journal article·2010-08

The Study of Fatigue Behaviors and Dislocation Structures in Interstitial-Free Steel

Chia-Chang Shih, New-Jin Ho, Hsing-Lu Huang

Publisher page

Abstract

There are three types of cyclic hardening for cyclically deformed interstitial-free (IF) steels. The magnitude of cyclic hardening was unobvious and dislocation cells smaller than 2 μm were very hard to find when total strain amplitude (Δe/2) was controlled to within 0.1 pct. When Δe/2 is increased to 0.125 to 0.3 pct, secondary cyclic hardening takes place prior to fatigue failure. Δe/2 = 0.6 pct, following an initial rapid-hardening stage. Dislocation cells smaller than 2 μm tend to develop near grain boundaries and triple junction of the grains while cycling just above Δe/2 = 0.125 pct. Such dislocation development results in secondary hardening. However, no failure occurs if cycling just below Δe/2 = 0.1 pct; hence, the fatigue limit for IF steel should be very close to Δe/2 = 0.1 pct.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. T. Luoh and C.P. Chang: Mater. Sci. Eng. A, 1998, vol. 256A, pp. 18–24.10.1016/S0921-5093(98)00812-0 ↗
2. J. Toribio and V. Kharin: J. Mater. Sci., 2006, vol. 41, pp. 6015–25.10.1007/s10853-006-0364-5 ↗
3. V.T. Kuokkala and P. Kettunen: Acta Metall., 1985, vol. 33, pp. 2041–47.10.1016/0001-6160(85)90127-0 ↗
4. J. Polák, K. Obrtlík, M. Hájek, and A. Vašek: Mater. Sci. Eng. A, 1992, vol. 151A, pp. 19–27.10.1016/0921-5093(92)90177-3 ↗
5. T. Magnin, C. Ramade, J. Lepinoux, and L.P. Kubin: Mater. Sci. Eng. A, 1989, vol. 118A, pp. 41–51.10.1016/0921-5093(89)90056-7 ↗
6. R. Wang and H. Mugrhabi: Mater. Sci. Eng., 1984, vol. 63, pp. 147–63.10.1016/0025-5416(84)90118-6 ↗
7. M. Gerland and P. Violan: Mater. Sci. Eng., 1986, vol. 84, pp. 23–33.10.1016/0025-5416(86)90219-3 ↗
8. J.C. Figueroa, S.P. Bhat, R. Delaveaux, S. Murzenski, and C. Laird: Acta Metall., 1981, vol. 29, pp. 1667–78.10.1016/0001-6160(81)90001-8 ↗
9. T.L. Lin, J.S. Wu, and X.F. Chen: Mater. Sci. Eng., 1987, vol. 86, pp. 19–27.10.1016/0025-5416(87)90439-3 ↗
10. M. Anglada and F. Guiu: Philos. Mag. A, 1981, vol. 44A, pp. 523–41.10.1080/01418618108236160 ↗
11. H. Mori, M. Tokuwame, and T. Miyazaki: Philos. Mag. A, 1979, vol. 40A, pp. 409–33.10.1080/01418617908234849 ↗
12. H. Mori, N. Oba, T. Miyazaki, and T. Kozakai: Philos. Mag. A, 1980, vol. 42A, pp. 483–94.10.1080/01418618008239371 ↗
13. B. Šesták, V. Novák, and S. Libovický: Philos. Mag. A, 1988, vol. 57A, pp. 353–81.10.1080/01418618808204675 ↗
14. H. Mughrabi, K. Herz, and X. Stark: Int. J. Fract., 1981, vol. 17, pp. 193–220.10.1007/BF00053520 ↗
15. H. Mughrabi, K. Herz, and X. Stark: Acta Metall., 1976, vol. 24, pp. 659–68.10.1016/0001-6160(76)90086-9 ↗
16. C. Sommer, H. Mughrabi, and D. Lochner: Acta. Mater., 1998, vol. 46, pp. 1527–36.10.1016/S1359-6454(97)00362-5 ↗
17. H. Abdel-Raouf and A. Plumtree: Metall. Trans., 1971, vol. 2, pp. 1863–67.10.1007/BF02664261 ↗
18. O.K. Chopra and C.V.B. Gowda: Philos. Mag., 1974, vol. 30, pp. 583–91.10.1080/14786439808206583 ↗
19. S. Ikeda: Trans. Jpn. Inst. Met., 1981, vol. 22, pp. 267–73.10.2320/matertrans1960.22.267 ↗
20. C.C. Shih, N.J. Ho, and H.L. Huang: J. Mater. Sci., 2009, vol. 44, pp. 212–20.10.1007/s10853-008-3096-x ↗
21. H. Mughrabi: Scripta Metall., 1979, vol. 13, pp. 479–84.10.1016/0036-9748(79)90073-5 ↗
22. T. Louh and C.P. Chang: Acta Mater., 1996, vol. 44, pp. 2683–95.10.1016/1359-6454(95)00400-9 ↗
23. S. Majumdar, D. Bhattacharjee, and K.K. Ray: Metall. Mat. Trans. A, 2008, vol. 39A, pp. 1676–90.10.1007/s11661-008-9537-y ↗
24. N. Narasaiah, P.C. Chakraborti, R. Maiti, and K.K. Ray: ISIJ Int., 2005, vol. 45, pp. 127–32.10.2355/isijinternational.45.127 ↗
25. T. Endo and Y. Murakami: J. Eng. Mater. Technol., 1987, vol. 109, pp. 124–29.10.1115/1.3225951 ↗
26. J. Awatani, K. Katagiri, and H. Nakai: Metall. Trans. A, 1978, vol. 9A, pp. 111–16.10.1007/BF02647179 ↗
27. T. Ogura, T. Masumoto, and Y. Imai: Trans. Jpn. Inst. Met., 1976, vol. 17, pp. 733–42.10.2320/matertrans1960.17.733 ↗
28. J. Awatani, K. Katagiri, and T. Shiraishi: Metall. Trans. A, 1976, vol. 7A, pp. 807–10.10.1007/BF02644077 ↗
29. J. Awatani, K. Katagiri, and K. Koyanagi: Philos. Mag. A, 1978, vol. 38A, pp. 349–52.10.1080/01418617808239239 ↗
30. H.L. Huang and N.J. Ho: Mater. Sci. Eng. A, 2000, vol. A293, pp. 235–41.10.1016/S0921-5093(00)01026-1 ↗
31. H.L. Huang, N.J. Ho, and W.B. Lin: Mater. Sci. Eng. A, 2000, vol. A279, pp. 261–65.10.1016/S0921-5093(99)00634-6 ↗
32. H.L. Huang and N.J. Ho: Mater. Sci. Eng. A, 2000, vol. A279, pp. 254–60.10.1016/S0921-5093(99)00635-8 ↗