reliable digital material representation (DMR) models of dual-phase steels and investigation of influence of the martensite volume fraction on fracture behavior under tensile load are the main goals of the paper. First, an approach based on image processing algorithms for creating a DMR is described. Then, obtained digital microstructures are used as input for the numerical model of deformation, which takes into account mechanisms of ductile fracture. Ferrite and martensite material model parameters are evaluated on the basis of micropillar compression tests. Finally, the model is used to investigate the impact of the martensite volume fraction on the DP steel behavior under plastic deformation. Results of calculations are presented and discussed in the paper.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. S. Hayami and T. Furukawa: Microalloying 75, London, 1975.
2. M. Calcagnotto, Y. Adachi, D. Ponge and D. Raabe 2011, Acta Materialia, 59, 658-670.10.1016/j.actamat.2010.10.002 ↗
3. S. Krajewski and J. Nowacki 2014, Archives of Civil and Mechanical Engineering, 2, 278-286.10.1016/j.acme.2013.10.002 ↗
4. I. Pushkareva, 2009, “Evolution microstructurale d’un acier Dual Phase. Oprimisation de la resistance a l’endommagement,” Ecole des Mines Nancy, Lorraine.
5. K. V. Sudhakar and E. S. Dwarakadasa, 2000, Bulletin of Materials Science, vol. 23, no. 3, pp. 193-199.10.1007/BF02719909 ↗
6. Y. J. Chao, J. D. Ward Jr. and R. G. Sands 2007, Materials and Design, 28, 551-557.10.1016/j.matdes.2005.08.009 ↗
7. S. K. Giri and D. Bhattacharjee, 2012, Journal of Materials Engineering and Performance, vol. 21, no. 6, pp. 988-994.10.1007/s11665-011-9992-2 ↗
8. A. Bag, K. K. Ray and E. S. Dwarakadasa 2001, Metallurgical and Materials Transactions A, 32, 2207-2217.10.1007/s11661-001-0196-5 ↗
9. G. Lacroix, T. Pardoen and P. J. Jacques, 2008, Acta Materialia, 56, 3900-3913.10.1016/j.actamat.2008.04.035 ↗
10. H. Murakawa, H. Serizawa, T. Tsujimoto and S. Tomiyam, 2009, Transactions of JWRI, 38, 71-78.
11. H. J. Kleemola and M. T. Pelkkikangas, 1977, Sheet Metal Industries, 63, 591-599.
12. T. B. Stoughton and J. W. Yoon, 2011, International Journal of Plasticity, 27, 440-459.10.1016/j.ijplas.2010.07.004 ↗
13. M. Luo and T. Wierzbicki, 2010, International Journal of Solids and Structures, 47, 3084-3102.10.1016/j.ijsolstr.2010.07.010 ↗
14. W. Wu-rong, H. Chang-wei, Z. Zhong-hua and W. Xi-chen, 2011, Materials and Design, 32, 3320-3327.10.1016/j.matdes.2011.02.021 ↗
15. X. Wu, H. Bahmanpour and K. Schmid, 2012, Journal of Materials Processing Technology, 212, 1209-1124.10.1016/j.jmatprotec.2012.01.006 ↗
16. L. Madej, Development of the modeling strategy for the strain localization simulation based on the Digital Material Representation, Kraków: AGH, 2012.
17. A. Ramazani, K. Mukherjee, H. Quade, U. Prahl and W. Bleck, 2013, Materials Science & Engineering A, 560, 129-139.10.1016/j.msea.2012.09.046 ↗
18. A. Ramazani, A. Schwedt, A. Aretz, U. Prahl and W. Bleck, 2013, Computational Materials Science, 75, 35-44.10.1016/j.commatsci.2013.04.001 ↗
19. V. Uthaisangsuk, U. Prahl and W. Bleck, 2008, Computational Materials Science, 43, 27-35.10.1016/j.commatsci.2007.07.035 ↗
20. V. Uthaisangsuk, U. Prahl and W. Bleck, 2011, Engineering Fracture Mechanics, 78, 469-486.10.1016/j.engfracmech.2010.08.017 ↗
21. K. Choi, W. Liu, X. Sun and M. Khaleel, 2009, Metallurgical and Materials Transactions A, vol. 40A, pp. 796 - 809.10.1007/s11661-009-9792-6 ↗
22. Z. Hashin, “Analysis of composite materials – a survey,” Journal of Applied Mechanics, no. 50, pp. 481-505, 1983.10.1115/1.3167081 ↗
23. M. Ambrozinski, K. Bzowski, L. Rauch and M. Pietrzyk: Arch. Civ. Mech. Eng., vol. 12(2), 2012 pp. 126–132.10.1016/j.acme.2012.04.011 ↗
24. D. Brands, J. Schröder and D. Balzani: 19th International Conference on Computer Methods in Mechanics, Warsaw, 2011.
25. D. Balzani, J. Schröder and D. Brands: IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials, 2010, vol. 21, pp. 15–28.10.1007/978-90-481-9195-6_2 ↗
26. Ł. Rauch, M. Pernach, K. Bzowski and M. Pietrzyk, 2011, Computer Methods in Material Science, vol. 11, pp. 331-341.
27. M. Miller, J.-S. Park, P. Dawson and T.-S. Han, 2008, Acta Materialia, 56, 3927-3939.10.1016/j.actamat.2008.04.062 ↗
28. D. Ivanov, S. Ivanov, S. Lomov and I. Verpoest, 2009, vol. 47, pp. 360 - 370.10.1016/j.optlaseng.2008.05.013 ↗
29. M. Bernacki, Y. Chastel, H. Digonnet, H. Resk, T. Coupez and R. Logé, 2007, Computer Methods in Material Science, vol. 7, pp. 142-149.
30. C.F. Cornwell, R.W. Noack, and E.J. Abed: Three-dimensional Digital Microstructures, Project Report Documentation Prepared by High Performance Technologies, Inc Aberdeen Proving Ground, MD, 2006. Available: http://handle.dtic.mi1/100.2/ADA481869. Accessed March 14, 2014.
31. R. Logé, M. Bernacki, H. Resk, L. Delannay, H. Digonnet, Y. Chastel and T. Coupez, 2008, Philosophical Magazine, 88, 3691-3712.10.1080/14786430802502575 ↗
32. L. Madej, 2010, Computer Methods in Materials Science, vol. 10, pp. 1-13.
33. D. Raabe and R. Becker, 2010, Modelling and Simulation in Materials Science and Engineering, 8, 445-462.10.1088/0965-0393/8/4/304 ↗
34. R. Logé, H. Resk, Z. Sun, L. Delannay and M. Bernacki, 2010, Steel Research International, 81, 1420-1425.
35. L. Rauch and L. Madej, 2010, International Journal for Multiscale Computational Engineering, vol. 8, no. 3, pp. 343-356.10.1615/IntJMultCompEng.v8.i3.90 ↗
36. R. S. Sidhu and N. Chawla, 2004, Materials Characterization, 2, 225-230.10.1016/j.matchar.2004.04.010 ↗
37. J. Spowart, H. Mullens and B. Puchala, 2010, JOM, 55, 35-37, 2010.10.1007/s11837-003-0173-0 ↗
38. J. Spowart, 2006, Scripta Materialia, 55, 5-10.10.1016/j.scriptamat.2006.01.019 ↗
39. H. Poulsen: Ph.D. Thesis, Roskilde, Risø National Laboratory, 2004.
40. J. Cao, W. Zhuang, S. Wang and J. Lin, 2010, The International Journal of Advanced Manufacturing Technology, 47, 981-991.10.1007/s00170-009-2135-3 ↗
41. M. Ostoja-Starzewski, 2005, International journal of plasticity, vol. 21, no. 6, pp. 1119-1160.10.1016/j.ijplas.2004.06.008 ↗
42. The GIMP Documentation, GIMP, 2013. [Online]. Available: http://docs.gimp.org/. Accessed August 14, 2013.
43. L. Sieradzki and L. Madej, 2013, Computational Materials Science, 67, 156–173, 2013.10.1016/j.commatsci.2012.08.047 ↗
44. J. Szyndler and L. Madej: Arch. Civ. Mech. Eng., 2013, in press.
45. L. Madej, 2012, Computer Methods in Materials Science, vol. 12, no. 3, pp. 197-206.
46. L. Madej, F. Kruzel, P. Cybułka, K. Perzynski and K. Banas, 2012, Computer Methods in Materials Science, vol. 12, no. 2, pp. 85-96.
47. M.D. Uchic, D.M. Dimiduk, J.N. Florando and W.D. Nix: Science, 2004, vol. 305(5686), pp. 986–989.10.1126/science.1098993 ↗
48. J. Greer, W. Oliver and W. Nix: Acta Materialia, (2005) vol. 53, pp. 1821–1830.10.1016/j.actamat.2004.12.031 ↗
49. J. R. Greer and J. De Hosso, 2011, Progress in Materials Science, 56, 654-724.10.1016/j.pmatsci.2011.01.005 ↗
50. K. Perzyński and L. Madej, 2013, Archives of Metallurgy and Materials, vol. 58, no. 1, p. 211–215.10.2478/v10172-012-0175-4 ↗
51. N. Vajragupta, V. Uthaisangsuk, B. Schmaling, S. Münstermann, A. Hartmaier and W. Bleck, 2012, Computational Materials Science, 54, 271-279.10.1016/j.commatsci.2011.10.035 ↗