journal article·2003-12

Thermodynamics of stress-induced interstitial redistribution in body-centered cubic metals

William C. Johnson, J. Y. Huh

Publisher page

Abstract

A set of open-system elastic constants used to approximate the redistribution of interstitial atoms among the three different interstitial sublattices in a body-centered cubic (bcc) metal is derived accounting for the tetragonal nature of the compositional strain in the presence of a nonhydrostatic stress. Predictions of the stress-induced composition change are calculated and compared to the actual solution and to two other approximation schemes, one based on a hydrostatic compositional strain and one based on ignoring the compositional self-stress. The open-system elastic constants give a qualitatively and quantitatively accurate representation of the composition changes when the far-field composition is greater than a few percent. For very small far-field compositions, less than about 10−4, the compositional self-stress can be ignored in calculating the stress-induced interstitial redistribution. However, for larger far-field compositions, neglecting the compositional self-stress can overestimate significantly the degree of interstitial redistribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc., 1949, vol. A199, p. 104.
2. D.M. Barnett, G. Wang, and W.D. Nix: Acta Metall., 1982, vol. 30, p. 2035.10.1016/0001-6160(82)90106-7 ↗
3. W.C. Johnson and P.W. Voorhees: Metall. Trans. A, 1985, vol. 16A, pp. 337–47.10.1007/BF02814332 ↗
4. D. McLean: Grain Boundaries in Metals, Oxford University Press, London, 1957, p. 116.
5. A.R. Troiano: Trans. ASM, 1960, vol. 52, pp. 54–80.
6. D.G. Westlake: Trans. ASM, 1969, vol. 62, pp. 1000–06.
7. C.A. Hippsley and S.G. Druce: Acta Metall., 1983, vol. 31, pp. 1861–72.10.1016/0001-6160(83)90132-3 ↗
8. H.F. Matare: Defect Electronics in Semiconductors, John Wiley & Sons, Inc., New York, NY, 1971, p. 83.
9. J.C.M. Li, R.A. Oriani, and L.S. Darken: Phys. Chem. Neue Folge, 1966, vol. 49, pp. 271–90.10.1524/zpch.1966.49.3_5.271 ↗
10. J.C.M. Li: Metal. Trans. A, 1978, vol. 9A, pp. 1353–80.
11. Y.T. Chou, M. Gao, M. Lu, and R.P. Wei: Mater. Sci. Eng., 1983, vol. 58, pp. 245–55.10.1016/0025-5416(83)90051-4 ↗
12. T.Y. Zhang, T.A. Mason, and J.E. Hack: Scripta Metall. Mater., 1992, vol. 26, pp. 139–44.10.1016/0956-716X(92)90385-R ↗
13. T.Y. Zhang, H. Sheu, and J.E. Hack: Scripta Metall. Mater., 1992, vol. 27, pp. 1605–10.10.1016/0956-716X(92)90152-5 ↗
14. T.Y. Zhang and J.E. Hack: Metal. Mater. Trans. A, 1999, vol. 30A, pp. 155–59.10.1007/s11661-999-0203-9 ↗
15. F.C. Larché and J.W. Cahn: Acta Metall., 1973, vol. 21, pp. 1051–63.10.1016/0001-6160(73)90021-7 ↗
16. F.C. Larché and J.W. Cahn: Acta Metall., 1985, vol. 33, pp. 331–57.10.1016/0001-6160(85)90077-X ↗
17. C. Lupis: Thermodynamics, John Wiley & Sons, Inc., New York, NY, 1971, p. 478.
18. J.P. Hirth and H. Lothe: Theory of Dislocations, John Wiley & Sons, Inc., New York, NY, 1971, p. 83.
19. Q.X. Bai, W.Y. Chu, and C.M. Hsiao: Scripta Metall., 1987, vol. 21, pp. 613–18.10.1016/0036-9748(87)90370-X ↗