Computer-Aided Development and Simulation Tools for Shape-Memory Actuators
Source abstract
Abstract
This article discusses the dynamic properties of shape-memory alloy (SMA) actuators, which are characterized by their rate of heating and cooling procedures and can be described only insufficiently for different boundary conditions. Based on an analysis of energy fluxes into and out of the actuator, a numerical model implemented in MATLAB/SIMULINK (MathWorks, Natick, MA) is presented. Besides the fluxes, the time-variable parameters like the latent heat of transformation or the influence of stress on the transformation temperatures are also included in the model. These parameters, depending on actuator geometry and temperature, the fraction of martensite, and the environmental conditions, are considered in the simulation in real time. In addition, this publication sums up the needed empirical data (e.g., fatigue behavior) to create a general-purpose engineering tool. The SMA wire-based actuation system can be configured by drag-and-drop tools and finally simulated and graphically displayed for different actuator systems. The development and verification of such a tool (called CASMADA) from theoretical equations to the verification on real elements is the main topic of this publication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. K. Worden, W.A. Bullough, and J. Haywood: Smart Technologies, World Scientific, London, UK, 2003, pp. 109, 126.10.1142/4832 ↗
2. E.G. Welp and S. Langbein: Neue Ansätze zur Baukastensystematik von Formgedächtnisaktoren, VDI Berichte zur VDI−Tagung Mechatronik 2007, Innovative Produktentwicklung, Wiesloch 23./24.05.07, VDI−Bericht Nr. 1971, p. 417–33.
3. H. Meier, A. Czechowicz, and S. Langbein: Concepts for Standardized Shape Memory Actuators for Positioning Applications, Conference Proceedings, SMASIS 2010, Conference for Smart Materials, Adaptive Structures and Intelligent Systems, ASME, Philadelphia, PA, 2010.10.1115/SMASIS2010-3741 ↗
4. Richtlinie VDI 2221 (directive): Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte, VDI Verlag, Düsseldorf Mai, Germany, 1993.
5. H. Meier, A. Czechowicz, and C Haberland: Control Loops with Detection of Inner Electrical Resistance and Fatigue-Behaviour by Activation of NiTi-Shape Memory Alloys, Conference Proceedings, ESOMAT 2009, 05006.p1-p8 EDP Sciences, Prague, Czech Republic, 2009.10.1051/esomat/200905006 ↗
6. S. Langbein, T. Sadek, and A. Czechowicz: Adaptive Resetting of SMA-Actuators, Conference Proceedings, SMASIS 2010, Conference for Smart Materials, Adaptive Structures and Intelligent Systems, ASME, Philadelphia, PA, 2010.10.1115/SMASIS2010-3749 ↗
7. C. Liang and C.A. Rogers: J. Intell. Mater. Syst. Struct., 1990, vol. 1, pp. 207–34.10.1177/1045389X9000100205 ↗
8. L. Ölschläger: Ph.D. Dissertation, Ruhr-University, Bochum, Germany, 2004.
9. F. Schiedeck: Ph.D. Dissertation, Leibniz University, Hannover, Germany, 2009.
10. T. Sadek, R. Theiß, and S. Langbein: Content-based Support for Annotating new Content in a Wiki for Shape Memory Technology, Proceedings of the 31st Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, August 2011.10.1115/DETC2011-48240 ↗
11. H. Meier, A. Czechowicz, and S. Langbein: Smart Control Systems for Smart Materials, Conference Proceedings SMST2010: The International Conference on Shape Memory and Superelastic Technologies, 2010, ASM International, Pacific-Grove, CA, pp. 224–25.