journal article·2007-12

Assessment of Localized Plastic Deformation during Fatigue in Polycrystalline Copper by Nonlinear Ultrasonic

Avijit Metya, N. Parida, D.K. Bhattacharya, N.R. Bandyopadhyay, S. Palit Sagar

Publisher page

Abstract

Nonlinear ultrasonic (NLU) and conventional ultrasonic techniques have been applied to assess the localized plastic deformation in polycrystalline copper during high-cycle fatigue (HCF). The measurement parameter of NLU, i.e., the NLU parameter, β, has been calculated from the power spectrum of the filtered and amplified received signal. For conventional ultrasonic, longitudinal velocity (V l) and attenuation coefficients (α) have been determined. It has been observed that the position of maximum localized plastic deformation cannot be detected by V l and α, whereas β detects the same at the stage of 30 pct of damage corresponding to the total fatigue life of the material. The result of NLU has also been correlated with the hardness during fatigue. This work reveals the potential of NLU to assess the localized deformation during fatigue much earlier to the failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Fatigue and fracture mechanics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. S. Palit Sagar, N. Parida, S. Das, D.K. Bhattacharya: Scripta Mater., 2006, vol. 55, pp. 199–20210.1016/j.scriptamat.2006.03.037 ↗
2. J.Y. Kim, L.J. Jacobs, J. Qu: J. Acoust. Soc. Am, 2006, vol. 120, pp. 1266–7310.1121/1.2221557 ↗
3. J. Frouin, S. Sathish, T.E. Matikas, J.K Na: J. Mater. Res., 1999, vol. 14, p. 129510.1557/JMR.1999.0176 ↗
4. K.Y Jhang, K.C. Kim: Ultrasonics, 1999, vol. 37, pp. 39–4410.1016/S0041-624X(98)00045-6 ↗
5. P.B. Nagy: Ultrasonics, 1998, vol. 36, pp. 375–8110.1016/S0041-624X(97)00040-1 ↗
6. J.H. Cantrell, W.T. Yost: Int. J. Fatigue, 2001, vol. 23, pp. S487–S49010.1016/S0142-1123(01)00162-1 ↗
7. H. Cantrell, W.T. Yost: J. Appl. Phys., 1997, vol. 81, p. 295710.1063/1.364327 ↗
8. H. Jeong, S.H. Nahm, K.Y. Jhang, Y.H. Nam: Ultrasonics, 2003, vol. 41, pp. 543–4910.1016/S0041-624X(03)00154-9 ↗
9. J.H. Cantrell, W.T. Yost: Phil. Mag., 1994, vol. 69 (2), pp. 315–2610.1080/01418619408244346 ↗
10. T. Suzuki, A. Hikata, C. Elbaum: J. Appl. Phys., 1964, vol. 35, p. 276110.1063/1.1713837 ↗
11. W.L. Morris, O. Buck, R.V. Inman: J. Appl. Phys., 1979, vol. 50 (11), pp. 6737–4110.1063/1.325917 ↗
12. I.Y. Demin, T. Sato, Y. Mochida, K. Fujii, and K.Y. Jhang: Proc. 13th ISNA, 1993, p. 344
13. K.Y. Jhang, I.Y. Demin, T. Sato: J. KOSOMBE, 1993, vol. 14 (1), p. 31
14. G.P. Potriniche, M.F. Horstemeyer, B. Jelinek, G.J. Wagner: Int. J. Fatigue, 2005, vol. 27, pp. 1179–8510.1016/j.ijfatigue.2005.06.015 ↗
15. H. Kawazoe, M. Niewczas: Philos. Mag., 2004, vol. 84 (3–5), pp. 381–9910.1080/14786430310001611635 ↗
16. M. Hirao, H. Ogi, N. Suzuki, T. Ohtani: Acta Mater., 2000, vol. 48, pp. 517–2410.1016/S1359-6454(99)00346-8 ↗
17. L. Cretegny, A. Saxena: Acta Mater., 2001, vol. 49, pp. 3755–6510.1016/S1359-6454(01)00271-3 ↗
18. U. Essmann, U. Gösele, H. Mughrabi: Phil. Mag. A., 1981, vol. 44, p. 40510.1080/01418618108239541 ↗
19. H. Mughrabi, R. Wang, K. Differt, U. Essmann: in ASTM STP 811, J. Lankford, D.L. Davidson, W.L. Morris, R.P. Wei, eds., ASTM, Philadelphia, PA, 1983, p. 5
20. K. Tanaka, T. Mura: J. Appl. Mech., 1981, vol. 48, p. 9710.1115/1.3157599 ↗