journal article·2013-09

Martensitic Phase Transformation from Non-isothermally Deformed Austenite in High Strength Steel 22SiMn2TiB

Z. M. Shi, Jian Li, B. Chi, J. Pu, Y. S. Zhang, M. Q. Wang, J. Shi, H. Dong

Publisher page

Abstract

Non-isothermal compressive deformation was performed on high strength steel 22SiMn2TiB for the study of martensitic phase transformation from deformed austenite. The transformation start temperature Ms decreased with the increase of deformation from 0 to 50 pct, and the variation of deformation rate (0.1 and 10 s−1) and the appearance of deformation-induced ferrite and bainite showed no influence on the change of Ms temperature. The deformation at both the rates increased the volume fraction of retained austenite; however, the carbon content of retained austenite decreased at 10 s−1 and remained basically unchanged at 0.1 s−1. The yield strength of austenite at Ms temperature and the stored energy in deformed austenite were experimentally obtained, with which the relationships between the change of Ms temperature and the thermodynamic driving force for martensitic phase transformation from deformed austenite were established by the use of the Fisher-ADP–Hsu model. And finally, the transformation kinetics was analyzed by the Magee–Koistinen–Marhurger equation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. M. Naderi, A. Saeed-Akbari, W. Bleck: Mater. Sci. Eng. A: Struct., 2008, Vol. 487, pp. 445-55.10.1016/j.msea.2007.10.057 ↗
2. M. Naderi, A. Saeed-Akbari, W. Bleck: Mater. Lett., 2008, Vol. 62, pp. 1132-35.10.1016/j.matlet.2007.07.068 ↗
3. M. Merklein, J. Lechler: J. Mater. Process. Tech., 2006, Vol. 177, pp. 452-55.10.1016/j.jmatprotec.2006.03.233 ↗
4. A. Bardelcik, C.S. Salisbury, S. Winkler, M.A. Wells, and M.J. Worswick: Int. J. Impact Eng., 2010, vol. 37, pp. 694–702.10.1016/j.ijimpeng.2009.05.009 ↗
5. Z.M. Shi, K. Liu, M.Q. Wang, J. Shi, H. Dong, J. Pu, B. Chi, Y.S. Zhang, J. Li: Mater. Sci. Eng. A: Struct., 2012, Vol. 535, pp. 290-96.10.1016/j.msea.2011.12.088 ↗
6. T. Y. Hsu: J. Mater. Sci., 1985, Vol. 20, pp. 23-31.10.1007/BF00555894 ↗
7. T. Y. Hsu, H. B. Chang, S. F. Luo: J. Mater. Sci., 1983, Vol. 18, pp. 3206-12.10.1007/BF00544144 ↗
8. T. Y. Hsu, J. Li, Z. P. Zeng: Metallography, 1986, Vol, 19, pp. 305-16.10.1016/0026-0800(86)90018-2 ↗
9. S.M. Yan, J. Pu, B. chi, L. Jian: J. Alloys Compd., 2007, vol. 507, pp. 331–34.10.1016/j.jallcom.2010.07.194 ↗
10. C. S. Roberts: Trans. AIME, 1953, vol. 197, pp. 203-04.
11. T. Y. Hsu, X. M. Li: Scr. Metall.et Metal., 1983, Vol. 17, pp. 1285-88.10.1016/0036-9748(83)90217-X ↗
12. T. Y. Hsu: Heat Treatment, 2004, Vol.19, pp. 1-17.
13. T. Y. Hsu: Martensitic transformation and martensite, 2nd ed, Beijing: Science Press, 1999.
14. J. Li: Ph.D. Thesis, Central Iron and Steel Research Institute, Beijing, 1988.
15. C. L. Magee: Phase Transformations. American Society of Metals, Metals Park, OH, 1970, pp. 115–56.
16. D. P. Koistinen, R. E. Marburger: Acta Metall., 1959, Vol. 7, pp. 59-60.10.1016/0001-6160(59)90170-1 ↗