journal article·2011-02

Effect of Crack-Tip Stresses on Stress Corrosion Cracking Behavior

D. Kujawski, K. Sadananda

Publisher page

Abstract

It is well documented that the applied load for a given material/environment system has a significant effect on the stress corrosion cracking (SCC) behavior in terms of K ISCC values as well as on the K-da/dt relation. Traditionally, the role of crack-tip stress has not received proper attention but rather the crack-tip strain that is supposedly critical in cracking the passive oxide exposing the fresh metal surface at the crack tip to the environment. This article discusses a different point of view pertinent to crack-tip stress calculations and their role on SCC behavior. We have examined different continuum mechanics solutions with respect to the role of blunting on crack-tip stress. Both solutions where free traction boundary conditions are satisfied on a sharp and blunt crack are analyzed and discussed. It was shown that the stress component perpendicular to the crack plane at the crack tip for the plateau region remains essentially the same due to blunting even with the increase in applied load. Constant crack-tip stress would also result in rather constant crack-tip strain or creep rate, and as such, the crack growth rate remains the same or constant with respect to applied stress. Presented stress analysis is based on available solutions taken from the literature and assumes that a chemical potential at the crack tip is fixed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, UK, 1998, pp. 570–85.
2. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, 3rd ed., CRC Taylor & Francis, Boca Raton, FL, 2005, pp. 511–52.
3. B. Lawn: Fracture of Brittle Solids, Cambridge University Press, Cambridge, UK, 1993, pp. 143–93.10.1017/CBO9780511623127 ↗
4. S.M. Wiederhorn, S.W. Freiman, E.R. Fuller, and C.J. Simmons: J. Mater. Sci., 1982, vol. 17, pp. 3460–78.10.1007/BF00752191 ↗
5. V.T. Stepurenko, P.T. Proskuryakov, M.G. Sakharov, and V.N. Oleinik: Zashch. Met., 1975, No. 2, pp. 155–58.
6. M.O. Speidel: Metall. Trans. A, 1975, vol. 6A, pp. 631–51.10.1007/BF02672284 ↗
7. P.S. Pao and R.P. Wei: Scripta Metall., 1977, vol. 11, pp. 515–20.10.1016/0036-9748(77)90170-3 ↗
8. W.G. Clark, Jr.: J. Mater. Energy Systems, 1979, vol. 1, pp. 33–40.10.1007/BF02833988 ↗
9. J.H. Huang and C.J. Altstetter: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 845–49.10.1007/BF02649081 ↗
10. R.P. Gangloff: in Comprehensive Structural Integrity, I. Milney, R.O. Ritchie, and B. Karihaloo, eds., Elsevier, New York, NY, 2003, pp. 31–101.10.1016/B0-08-043749-4/06134-6 ↗
11. S.P. Lynch: in Hydrogen Effects in Materials Behavior and Corrosion Interaction Deformations, N.R. Moody, A.W. Thompson, R. Ricker, G. Was, and R. Jones, eds., TMS, Warrendale, PA, 2003, pp. 449–86.
12. D. Kujawski and A.K. Vasudevan: Metall. Mater. Trans. A, in press.
13. S. Sadananda and A.K. Vasudevan: Metall. Mater. Trans. A, in press.
14. W.W. Gerbrich and S. Chen: in Environment Induced Cracking of Metals, R.P. Gangloff and H.B. Ives, eds., NACE, Houston, TX, 1990, pp. 167–86.
15. M.M. Hall and D.M. Symonds: Int. Conf. on Hydrogen Effects on Material Behavior and Corrosion Deformation Interaction, N.R. Moody, A.W. Thompson, R.E. Ricker, G.W. Was, and R.H. Jones, eds., TMS, Warrendale, PA, 2002, pp. 811–22.
16. M.M. Hall: in Environment-Induced Cracking of Materials, S.A. Shipilov, R.H. Jones, J.-M. Oliver, and R.B. Rebak, eds., Elsevier, New York, NY, 2008, pp. 59–68.
17. B. Joseph, M. Picat, and F. Barbier: Eur. Phys. J. Appl. Phys., 1999, vol. 5, pp. 19–31.10.1051/epjap:1999108 ↗
18. E. Lupton, C. Brauchle, and I. Frank: NIC Symp. 2006, John von Neuman Institute for Computing, Julich, 2006, NIC Series, vol. 32, pp. 57–64.
19. T.A. Michalske and S.W. Freiman: Nature, 1982, vol. 295, pp. 511–12.10.1038/295511a0 ↗
20. J. Rimoli: Ph.D. Thesis, California Institute of Technology, Pasadena, CA, 2009.
21. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, pp. 13–31.10.1016/0022-5096(68)90014-8 ↗
22. J.R. Rice and G.R. Resengren: J. Mech. Phys. Solids, 1968, vol. 16, pp. 1–12.10.1016/0022-5096(68)90013-6 ↗
23. J.R. Rice and M.A. Johnson: in Inelastic Behavior of Solids, M.F. Kanninen, W.F. Adler, A.R. Rosenfield, and R.I. Jaffee, eds., McGraw-Hill, New York, NY, 1970, p. 641.
24. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
25. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19, pp. 317–29.10.1016/0013-7944(84)90026-2 ↗
26. R.M. McMeeking and D.M. Parks: On Criteria for J-Dominance of Crack Tip Fields in Large-Scale Yielding, ASTM STP 668, ASTM, Philadelphia, PA, 1979, pp. 175–94.
27. M.N.K. Singh, R.N. Dubey, and G. Glinka: Eng. Fract. Mech., 1994, vol. 135, pp. 479–92.10.1016/0013-7944(94)90249-6 ↗
28. A.K. Sahoo, R.N. Dubey, and M.D. Pandey: “Crack Induced Stress and Deformation Field,” Transaction, SMiRT 19, Toronto, Aug. 2007, paper no. B02/2.
29. M. Creager and P.C. Paris: Int. J. Fract., 1967, vol. 3 (4), pp. 247–52.10.1007/BF00182890 ↗
30. H. Neuber: J. Appl. Mech., 1961, vol. 28, pp. 544–50.10.1115/1.3641780 ↗
31. N.E. Dowling: Mechanical Behavior of Materials, 3rd ed., Prentice Hall, Upper Saddle River, NJ, 1999.
32. F. Bovard: ALCOA, Alcoa Center, PA, private communication, 2009.
33. M.O. Speidel and M.V. Hyatt: in Advances in Corrosion Science & Technology, M.G. Fontana and R.W. Staehle, eds., Plenum Press, New York, NY, 1972, vol. 2, pp. 115–335.10.1007/978-1-4615-8255-7_3 ↗
34. M.O. Speidel: “Subcritical Crack Growth in Zr Alloys,” presented at ASTM Committee E-24-Sub IV, Los Angeles, CA, 1971.