journal article·2013-12

Reasonable Temperature Schedules for Cold or Hot Charging of Continuously Cast Steel Slabs

Yang Li, Xin Chen, Ke Liu, Jing Wang, Jin Wen, Jiaquan Zhang

Publisher page

Abstract

Some continuously cast steel slabs are sensitive to transverse fracture problems during transportation or handling away from their storage state, while some steel slabs are sensitive to surface transverse cracks during the following rolling process in a certain hot charging temperature range. It is revealed that the investigated steel slabs with high fracture tendency under room cooling condition always contain pearlite transformation delayed elements, which lead to the internal brittle bainitic structure formation, while some microalloyed steels exhibit high surface crack susceptibility to hot charging temperatures due to carbonitride precipitation. According to the calculated internal cooling rates and CCT diagrams, the slabs with high fracture tendency during cold charging should be slowly cooled after cutting to length from hot strand or charged to the reheating furnace directly above their bainite formation temperatures. Based on a thermodynamic calculation for carbonitride precipitation in austenite, the sensitive hot charging temperature range of related steels was revealed for the determination of reasonable temperature schedules.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. M. Torkar: Mater. Technol., 2010, vol. 44 (6), pp. 327–33.
2. Y.T. Fu, C.S. Qiu, and W.Q. Liu: Iron Steel, 2006, vol. 9 (41), pp. 78–81 (in Chinese).
3. Z.F. Pang, W.Z. Li, and L. Huang: Physical Testing and Chemical Analysis Part a: Physical Testing, 2007, vol. 10 (43), pp. 521–24 (in Chinese).
4. R. Kamada, J. Jkeda, and M. Tawara: Surface Quality Improvement of High Carbon Steels, Steelmaking Conf. Proc., 1995, p. 607.
5. K. Abernethy and R.J. Cinderey: in Conf. Proc. of European Steelmaking Developments and Perspectives in Rolling and Reheating, European Commission, Luxembourg, 1995.
6. B. Mintz: Ironmaking and Steelmaking, 2000, vol. 27 (5), pp. 343–47.10.1179/030192300677633 ↗
7. B. Mintz: ISIJ Int., 1999, vol. 39 (9), pp. 833–55.10.2355/isijinternational.39.833 ↗
8. Y.M. Won, T. Yeo, D.J. Seol, and K.H. Oh: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 779–94.10.1007/s11663-000-0115-y ↗
9. S.K. Ray, B. Mukhopadhyay, and S.K. Bhattacharyya: ISIJ Int., 1996, vol. 36 (5), pp. 611–12.10.2355/isijinternational.36.611 ↗
10. S.A. Golovanenko, V.N. Zikeev, E.B. Serebryanaya, and L.V. Popova: Met. Sci. Heat Treat., 1978, vol. 20 (1), pp. 3–11.10.1007/BF00670433 ↗
11. S.M. Tan, S.J. Gao, and X.J. Wan: J. Mater. Sci. Lett., 1993, vol. 12 (9), pp. 643–46.10.1007/BF00465578 ↗
12. L.S. Moroz and E.T.E. Mingin: Met. Sci. Heat Treat. Met., 1962, vol. 4 (3–4), pp. 135–37.10.1007/BF00816364 ↗
13. V.I. Tkachev, A.K. Litvin, V.A. Teterskii, and A.I. Soshko: Strength Mater., 1972, vol. 4 (12), pp. 1487–91.10.1007/BF01530121 ↗
14. É.A. Savchenkov and A.F. Svetlichkin: Met. Sci. Heat Treat., 1980, vol. 22 (12), pp. 871–76.10.1007/BF00779394 ↗
15. Y. Maehara, K. Yasumoto, and H. Tomono: Mater. Sci. Technol., 1990, vol. 6 (9), pp. 793–806.10.1179/026708390790193664 ↗
16. B. Mintz, A. Cowley, and R. Abushosha: Mater. Sci. Technol., 2000, vol. 16 (1), pp. 1–5.10.1179/026708300773002591 ↗
17. J. Zhao and M.R. Notis: Mater. Sci. Eng., 1995, vol. 15, pp. 135–74.10.1016/0927-796X(95)00183-2 ↗
18. Z.H. Xia, Z.Q. Cao, and D. Luo: J. Iron Steel Res., 2010, vol. 22 (6), pp. 40–45 (in Chinese).
19. P.K. Sokolowski and B.A. Lindsley: Howard I. Sanderow Outstanding Technical Paper, 2009.
20. T.G. Digges, C.R. Irish, and N.L. Carwile: Part of the J. Res. Nat. Bur. Stand., 1948, vol. 41, pp. 545–74.10.6028/jres.041.043 ↗
21. J.S. Kirkaldy and D.V. Doane: Hardenability Concepts with Applications to Steel, TMS-AIME, Warrendale, PA, 1977.
22. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, Vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
23. E. Hurtado-Delgado and R.D. Morales: Metall. Mater. Trans. B, 2001, vol. 32B (5), pp. 919–27.10.1007/s11663-001-0078-7 ↗
24. F. Zarandi and S. Yue: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3823–32.10.1007/s11661-004-0288-0 ↗
25. C. Tercelli: Metall. Plant Technol. Int., 1995, vol. 18 (1), pp. 69–71.
26. A. Carboni, D.W. Ruzza, and S.L. Feldbauer: Iron Steelmaker, 1999, vol. 26 (8), pp. 39–42.
27. X.H. Wang, X.Y. Liu, and W.J. Lv: J. Iron Steel Res., 1998, vol. 6 (10), pp. 32–36 (in Chinese).
28. B. Mintz and J. Arrowsmith: Met. Technol., 1979, vol. 6 (1), pp. 24–32.10.1179/030716979803276471 ↗
29. K.E. Blazek, O.L. III, P.L. Cano, and D.L. Kellogg: Iron Steel Technol., 2008, July, pp. 80–85.
30. Q. Hongzhi: School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, unpublished research, 2010.
31. Y. Li, X. Zhang, and J. Zhang: Int. J. Miner., Metall. Mater., 2013, vol. 20 (2), pp. 1–7.10.1007/s12613-013-0693-8 ↗
32. V.A. Orlov and L.A. Glikman: Sov. Mater. Sci.: A Transl. of Fiziko-Khimicheskaya Mekhanika Materialov/Academy of Sciences of the Ukrainian Ssr, 1965, vol. 3 (1), pp. 204–06.
33. A.F. Sarychev, S.V. Gorostkin, B.A. Sarychev, and O.A. Nikolaev: Metallurgist, 2006, vol. 50 (11–12), pp. 577–80.10.1007/s11015-006-0125-3 ↗
34. N. Saunders, U.K.Z. Guo, X. Li, A.P. Miodownik, and J.-Ph. Schillé: JOM, 2003, vol. 55 (12), pp. 60–65.10.1007/s11837-003-0013-2 ↗
35. J. Trzaska, A. Jagiello, and L.A. Dobrzañski: Arch. Mater. Sci. Eng., 2009, vol. 39 (1), pp. 13–20.
36. Q.L. Yong: Secondary Phases in Steels, Metallurgical Industry Press, 2006.
37. J. Cao, Q. Yong, Q. Liu, X. Sun, and X. Sun: J. Mater. Sci., 2007, vol. 42 (24), pp. 10080-10084.10.1007/s10853-007-2000-4 ↗
38. K. Narita: Trans. ISIJ, 1975, vol. 15, pp. 145–52.10.2355/isijinternational1966.15.145 ↗
39. Q. Yong, X. Sun, G. Yang, and Z. Zhang: Adv. Steels, 2011, pp. 109–17.10.1007/978-3-642-17665-4_14 ↗
40. W.J. Liu and J.J. Jonas: Metall. Trans. A, 1989, vol. 20A, pp. 689–97.10.1007/BF02667586 ↗
41. S.H. Park, S. Yue, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 1641–51.10.1007/BF02804360 ↗
42. K.C. Russell: Adv. Coll. Interface Sci., 1980, vol. 13, pp. 205–113.10.1016/0001-8686(80)80003-0 ↗
43. J. Martin, R. Doherty, and B. Cantor: Stability of Microstructure in Metallic System, Cambridge University Press, Cambridge, U.K., 1996.
44. F. Ma, G. Wen, P. Tang, G. Xu, F. Mei, and W. Wang: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 81–86.10.1007/s11663-010-9454-5 ↗
45. M. Shamanian and A. Najafizadeh: Int. J. ISSI, 2004, vol. 1 (1), pp. 35–37.
46. W. Leslie, R. Rickett, and C. Dotson: Trans. ASM, 1954, pp. 1471–85.