Interfacial Reactions, Microstructure, and Strength of Sn-8Zn-3Bi and Sn-9Zn-Al Solder on Cu and Au/Ni (P) Pads
Source abstract
Abstract
The Sn-8Zn-3Bi and Sn-9Zn-Al Pb-free solders were used to mount passive components onto printed circuit boards (PCBs) with electroless Ni immersed Au (ENIG) finishing layers using a reflow soldering process. The component mounted boards were aged at 150 °C for 200 to 1100 hours. The interfacial reactions and microstructure of the interfaces between the solders and the pads were observed using scanning electron microscopy and energy-dispersive spectrometry (EDS). Both solder joints on the two pads had similar interfacial microstructures; i.e., a very thin γ 2-AuZn3 layer was formed at the interface of the solder and Ni-P layer. The γ 2-AuZn3 layer transformed to an e-AuZn8 intermetallic compounds (IMC) with a consistent thickness during aging. Zinc atoms redeposited onto the IMC layer increased with increasing aging time. After aging at 150 °C for various times, the shear strengths of the ENIG and organic solderability preservative (OSP) joints were evaluated. The shear strength of the Sn-8Zn-3Bi solder joint was better than that of the Sn-9Zn-Al solder joint. All of the solder joints deteriorated after aging; however, the degradations of the OSP solder joints were more evident than those of the ENIG solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. J.W. Yoon and S.B. Jung: J. Alloys Compd., 2006, vol. 407, pp. 141–49.10.1016/j.jallcom.2005.06.047 ↗
2. F. Guo, S. Choi, J.P. Lucas, and K.N. Subramanian: J. Electron. Mater., 2000, vol. 29, pp. 1241–48.10.1007/s11664-000-0019-2 ↗
3. M. McCormack, S. Jin, G.W. Kammlott, and H.S. Chen: Appl. Phys. Lett., 1993, vol. 63, pp. 15–17.10.1063/1.109734 ↗
4. S.W. Kim, J.W. Yoon, and S.B. Jung: J. Electron. Mater., 2004, vol. 33, pp. 1182–89.10.1007/s11664-004-0121-y ↗
5. P.C. Shih and K.L. Lin: J. Alloys Compd., 2006, vol. 422, pp. 153–63.10.1016/j.jallcom.2005.11.081 ↗
6. K.I. Chen, S.C. Cheng, S. Wu, and K.L. Lin: J. Alloys Compd., 2006, vol. 416, pp. 98–105.10.1016/j.jallcom.2005.08.034 ↗
7. Y.S. Kim, K.S. Kim, C.W. Hwang, and K. Suganuma: J. Alloys Compd., 2003, vol. 352, pp. 237–45.10.1016/S0925-8388(02)01168-4 ↗
8. K.S. Kim, J.M. Yang, C.H. Yu, I.O. Jung, and H.H. Kim: J. Alloys Compd., 2004, vol. 379, pp. 314–18.10.1016/j.jallcom.2004.03.138 ↗
9. Y.C. Liu, W.H. Lin, H.J. Lin, and T.H. Chuang: J. Electron. Mater., 2006, vol. 35, pp. 147–53.10.1007/s11664-006-0197-7 ↗
10. K.L. Lin, L.H. Wen, and T.P. Liu: J. Electron. Mater., 1998, vol. 27, pp. 97–105.10.1007/s11664-998-0197-x ↗
11. K.L. Lin and Y.C. Wang: J. Electron. Mater., 1998, vol. 27, pp. 1205–10.10.1007/s11664-998-0070-y ↗
12. C.W. Huang and K.L. Lin: J. Mater. Res., 2004, vol. 19, pp. 3560–68.10.1557/JMR.2004.0458 ↗
13. S.C. Chang, S.C. Lin, and K.C. Hsieh: J. Electron. Mater., 2006, vol. 35, pp. 399–405.10.1007/BF02690525 ↗
14. K. Zeng and K.N. Tu: Mater. Sci. Eng., 2002, vol. R38, pp. 55–105.10.1016/S0927-796X(02)00007-4 ↗
15. K.M. Kumar, V. Kripesh, L. Shen, K. Zeng, and A.A.O. Tay: Mater. Sci. Eng., 2006, vol. A423, pp. 57–63.10.1016/j.msea.2006.01.088 ↗
16. M. Date and K.N. Tu: J. Mater. Res., 2004, vol. 19, pp. 2887–96.10.1557/JMR.2004.0371 ↗
17. A. Bansal, S. Yoon, and V. Mahadev: SMTA Pan Pacific Microelectron. Symp., Kauai, Hawaii, SMTA, Edina, MN, 2005, pp. 1–8.
18. R. Prasad: SMT Mag., 2001, vol. 15 (5), p. 87.
19. R.J.K. Wassink: Soldering in Electronics, 2nd ed., Electrochemical Publications Ltd., GB-Port Erin, British Isles, 1989, 302 pp.
20. S.C. Chang, S.C. Lin, and K.C. Hsieh: J. Alloys Compd., 2007, vol. 428, pp. 179–84.10.1016/j.jallcom.2006.01.106 ↗
21. J.W. Yoon and S.B. Jung: J. Mater. Res., 2006, vol. 21, pp. 1590–99.10.1557/jmr.2006.0198 ↗
22. M. Date, K.N. Tu, T. Shoji, M. Fujiyoshi, and K. Sato: Scripta Mater., 2004, vol. 51, pp. 641–45.10.1016/j.scriptamat.2004.06.027 ↗
23. C.T. Lin, C.S. Hsi, M.C. Wang, T.C. Chang, and M.K. Liang: J. Alloys Compd., 2008, vol. 459, pp. 225–31.10.1016/j.jallcom.2007.05.029 ↗
24. H.S. Liu, K. Ishida, Z.P. Jin and Y. Du: Intermetallics, 2003, vol. 11, pp. 987–94.10.1016/S0966-9795(03)00115-8 ↗
25. W.K. Liou and Y.W. Yen: Intermetallics, 2009, vol. 17, pp. 72–78.10.1016/j.intermet.2008.10.001 ↗
26. R. Hultgren, P.D. Desai, D.T. Hawkins, M. Gleiser, and K.K. Kelley: Selected Values of the Thermodynamic Properties of Binary Alloys, ASM, Metals Park, OH, 1973, pp. 810–20.
27. R. Hultgren, P.D. Desai, D.T. Hawkins, M. Gleiser, and K.K. Kelley: Selected Values of the Thermodynamic Properties of Binary Alloys, ASM, Metals Park, OH, 1973, pp. 332–38.
28. R. Hultgren, P.D. Desai, D.T. Hawkins, M. Gleiser, and K.K. Kelley: Selected Values of the Thermodynamic Properties of Binary Alloys, ASM, Metals Park, OH, 1973, pp. 115–20.
29. Z. Mei, A.J. Sunwoo, and J.W. Morris, Jr.: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 857–64.10.1007/BF02675563 ↗
30. M. Nishiura, A. Nakayama, S. Sakatani, Y. Kohara, K. Uenishi, and K.F. Kobayash: Mater. Trans., 2002, vol. 43, pp. 1802–07.10.2320/matertrans.43.1802 ↗
31. Y. Chonan, T. Komiyama, J. Onuki, R. Urao, T. Kimura, and T. Nagano: Mater. Trans., 2000, vol. 43, pp. 1887–90.10.2320/matertrans.43.1887 ↗
32. K. Suganuma and K. Niihara: J. Mater. Res., 1998, vol. 13, pp. 2859–65.10.1557/JMR.1998.0391 ↗
33. J.H.L. Pang, T.I. Tan, and S.K. Sitaraman: IEEE 48th Electronic Components and Technology Conf., Seattle, WA, 1998, pp. 878–83.
34. J.H. Lau, D.W. Rice, and C.G. Harkins: IEEE Trans. Components, Hybrids Manuf. Technol., 1990, vol. 13, pp. 182–87.10.1109/33.52868 ↗
35. R.A. Islam, B.Y. Wu, M.O. Alam, Y.C. Chan, and W. Jillek: J. Alloys Compd., 2005, vol. 392, pp. 149–58.10.1016/j.jallcom.2004.08.079 ↗