Effect of initial grain size of austenite on hot-deformed structure of Ni-30Fe alloy
Source abstract
Abstract
The microstructural evolutions of Ni-30Fe alloys during hot deformation are investigated. Hot-deformed structures of Ni-30Fe alloys with initial austenite grain sizes of 20 and 140 µm are examined under various compressive strains and deformation temperatures. As the initial austenite grain size decreases, dynamic recrystallization (DRX) occurs at lower compressive strain and lower deformation temperature. At deformation temperatures where dynamic recovery occurs instead of the DRX, hot-deformed structures consist of recovered elongated grains until fine-equiaxed grains are evolved by geometric DRX. Critical compressive strain for the geometric DRX decreases with the decrease of initial austenite grain size. Geometric DRX is evolved by the impingement of serrated grain boundaries. The decrease of initial grain size is considered to reduce the critical compressive strain needed for the impingement of serrated grain boundaries. The changes in the effective thickness of austenite grain according to the compressive deformation are examined and the effects of the restoration processes on the effective thickness of austenite grain are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Proc. Int. Symp. on Ultrafine Grained Steel 2001, (ISUGS 2001), S. Takaki and T. Maki, eds., ISIJ, Tokyo, 2001.
2. T. Inoue, S. Torizuka, and K. Nagai: Mater. Sci. Technol., 2001, vol. 17, p. 1329.10.1179/026708301101509520 ↗
3. S. Torizuka, T. Inoue, and K. Nagai: Tetsu-to-Hagané, 2000, vol. 86, p. 17.10.2355/tetsutohagane1955.86.1_17 ↗
4. S.W. Lee, D.H. Seo, and W.Y. Choo: J. Kor. Inst. Met. Mater., 1998, vol. 36, p. 1966.
5. T. Tanaka: Int. Met. Rev., 1981, vol. 26, p. 185.10.1179/imr.1981.26.1.185 ↗
6. Proc. Int. Conf. on the Thermomechanical Processing of Microalloyed Austenite (Thermomechanical Processing of Microalloyed Austenite), A.J. DeArdo, G.A. Ratz, and P.J. Wray, eds., AIME, Pittburgh, PA, 1981.
7. A. Belyakov, T. Sakai, H. Miura, and R. Kaibyshev: Iron Steel Inst. Jpn. Int., 1999, vol. 39, p. 592.10.2355/isijinternational.39.592 ↗
8. D.A. Hughes and W.D. Nix: Metall. Trans. A, 1988, vol. 19A, p. 3013.10.1007/BF02647728 ↗
9. Y. Adachi: CAMPS-ISIJ, 1999, vol. 12, p. 1123.
10. P.J. Hurley, B.C. Muddle, and P.D. Hodgson: Metall. Mater. Trans. A, 2001, vol. 32A, p. 1507.10.1007/s11661-001-0238-z ↗
11. D.W. Suh, S. Torizuka, A. Ohmori, T. Inoue, and K. Nagai: Iron Steel Inst. Jpn. Int., 2002, vol. 42, p. 432.10.2355/isijinternational.42.432 ↗
12. D.W. Suh, T. Inoue, S. Torizuka, A. Ohmori, and K. Nagai: Iron Steel Inst. Jpn. Int., 2002, vol. 42, p. 1026.10.2355/isijinternational.42.1026 ↗
13. P.J. Hurley, P.D. Hodgson, and B.C. Muddle: Scripta Mater., 2001, vol. 45, p. 25.10.1016/S1359-6462(01)00987-3 ↗
14. P.J. Hurley, B.C. Muddle, P.D. Hodgson, C.H.J. Davies, B.P. Wynne, P. Cizek, and M.R. Hickson: Mater. Sci. Forum, 1998, vols. 284–286 p. 159.10.4028/www.scientific.net/MSF.284-286.159 ↗
15. H.J. McQueen, O. Knustad, N. Ryum, and J.K. Solberg: Scripta Metall., 1985, vol. 19, p. 73.10.1016/0036-9748(85)90268-6 ↗
16. A. Gholinia, F.J. Humphreys, and P.B. Prangnell: Acta Mater., 2002, vol. 50, p. 4461.10.1016/S1359-6454(02)00253-7 ↗
17. F.J. Humphreys, P.B. Prangnell, and R. Priestner: Curr. Opin. Solid State Mater. Sci., 2001, vol. 5, p. 15.10.1016/S1359-0286(00)00020-6 ↗
18. A.J. Schwartz, M. Kummar, and B.L. Adams: Electron Backscatter Diffraction in Materials Science, Kluwer Academic/Plenum Publishers, New York, NY, 2000, p. 199.10.1007/978-1-4757-3205-4 ↗
19. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, United Kingdom, 1995, p. 363.
20. P.J. Wray: Metall. Trans. A, 1984, vol. 15A, p. 2009.10.1007/BF02646835 ↗
21. L. Blaz, T. Sakai, and J.J. Jonas: Met. Sci., 1983, vol. 17, p. 609.10.1179/030634583790420448 ↗