journal article·2005-09

Elevated temperature strength of fine-grained INCONEL alloy MA754

T. C. Totemeier, T. M. Lillo, J. A. Simpson

Publisher page

Abstract

Elevated temperature tensile and creep-rupture tests were performed on INCONEL alloy MA754 in an as-rolled, fine-grained condition. Tensile tests were performed at 25 °C, 800 °C, 900 °C, and 1000 °C; creep-rupture tests were performed at 800 °C, 900 °C, and 1000 °C. the elevated temperature strength in the fine-grained condition was approximately 25 pct of that the coarse-grained, annealed condition. While good ductility was observed in tensile tests at a nominal strain rate of 1 × 10−3s−1, ductility in creep-rupture tests was very low, with failure elongations less than 5 pct and no reduction in area. Creep deformation appeared to occur primarily by cavity formation and growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Orthopaedic implants and arthroplasty · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. T.C. Totemeier and T.M. Lillo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 785–95.10.1007/s11661-005-0193-1 ↗
2. Mechanical Properties of Metallic Composites, S. Ochiai, ed., Marcel Dekker, New York, NY, 1994.
3. J.K. Gregory, J.C. Gibeling, and W.D. Nix: Metall. Trans. A, 1985, vol. 16A, pp. 777–87.10.1007/BF02814828 ↗
4. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986, pp. 453–57.
5. R.K. Hotzler and T.K. Glasgow: in Superalloys 1980, J.K. Tien, ed., ASM, Metals Park, OH, 1980, pp. 455–64.
6. J.D. Whittenberger: Metall. Trans. A, 1977, vol. 8A, pp. 1155–63.10.1007/BF02667401 ↗
7. T.E. Howson, J.E. Stulgia, and J.K. Tien: Metall. Trans. A, 1980, vol. 11A, pp. 1599–607.10.1007/BF02654524 ↗
8. J.J. Stephens and W.D. Nix: Metall. Trans. A, 1985, vol. 16A, pp. 1307–24.10.1007/BF02670335 ↗
9. R.W. Lund and W.D. Nix: Acta Metall., 1976, vol. 24, pp. 469–81.10.1016/0001-6160(76)90068-7 ↗