journal article·2011-11Open access

Effect of Nitrogen Content on the Microstructure and Mechanical Properties of Ti-Mo-N Coating Films

Shoko Komiyama, Yuji Sutou, Junichi Koike

Abstract

Effects of nitrogen content on the microstructure, hardness, and friction coefficient of Ti-Mo-N coating films were investigated. Ti-Mo-N films were deposited onto an AISI304 stainless steel substrate by reactive r.f. sputtering in the mixture of argon and nitrogen gases with various gas flow rates. The hardness and friction coefficients were measured by nanoindentation and ball-on-disk testing systems, respectively. The hardness of the Ti-Mo-N films increased with increasing a nitrogen gas flow rate $$ \left( {f_{{{\text{N}}2 }} } \right) $$ and showed a maximum hardness of about 30 GPa at a $$ f_{{{\text{N}}2 }} = 0.3\,{\text{ccm}} $$ . On the one hand, the films deposited at $$ f_{{{\text{N}}2 }} \ge 1.0\;{\text{ccm}} $$ showed a constant hardness value of approximately 25 GPa. On the other hand, the friction coefficient of the Ti-Mo-N film decreased with increasing N content and was 0.44 in the film deposited at $$ f_{{{\text{N}}2 }} = 2.0\;{\text{ccm}}. $$
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. H. Holleck: J. Vac. Sci. Technol. A, 1986, vol. 4, pp. 2661-69.10.1116/1.573700 ↗
2. R.A. Andrievski, I.A. Anisimova, and V.P. Anisimov: Thin Solid Films, 1991, vol. 205, pp. 171-75.10.1016/0040-6090(91)90299-D ↗
3. W.D. Münz: J. Vac. Sci. Technol. A, 1986, vol. 4, pp. 2717-25.10.1116/1.573713 ↗
4. O. Knotek, W.D. Münz, and T. Leyendecker: J. Vac. Sci. Technol. A, 1987, vol. 5, pp. 2173-79.10.1116/1.574948 ↗
5. P.H. Mayrhofer, A. Hörling, L. Karlsson, J. Sjölén, T. Larsson, C. Mitterer, and L. Hultman: Appl. Phys. Lett., 2003, vol. 83, pp. 2049-51.10.1063/1.1608464 ↗
6. S. Vepřek, S. Reiprich, and Li. Shizhi: Appl. Phys. Lett., 1995, vol. 66, pp. 2640-42.10.1063/1.113110 ↗
7. S. Vepřek and S. Reiprich: Thin Solid Films, 1995, vol. 268, pp. 64-71.10.1016/0040-6090(95)06695-0 ↗
8. W. Gissler: Surf. Coat. Technol., 1994, vol. 68/69, pp. 556-63.10.1016/0257-8972(94)90217-8 ↗
9. C. Mitterer, P.H. Mayrhofer, M. Beschliesser, P. Losbichler, P. Warbichler, F. Hofer, P.N. Gibson, W. Gissler, H. Hruby, J. Musil, and J. Vlček: Surf. Coat. Technol., 1999, vol. 120-121, pp. 405-11.10.1016/S0257-8972(99)00489-2 ↗
10. Y.H. Lu, Y.G. Shen, Z.F. Zhou, and K.Y. Li: Wear, 2007, vol. 262, pp. 1372-79.10.1016/j.wear.2007.01.024 ↗
11. Y.H. Lu, Z.-J. Liu, and Y.G. Shen: Acta Mater., 2006, vol. 54, pp. 2897-2905.10.1016/j.actamat.2006.02.027 ↗
12. Z.P. Huang, Y. Sun, and T. Bell: Wear, 1994, vol. 173, pp. 13-20.10.1016/0043-1648(94)90252-6 ↗
13. C.-L. Chang, C.-T. Lin, P.-C. Tsai, W.-Y. Ho, and D.-Y. Wang: Thin Solid Films, 2008, vol. 516, pp. 5324-29.10.1016/j.tsf.2007.07.087 ↗
14. H.-S. Ahn, I.-W. Lyo, and D.-S. Lim: Surf. Coat. Technol., 2000, vol. 133-134, pp. 351-61.10.1016/S0257-8972(00)00892-6 ↗
15. M. Ürgen, O.L. Eryılmaz, A.F. Çukır, E.S. Kayali, B. Nilüfer, and Y. Işik: Surf. Coat. Technol., 1997, vol. 94-95, pp. 501-06.10.1016/S0257-8972(97)00432-5 ↗
16. P.J. Rudnik, M.E. Graham, and W.D. Sproul: Surf. Coat. Technol., 1991, vol. 49, pp. 293-97.10.1016/0257-8972(91)90072-5 ↗
17. Q. Yang, L.R. Zhao, P.C. Patnaik, and X.T. Zeng: Wear, 2006, vol. 261, pp. 119-25.10.1016/j.wear.2005.07.008 ↗
18. F. Vaz, J. Ferreira, E. Ribeiro, L. Rebouta, S. Lanceros-Méndez, J.A. Mendes, E. Alves, Ph. Goudeau, J.P. Rivière, F. Ribeiro, I. Moutinho, K. Pischow, and J. de Rijk: Surf. Coat. Technol., 2005, vol. 191, pp. 317-23.10.1016/j.surfcoat.2004.01.033 ↗
19. P.Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corros. Sci., 1996, vol. 38, pp. 1649-67.10.1016/S0010-938X(96)00041-8 ↗
20. J.-E. Sundgen, B.-O. Johansson, S.-E. Karlsson, and H.T.G. Hentzell: Thin Solid Films, 1983, vol. 105, pp. 367-84.10.1016/0040-6090(83)90319-X ↗
21. S. Inoue, T. Ohba, H. Takata, and K. Koterazawa: Thin Solid Films, 1999, vol. 343-344, pp. 230-33.10.1016/S0040-6090(98)01632-0 ↗
22. T. Polcar, N.M.G. Parreira, and A. Cavaleiro: Wear, 2007, vol. 262, pp. 655-65.10.1016/j.wear.2006.07.010 ↗
23. B.-Y. Shew and J.-L. Huang: Surf. Coat. Technol., 1995, vol. 71, pp. 30-36.10.1016/0257-8972(94)02300-F ↗