journal article·2012-12Open access

Microstructure and Mechanical Properties of a Nitride-Strengthened Reduced Activation Ferritic/Martensitic Steel

Qiangguo Zhou, Wenfeng Zhang, Wei Yan, Wei Wang, Wei Sha, Yiyin Shan, Ke Yang

Abstract

Nitride-strengthened reduced activation ferritic/martensitic (RAFM) steels are developed taking advantage of the high thermal stability of nitrides. In the current study, the microstructure and mechanical properties of a nitride-strengthened RAFM steel with improved composition were investigated. Fully martensitic microstructure with fine nitrides dispersion was achieved in the steel. In all, 1.4 pct Mn is sufficient to suppress delta ferrite and assure the steel of the full martensitic microstructure. Compared to Eurofer97, the steel showed similar strength at room temperature but higher strength at 873 K (600 °C). The steel exhibited very high impact toughness and a low ductile-to-brittle transition temperature (DBTT) of 243 K (–30 °C), which could be further reduced by purification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Y. Li, T. Nagasaka, and T. Muroga: Plasma Fusion Res., 2010, vol. 5, p. S1036.10.1585/pfr.5.S1036 ↗
2. G.J. Butterworth: J. Nucl. Mater., 1991, vols. 179–181, pp. 135–42.10.1016/0022-3115(91)90028-6 ↗
3. H. Tanigawa, K. Shiba, A. Möslang, R.E. Stoller, R. Lindau, M.A. Sokolov, G.R. Odette, R.J. Kurtz, and S. Jitsukaw: J. Nucl. Mater., 2011, vol. 417, pp. 9–15.10.1016/j.jnucmat.2011.05.023 ↗
4. K. Sawada, K. Kubo, and F. Abe: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 784–87.10.1016/S0921-5093(01)00973-X ↗
5. V. Sklenička, K. Kuchařová, M. Svoboda, L. Kloc, J. Buršík, and A. Kroupa: Mater. Charact., 2003, vol. 51, pp. 35–48.10.1016/j.matchar.2003.09.012 ↗
6. M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1255–62.10.1007/s11661-004-0299-x ↗
7. P. Hu, W. Yan, L. Deng, W. Sha, Y. Shan, and K. Yang: Fusion Eng. Des., 2010, vol. 85, pp. 1632–37.10.1016/j.fusengdes.2010.04.066 ↗
8. W. Yan, P. Hu, L. Deng, W. Wang, W. Sha, Y. Shan, and K. Yang: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1921–33.10.1007/s11661-011-1046-8 ↗
9. M. Rieth, M. Schirra, A. Falkenstein, P. Graf, S. Heger, H. Kempe, R. Lindau, and H. Zimmermann: FZK Report 6911, 2003.
10. K. Sawada, H. Kushima, K. Kimura, and M. Tabuchi: ISIJ Int., 2007, vol. 47, pp. 733–39.10.2355/isijinternational.47.733 ↗
11. H.K. Danielsen and J. Hald: Proc. of the 4th Int. Conf. on Advances in Materials Technology for Fossil Power Plants, R. Viswanathan, D. Gandy, and K. Coleman, eds., ASM International, Materials Park, OH, 2004, pp. 999–1012.10.31399/asm.cp.am-epri-2004p0999 ↗
12. L. Cipolla, H.K. Danielsen, D. Venditti, P.E. Di Nunzio, J. Hald, and M.A.J. Somers: Acta Mater., 2010, vol. 58, pp. 669–79.10.1016/j.actamat.2009.09.045 ↗
13. J. Hald: Int. J. Press. Vess. Pip., 2008, vol. 85, pp. 30–37.10.1016/j.ijpvp.2007.06.010 ↗
14. H.K. Danielsen and J. Hald: Energ. Mater., 2006, vol. 1, pp. 49–57.10.1179/174892306X99732 ↗
15. H.K. Danielsen and J. Hald: CALPHAD, 2007, vol. 31, pp. 505–14.10.1016/j.calphad.2007.04.001 ↗
16. J. Hald: Department of Mechanical Engineering, Technical University of Denmark, Lyngby, Denmark, personal communication, October 22, 2009, Shanghai.
17. M.N. Mungole, G. Sahoo, S. Bhargava, and R. Balasubramaniam: Mater. Sci. Eng. A, 2008, vol. 486, pp. 140–45.10.1016/j.msea.2007.04.105 ↗
18. J. Pesicka, R. Kuzel, A. Dronhofer, and G. Eggeler: Acta Mater., 2003, vol. 51, pp. 4847–62.10.1016/S1359-6454(03)00324-0 ↗
19. K. Sawada, M. Taneike, K. Kimura, and F. Abe: ISIJ Int., 2004, vol. 44, pp. 1243–49.10.2355/isijinternational.44.1243 ↗
20. C. Rong: Secondary Phase in Steels, Metallurgical Industry Press, Beijing, China, 2006, pp. 36–37.
21. J.W. Simmons: Mater. Sci. Eng. A, 1996, vol. 207, pp. 159–69.10.1016/0921-5093(95)09991-3 ↗
22. H. Ghassemi-Armaki, R.P. Chen, K. Maruyama, M. Yoshizawa, and M. Igarashi: Mater. Lett., 2009, vol. 63, pp. 2423–25.10.1016/j.matlet.2009.08.024 ↗
23. K. Hara, H. Aoki, F. Masuyama, and T. Endo: ISIJ Int., 1997, vol. 37, pp. 181–87.10.2355/isijinternational.37.181 ↗
24. K. Kimura, Y. Toda, H. Kushima, and K. Sawada: Int. J. Press. Vess. Pip., 2010, vol. 87, pp. 282–88.10.1016/j.ijpvp.2010.03.016 ↗
25. K. Sawada, K. Kimura, and F. Abe: Mater. Sci. Eng. A, 2003, vol. 358, pp. 52–58.10.1016/S0921-5093(03)00326-5 ↗
26. J. Blach, L. Falat, and P. Ševc: Eng. Failure Anal., 2009, vol. 16, pp. 1397–1403.10.1016/j.engfailanal.2008.09.003 ↗