Electrochemical Studies on Silicate and Bicarbonate Ions for Corrosion Inhibitors
Source abstract
Abstract
Several types of carbon and high-strength low-alloy (HSLA) steels are being considered for use in the underground reinforcement of the Yucca Mountain Nuclear Waste Repository. In this study, potentiodynamic polarization under reducing conditions was used to determine the corrosion rates (CRs) and passivity behavior of AISI 4340 steel using different combinations of sodium silicate (Na2SiO3) and sodium bicarbonate (NaHCO3), in both pure water (PW) and simulated seawater (SW, 3.5 pct NaCl). These experiments were carried out to examine the potential inhibiting properties of the silicate or bicarbonate ions on the surface of the steel. The addition of sodium silicate to solution reduced the observed CR at room temperature to 19 μm/y at 0.005 M concentration and 7 μm/y at 0.025 M concentration in PW. The addition of sodium bicarbonate increased the CR from 84 μm/y (C = 0.1 M) to 455 μm/y (C = 1 M). These same behaviors were also observed at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Metals Handbook Desk Edition, 2nd ed., J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 2006.
2. OCRWM, U.S.D.O.E. [cited; available from: http://www.ocrwm.doe.gov/ym_repository/index.shtml]
3. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19 (2), pp. 317–29.10.1016/0013-7944(84)90026-2 ↗
4. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19 (6), pp. 1057–67.10.1016/0013-7944(84)90151-6 ↗
5. Y. Hirose and T. Mura: Mech. Mater., 1984, vol. 3, pp. 95–110.10.1016/0167-6636(84)90001-2 ↗
6. Y. Hirose and T. Mura: Eng. Fract. Mech., 1985, vol. 22 (5), pp. 859–70.10.1016/0013-7944(85)90114-6 ↗
7. Y. Hirose and T. Mura: Eng. Fract. Mech., 1989, vol. 34 (3), pp. 729–42.10.1016/0013-7944(89)90134-3 ↗
8. E.M.K. Hillier and M.J. Robinson: Corros. Sci., 2004, vol. 46, pp. 715–27.10.1016/S0010-938X(03)00180-X ↗
9. E.M.K. Hillier and M.J. Robinson: Corros. Sci., 2006, vol. 48, pp. 1019–35.10.1016/j.corsci.2005.05.009 ↗
10. D.A. Berman: Mater. Perform., 1985, vol. 24 (11), pp. 36–41.
11. S.M. Toy: J. Mater. Sci., 1999, vol. 34 (1), pp. 181–89.10.1023/A:1004419119600 ↗
12. S.J. Ketcham: “Chemical Milling of Alloy Steels,” USGRD Report, Naval Air Engineering Center, report number NAEC-AML-2418, 1966, pp. 80–81.
13. S.J. Ketcham and D.A. Berman: in Rapports Techniques—Centre Belge d’Etude de la Corrosion, M. Pourbaix, ed., CEBELCOR Brussels, Belgium, 1970, pp. 171–76.
14. S.J. Ketcham and J.J.D. Luccia: AGARD Conf. Proc., Pergamon Press, New York, NY, 1981.
15. J.R. Myers and R.K. Saxer: Corrosion, 1966, vol. 22 (12), pp. 346–48.10.5006/0010-9312-22.12.346 ↗
16. F. Mansfeld, M.W. Kendig, and W.J. Lorenz: J. Electrochem. Soc., 1985, vol. 132 (2), pp. 290–96.10.1149/1.2113820 ↗
17. V. Deodeshmukh: Chemical and Metallurgical Engineering, University of Nevada, Reno, NV, 2002.
18. V. Deodeshmukh, V. Arjunan, D. Chandra, A. Yilmaz, J. Daemen, D.A. Jones, S. Lea, and M. Engelhard: Corros. Sci., 2004, vol. 46, pp. 2629–49.10.1016/j.corsci.2004.03.007 ↗
19. Certificate of Tests–Republic Engineered Products, Massillon, OH, 2005.
20. Certified Test Report No. Unr001-05-10-28382-1, Laboratory Testing Inc., Hatfield, PA, 2005.
21. J.L. Dossett and H.E. Boyer: Practical Heat Treating, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 2006.10.31399/asm.tb.pht2.9781627082624 ↗
22. “Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements,” ASTM G 5-94, ASTM International, West Conshohocken, PA, 2004.
23. “Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements,” ASTM G 59-97, ASTM, West Conshohocken, PA, 2003.
24. “Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements,” ASTM G 102-89, ASTM, West Conshohocken, PA, 2004.
25. F. Mansfeld: in Advances in Corrosion Science and Technology, M.G. Fontana and R.W. Staehle, eds., Plenum Press, New York, NY, 1976.
26. “Standard Practice for Laboratory Immersion Corrosion Testing of Metals,” G 31-72, ASTM, West Conshohocken, PA, 2004.
27. K. Aramaki: Corros. Sci., 2001, vol. 43 (10), pp. 1985–2000.10.1016/S0010-938X(00)00174-8 ↗
28. I.N. Putilova, S.A. Balezin, and V.P. Barannik: Metallic Corrosion Inhibitors, Pergamon Press, New York, NY, 1960.
29. L. Lehrman and H.L. Shuldener: J. Ind. Eng. Chem., 1952, vol. 44 (8), pp. 1765–69.10.1021/ie50512a023 ↗
30. H.D. Leçe, K.C. Emregül, and O. Atakol: Corros. Sci., 2008, vol. 50 (5), pp. 1460–68.10.1016/j.corsci.2008.01.014 ↗
31. J. Dong, T. Nishimura, and T. Kodama: Materials Research Society Symposium, Materials Research Society, Pittsburgh, PA, 2001, vol. 713, pp. JJ11.8-1–JJ11.8-9.
32. D.H. Davies and G.T. Burstein: Corrosion, 1980, vol. 36 (8), pp. 416–22.10.5006/0010-9312-36.8.416 ↗
33. D.A. Jones: Principles and Prevention of Corrosion, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 1996, pp. 118–19.
34. N. Fujita, C. Matsuura, and K. Ishigure: Corrosion, 1989, vol. 45 (11), pp. 901–08.10.5006/1.3584999 ↗
35. G.I. Ogundele and W.E. White: Corrosion, 1986, vol. 42 (2), pp. 71–78.10.5006/1.3584888 ↗
36. Y.F. Cheng, M. Wilmott, and J.L. Luo: Appl. Surf. Sci., 1999, vol. 152, pp. 161–68.10.1016/S0169-4332(99)00328-1 ↗
37. Y.F. Cheng and J.L. Luo: Appl. Surf. Sci., 2000, vol. 167, pp. 113–21.10.1016/S0169-4332(00)00534-1 ↗
38. L.R. Hilbert: Corros. Sci., 2006, vol. 48, pp. 3907–23.10.1016/j.corsci.2006.03.004 ↗