Microstructure and Magnetic Properties of Ni2(Mn,Fe)Ga Heusler Alloys Rapidly Solidified by Melt Spinning
Source abstract
Abstract
The microstructure and magnetic properties of Ni2MnGa base alloys with “Fe” substitution in place of “Mn” are studied. The processing technique used is melt spinning at wheel speeds of 20 m/s and 30 m/s followed by annealing at 1273 K (1000 °C) for 1 hour. Fe content is varied from 2 at. pct to 11 at. pct for alloys of Ni50Mn(25−x)Fe x Ga25 with Heusler stoichiometry. Austenite with B2 partial atomic ordering and premartensitic tweed structures were found at room temperature for all the alloys at different wheel speeds. After annealing at 1273 K (1000 °C) for 1 hour, austenite phase with L21 Heusler atomic ordering is stabilized in samples of all the processing conditions. Saturation magnetization, martensitic transformation temperature, and Curie temperature are measured. Martensite temperature and Curie temperature increase in proportion to iron content in the alloy. Saturation magnetization is sensitive to the phase content and compositional inhomogeneities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Creativity in Education and Neuroscience · Piezoelectric Actuators and Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K. Ullakko, J.K. Huang, C. Kantner, V.V. Kokorin, and R.C. O’Handley: Appl. Phys. Lett., 1996, vol. 69, pp. 1966-68.10.1063/1.117637 ↗
2. M.L. Richard, J. Feuchtwanger, S.M. Allen, R.C. O’Handley, P. Lazpita, J.M. Barandiaran, J. Gutierrez, B. Ouladdiaf, C. Mondelli, T. Lograsso, and D. Schlagel: Phil. Mag., 2007, vol. 87, pp. 3437-47.10.1080/14786430701297582 ↗
3. D. Niklasch, J. Dadda, H.J. Maier, and I. Karman: J. Mater. Sci., 2008, vol. 43, pp. 6890-901.10.1007/s10853-008-2997-z ↗
4. M.E. Gruner, P. Entel, I. Opahle, and M. Richter: J. Mater. Sci., 2008, vol. 43, pp. 3825-31.10.1007/s10853-007-2291-5 ↗
5. J.Y. Liu, H. Lu, J.M. Chen, C. Alain, and T. Wu: J. Mater. Sci., 2008, vol. 43, pp. 4921-28.10.1007/s10853-008-2716-9 ↗
6. H.B. Wang, F. Chen, Z.Y. Gao, W. Cai, and L.C. Zhao: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 990-93.10.1016/j.msea.2006.01.101 ↗
7. D. Soto, F.A. Hernández, T. Krenke, H. Flores-Zúñiga, X. Moya, L. Mañosa, A. Planes, S. Aksoy, and M. Acet: Phys. Rev. B, 2008, vol. 77, p. 184103.10.1103/PhysRevB.77.184103 ↗
8. O. Söderberg, K. Koho, T. Sammi, X.W. Liu, A. Sozinov, N. Lanska, and V.K. Lindroos: Mater. Sci. Eng. A, 2004, vol. 378, pp. 389-93.10.1016/j.msea.2003.10.364 ↗
9. O. Heczko, P. Svec, D. Janickovic, and K. Ullakko: IEEE Trans. Magn., 2002, vol. 38, pp. 2841-43.10.1109/TMAG.2002.802471 ↗
10. R.V.S. Prasad and G. Phanikumar: J. Mater. Sci., 2009, vol. 44, pp. 2553-59.10.1007/s10853-009-3333-y ↗
11. R.V.S. Prasad and G. Phanikumar: Mater. Sci. Forum, 2010, vol. 649, pp. 35-40.10.4028/www.scientific.net/MSF.649.35 ↗
12. D. Akahoshi, R. Hatakeyama, M. Nagao, T. Asaka, Y. Matsui, and H. Kuwahara: Phys. Rev. B, 2008, vol. 77, p. 054404.10.1103/PhysRevB.77.054404 ↗
13. I.M. Robertson and C.M. Wayman: Metallography, 1984, vol. 17, pp. 149-63.10.1016/0026-0800(84)90019-3 ↗
14. S. Shapiro, J.Z. Larese, Y. Noda, S.C. Moss, and L.E. Tanner: Phys. Rev. Lett., 1986, vol. 57, pp. 3199-3202.10.1103/PhysRevLett.57.3199 ↗
15. S. Bysakh, P.K. Das, and K. Chattopadhyay: Mater. Sci. Eng. A, 2001, vols. 304–306, pp. 608-11.10.1016/S0921-5093(00)01544-6 ↗
16. V.A. Chernenko, J. Pons, C. Seguí, and E. Cesari: Acta Mater., 2002, vol. 50, pp. 53-60.10.1016/S1359-6454(01)00320-2 ↗
17. A.G. Khachaturyan, S.M. Shapiro, and S. Semenovskaya: Phys. Rev. B, 1991, vol. 43, pp. 10832-43.10.1103/PhysRevB.43.10832 ↗
18. S. Kartha, J.A Krumhansl, J.P. Sethna, and L.K. Wickham: Phys. Rev. B, 1995, vol. 52, pp. 803-21.10.1103/PhysRevB.52.803 ↗
19. S. Kartha, T. Castan, J.A. Krumhansl, and J.P. Sethna: Phys. Rev. Lett., 1991, vol. 67, pp. 3630-33.10.1103/PhysRevLett.67.3630 ↗
20. X. Jin, M. Marioni, D. Bono, S.M. Allen, R.C. O’Handley, and T.Y. Hsu: J. Appl. Phys., 2002, vol. 91, pp. 8222-24.10.1063/1.1453943 ↗
21. K. Tsuzaki, N. Harada, and T. Maki: J. Phys. IV, 1995, vol. 5, pp. C8-167.
22. R.W. Overholser, M. Wuttig, and D.D. Neumann: Scripta Mater., 1999, vol. 40, pp. 1095-1102.10.1016/S1359-6462(99)00080-9 ↗
23. K. Tsuchiya, A. Ohashi, D. Ohtoyo, H. Nakayama, M. Umemoto, and P.G. McCormick: Mater. Trans., JIM, 2000, vol. 8, pp. 938-42.10.2320/matertrans1989.41.938 ↗
24. F. Chen, H.B. Wang, Y.F. Zheng, W. Cai, and L.C. Zhao: J. Mater. Sci., 2005, vol. 40, pp. 219-21.10.1007/s10853-005-5712-3 ↗
25. J. Pons, C. Seguí, V.A. Chernenko, E. Cesari, P. Ochin, and R. Portier: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 315-19.10.1016/S0921-5093(99)00363-9 ↗
26. V.A. Chernenko, E. Cesari, J. Pons, and C. Seguí: J. Mater. Res., 2000, vol. 15, pp. 1496-1504.10.1557/JMR.2000.0215 ↗