Effects of Phosphorus and Carbon Contents on Amorphous Forming Ability in Fe-based Amorphous Alloys Used for Thermal Spray Coatings
Source abstract
Abstract
Cost-effective Fe-based amorphous alloys used for thermal spray coatings were developed by varying contents of P and C, and their microstructure, hardness, and corrosion resistance were analyzed. In order to achieve chemical compositions having high amorphous forming ability, thermodynamically calculated phase diagrams of Fe-Al-P-C-B five-component system were used, from which compositions of super-cooled liquid having the lowest driving force of formation of crystalline phases were obtained. The thermodynamic calculation results showed that only phases of Fe3P and Fe3C were formed in the Fe78Al2P(18.3−x)C x B1.7 alloy system. Considering driving force curves of Fe3P and Fe3C, the carbon contents were selected to be 6.90 and 7.47 at. pct, when the thermodynamic calculation temperatures were 697 K (414 °C) and 715 K (442 °C), respectively. According to the microstructural analysis of suction-cast alloys, the Fe78Al2P10.83C7.47B1.7 alloy showed a fully amorphous microstructure, whereas the Fe78Al2P11.40C6.9B1.7 and Fe78Al2P10.3C8.0B1.7 alloys contained Fe3P and Fe3C phases. This Fe78Al2P10.83C7.47B1.7 alloy showed the better hardness and corrosion resistance than those of conventional thermal spray coating alloys, and its production cost could be lowered using cheaper alloying elements, thereby leading to the practical application to amorphous thermal spray coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A. Inoue, T. Zhang, and T. Masumoto: Mater. Trans. JIM, 1990, vol. 31, pp. 425–28.10.2320/matertrans1989.31.425 ↗
2. A. Inoue, T. Zhang, N. Nishiyama, K. Ohba, and T. Masumoto: Mater. Trans. JIM, 1993, vol. 34, pp. 1234–37.10.2320/matertrans1989.34.1234 ↗
3. W.B. Kim, B.J. Ye, and S. Yi: Met. Mater. Int., 2004, vol. 10, pp. 1–5.10.1007/BF03027356 ↗
4. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–45.10.1063/1.110520 ↗
5. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
6. X.H. Lin and W.L. Johnson: J. Appl. Phys., 1995, vol. 78, pp. 6514–19.10.1063/1.360537 ↗
7. D.H. Bae, H.K. Kim, S.H. Kim, D.H. Kim and W.T. Kim: Acta Mater., 2002, vol. 50, pp. 1749–59.10.1016/S1359-6454(02)00024-1 ↗
8. H. Shin, Y. Jung, and J. Lee: Met. Mater. Int., 2012, vol. 18, pp. 685–89.10.1007/s12540-012-4018-7 ↗
9. T. Egami, P.J. Flanders, and C.D. Graham Jr.: Appl. Phys. Lett., 1975, vol. 26, pp. 128–30.10.1063/1.88072 ↗
10. Z.P. Lu and C.T. Liu: Acta Mater., 2002, vol. 50, pp. 3501–12.10.1016/S1359-6454(02)00166-0 ↗
11. A. Inoue, W. Zhang, T. Zhang, and K. Kurosaka: Acta Mater., 2001, vol. 29, pp. 2645–52.10.1016/S1359-6454(01)00181-1 ↗
12. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
13. V.D.N. Rao, D.M. Kabat, H.A. Cikanek, C.A. Fucinari, and G. Wuest: Material Systems for Cylinder Bore Applications Plasma Spray Technology, SAE, 1997, pp. 107–32.10.4271/970023 ↗
14. G. Barbezat and G. Wuest: Surf. Eng., 1998, vol. 14, pp. 113–16.10.1179/sur.1998.14.2.113 ↗
15. X. Ji, S. Jiang, H. Li, C. Yan, and L. Jiang: Met. Mater. Int., 2012, vol. 18, pp. 655–60.10.1007/s12540-012-4013-z ↗
16. D.J. Branagan, W.D. Swank, D.C. Haggard, and J.R. Fincke: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2615–21.10.1007/s11661-001-0051-8 ↗
17. H. Kim, K. Lim, B. Seong, and C. Park: J. Mater. Sci., 2001, vol. 36, pp. 49–54.10.1023/A:1004878421908 ↗
18. P. Fauchais, G. Montavon, and G. Bertrand: J. Therm. Spray Technol., 2010, vol. 19, pp. 56–80.10.1007/s11666-009-9435-x ↗
19. K. Asami and K. Hashimoto: Corros. Sci., 1984, vol. 24, pp. 83–97.10.1016/0010-938X(84)90039-8 ↗
20. K. Kishitake, H. Era, and F. Otsubo: J. Therm. Spray Technol., 1996, vol. 5, pp. 476–82.10.1007/BF02645279 ↗
21. A. Inoue and J.S. Gook: Mater. Trans. JIM., 1995, vol. 36, pp. 1180–83.10.2320/matertrans1989.36.1180 ↗
22. H. Li and S. Yi: Mater. Sci. Eng., 2007, vol. A449, pp. 189–92.10.1016/j.msea.2006.02.262 ↗
23. H.W. Sheng, W.K. Luo, F.M. Alamgir, J.M. Bai, and E. Ma: Nature, 2006, vol. 439, pp. 419–25.10.1038/nature04421 ↗
24. Y. Wu, X.D. Hui, Z.P. Lu, Z.Y. Liu, L. Liang, and G.L. Chen: J. Alloys Compd., 2009, vol. 467, pp. 187–90.10.1016/j.jallcom.2007.12.002 ↗
25. D. Musser, C.L. Chien, and H.S. Chen: J. Appl. Phys., 1979, vol. 50, pp. 7659–61.10.1063/1.326828 ↗
26. A. Inoue, A. Takeuchi, and T. Zhang: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1779–93.10.1007/s11661-998-0001-9 ↗
27. M.G. Scott and P. Ramachandrarao: Mater. Sci. Eng., 1977, vol. A29, pp. 137–44.10.1016/0025-5416(77)90118-5 ↗
28. D. Kim, B.-J. Lee, and N.J. Kim: Scripta Mater., 2005, vol. 52, pp. 969–72.10.1016/j.scriptamat.2005.01.038 ↗
29. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
30. TCFE2000: The Thermo-Calc Steels Database, upgraded by B.-J. Lee and B. Sundman at KTH, Stockholm, 1999.
31. B.-J. Lee: Pohang University of Science and Technology (POSTECH), Korea, unpublished update of thermodynamic database.
32. J.-H. Shim, C.-S. Oh, and D.N. Lee: J. Korean Inst. Met. Mater., 1996, vol. 34, pp. 1385–93.
33. V. Raghavan: Phase Diagrams of Ternary Iron Alloys, Indian Institute of Metals, Calcutta, 1988.
34. M. Komaki, T. Mimura, R. Kurahasi, M. Kouzaki, and T. Yamasaki: Mater, Trans. JIM., 2011, vol. 52, pp. 474–80.10.2320/matertrans.MBW201009 ↗
35. T.E. Lister, R.N. Wright, P.J. Pinhero, and W.D. Swank: J. Therm. Spray Technol., 2002, vol. 11, pp. 530–35.10.1361/105996302770348664 ↗
36. Y. Huang, Y. Guo, H. Fan, and J. Shen.: Mater. Lett., 2012, vol. 89, pp. 229–32.10.1016/j.matlet.2012.08.114 ↗
37. Z. Zhou, L. Wang, F. Wang, and Y. Liu.: Trans. Nonferrous Met. Soc. China, 2009, vol. 19, pp. 634–38.10.1016/S1003-6326(10)60123-9 ↗
38. V.R. Raju, F. Schneider, W. Schwarz, J. Eckert, and A. Gebert: Mater. Corr., 2002, vol. 53, pp. 85–90.10.1002/1521-4176(200202)53:2<85::AID-MACO85>3.0.CO;2-9 ↗
39. S.L. Wang, H.X. Li, S.Y. Hwang, S.D. Choi, and S. Yi: Met. Mater. Int., 2012, vol. 18, pp. 607–12.10.1007/s12540-012-4006-y ↗
40. S.L. Wang, H.X. Li, Y.U. Jeong, and S. Yi: Met. Mater. Int., 2012, vol. 18, pp. 791–97.10.1007/s12540-012-5007-6 ↗
41. London Metal Exchange (January 13th of 2012). http://www.lme.com.