journal article·2014-07

Size Effect on Flow Behavior of a Zr55Al10Ni5Cu30 Bulk Metallic Glass in Supercooled Liquid State

X. Y. Wang, L. Deng, N. Tang, J. S. Jin

Publisher page

Abstract

Size effect on the flow behavior of Zr55Al10Ni5Cu30 bulk metallic glass in its supercooled liquid state was investigated by compression tests with specimen diameters varying from 1 to 3 mm. It was found that the smaller the specimen, the higher flow stress exhibits. Strain gradient theory considering friction effect is validated to be suitable to rationalize this size effect. The more geometrical-necessary flow sites needed to be created in smaller specimens, the higher stress it may result in. Considering the efficiency of power dissipation and instability condition, processing maps of different specimens were constructed. With the specimen size decreasing, the processing condition corresponding to low temperature or high strain rate becomes disadvantageous to the thermoplastic forming of Zr55Al10Ni5Cu30, which is closely related to the local stress concentration and strain gradient induced by friction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A. Inoue, K. Ohtera, K. Kita, and T. Masumoto: Jpn. J. Appl. Phys., 1998, vol. 27, pp. 2248-2251.10.1143/JJAP.27.L2248 ↗
2. A. Peker, and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342-2344.10.1063/1.110520 ↗
3. M.F. Ashby, and A.L. Greer: Scripta Mater., 2006, vol. 54, pp. 321-326.10.1016/j.scriptamat.2005.09.051 ↗
4. H.S. Kim, H. Kato, A. Inoue, and H.S. Chen: Acta Mater., 2004, vol. 52, pp. 3813-3823.10.1016/j.actamat.2004.04.031 ↗
5. X.Y. Wang, N. Tang, Z.Z. Zheng, Y.Y. Tang, J.J. Li, and L. Liu: J. Alloys Compd., 2011, vol. 509, pp. 2518-2522.10.1016/j.jallcom.2010.11.070 ↗
6. H.J. Jun, K.S. Lee, J. Eckert, and Y.W. Chang: Metall. Mater. Trans., 2008, vol. 39A, pp. 1831-1837.10.1007/s11661-007-9290-7 ↗
7. K.S. Lee, and Y.W. Chang: Mater. Sci. Eng. A., 2005, vol. 399, pp. 238-243.10.1016/j.msea.2005.03.103 ↗
8. J. Lu, G. Ravichandran, and W.L. Johnson: Acta Mater., 2003, vol. 51, pp. 3429-3443.10.1016/S1359-6454(03)00164-2 ↗
9. H. Bei, Z.P. Lu, S. Shim, G. Chen, and E.P. George: Metall. Mater. Trans., 2010, vol. 41A, pp. 1735-1742.10.1007/s11661-009-9994-y ↗
10. T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi: Intermetallics, 2002, vol. 10, pp. 1071-1077.10.1016/S0966-9795(02)00137-1 ↗
11. N. Li, L. Liu, K.C. Chan, Q. Chen, and J. Pan : Intermetallics, 2009, vol. 17, pp. 227-230.10.1016/j.intermet.2008.07.018 ↗
12. H.J. Huang, J. Shen, and J.F. Sun: Appl. Phys. Lett., 2007, vol. 90, pp. 081919-1-3.
13. S. Xie, and E.P. George: Intermetallics, 2008, vol. 16, pp. 485-489.10.1016/j.intermet.2007.11.013 ↗
14. W.F. Wu, Z. Han, and Y. Li: Appl. Phys. Lett., 2008, vol. 93, pp. 061908-1-3.
15. Z.H. Han, L. He, M.B. Zhong, and Y.L. Hou: Mater. Sci. Eng. A., 2009, vol. 513-514, pp. 344-351.10.1016/j.msea.2009.02.011 ↗
16. C.J. Lee, J.C. Huang, and T.G. Nieh: Appl. Phys. Lett., 2007, vol. 91, pp. 161963-1-3.
17. H.Y. Lai, C.J. Lee, Y.T. Cheng, H.M. Chou, X.H. Du, and C.I. Chang: Scripta Mater., 2008, vol. 58, pp. 890-893.10.1016/j.scriptamat.2008.01.009 ↗
18. K.S. Lee, W. Bang, T.K. Ha, S. Ahn, and Y.W. Chang: J. Metastable Nanocryst. Mater., 2003, vol. 15-16, pp. 155-160.10.4028/www.scientific.net/JMNM.15-16.155 ↗
19. Y. Kawamura, H. Kato, A. Inoue, and T. Masumota: Appl. Phys. Lett., 1995, vol. 67, pp. 2008-2010.10.1063/1.114769 ↗
20. G. Kumar, H.X. Tang, and J. Schroers: Nat., 2009, vol. 457, pp. 868-872.10.1038/nature07718 ↗
21. X. Wu, J.J Li, Z.Z. Zheng, L. Liu, and Y. Li: Scripta Mater., 2010, vol. 63, pp. 469-472.10.1016/j.scriptamat.2010.05.004 ↗
22. P.J. Tao, Y.Z. Yang, X.J. Bai, Z.W. Xie, X.C. Chen, Z.J. Dong, J.G. Wen, and H.J. Long: J. Non Cryst. Solids., 2008, vol. 354, pp. 3742-3746.10.1016/j.jnoncrysol.2008.04.012 ↗
23. A.H. Vormelker, O.L. Vatamanu, L. Kecskes, and J.J. Lewandowski: Metall. Mater. Trans., 2008, vol. 39A, pp. 1922-1934.10.1007/s11661-007-9410-4 ↗
24. H.J. Jun, K.S. Lee, S.C. Yoon, H.S. Kim, and Y.W. Chang: Acta Metall., 2010, vol. 58, pp. 4267-4280.
25. H. Li, A. Ghosh, Y.H. Han, R.C. Bradt: J. Mater. Res., 1993, vol. 8, pp. 1028-1032.10.1557/JMR.1993.1028 ↗
26. J.H. Deng, M.W. Fu, and W.L. Chan: Mater. Sci. Eng. A., 2011, vol. 528, pp. 4799-4806.10.1016/j.msea.2011.03.005 ↗
27. Y.P. Li, E. Onodera, and A. Chiba: Metall. Mater. Trans., 2010, vol 41A, pp. 224-232.10.1007/s11661-009-0066-0 ↗
28. M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, and U. Engel: CIRP Ann. Manuf. Technol., 2001, vol. 50, pp. 445–62.10.1016/S0007-8506(07)62991-6 ↗
29. A.S. Argon, and H.Y. Kuo: Mater. Sci. Eng. A., 1979, vol. 39, pp. 101-109.10.1016/0025-5416(79)90174-5 ↗
30. C.C. Lam, C.M. Chong: Mater. Sci. Eng. A., 2001, vol. 318, pp. 313-319.10.1016/S0921-5093(01)01329-6 ↗
31. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, and K.A. Lark: Metall. Trans. A., 1984, vol. 15A, pp. 1883-1892.10.1007/BF02664902 ↗
32. N. Srinivasan, and Y.V.R.K. Prasad: Metall. Mater. Trans., 1994, vol. 25A, pp. 2275-2284.10.1007/BF02652327 ↗