journal article·2009-02

Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2

V.C. Srivastava, K.B. Surreddi, V. Uhlenwinkel, A. Schulz, J. Eckert, H.-W. Zoch

Publisher page

Abstract

In the present investigation, a multicomponent glass-forming Al83Y5La5Ni5Co2 (at. pct) alloy was spray deposited on a copper substrate to produce an 8-mm-thick plate. The substrate was 30-mm thick and heated to a temperature of 160 °C prior to spray deposition. The temperature of the substrate and the deposit was measured during and after deposition. The deposits as well as oversprayed powders were characterized in terms of the microstructural features by optical microscopy and scanning electron microscopy (SEM). The phase constitution and transformation were studied by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The oversprayed powder revealed different microstructural characteristics showing crystalline, partially crystalline, and fully featureless particles. The spray deposit showed large fraction of featureless regions with embedded dendrites of 1- to 10-μm size intermetallic phases. These regions were observed to have a nanocrystalline structure with an average grain size of approximately 100 nm. The XRD analysis also revealed the nanocrystallinity in terms of a halo and peak broadening. These microstructural features have been attributed to the deposition of undercooled liquid on a highly conductive copper substrate and rapid heat extraction from the droplets due to proper metallic contact between the deposit and the substrate. These results have been discussed in light of processing conditions and the microstructural evolution of droplets in flight and during deposition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Material Dynamics and Properties · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A. Inoue: Progr. Mater. Sci., 1998, vol. 43, pp. 365–52010.1016/S0079-6425(98)00005-X ↗
2. T. Laha, A. Agarwal, T. McKechnie, K. Rea, S. Seal: Acta Mater., 2005, vol. 53, pp. 5429–3810.1016/j.actamat.2005.08.027 ↗
3. W.L. Johnson: JOM, 2002, vol. 54, pp. 40–4310.1007/BF02822619 ↗
4. J.H. Perepezko and R.J. Hebert: JOM, vol. 54, pp. 34–3910.1007/BF02822618 ↗
5. D.V. Louzguine-Luzgin, A. Inoue: J. Alloys Compd., 2005, vol. 399, pp. 78–8510.1016/j.jallcom.2005.02.018 ↗
6. J.C. Li, Z.K. Zhao, Q. Jiang: Mater. Sci. Eng. A, 2003, vol. 339A, pp. 205–08
7. Y. Liu, Z. Liu, S. Guo, Y. Du, B. Huang, J. Huang, S. Chen, F. Liu: Intermetallics, 2005, vol. 13, pp. 393–9810.1016/j.intermet.2004.07.026 ↗
8. A. Inoue, K. Kita, K. Ohtera, H. Kimura, T. Masumoto: J. Mater. Sci. Lett., 1988, vol. 7, pp. 1287–9010.1007/BF00719960 ↗
9. O.N. Senkov, S.V. Senkov, J.M. Scott, D.B. Miracle: Mater. Sci. Eng. A, 2005, vol. 393A, pp. 12–2110.1016/j.msea.2004.09.061 ↗
10. M. Oguchi, A. Inoue, H. Yamaguchi, T. Masumoto: J. Mater. Sci. Lett., 1991, vol. 10, pp. 289–9110.1007/BF00735660 ↗
11. C.R.M. Afonso, C. Bolfarini, C.S. Kiminami, N.D. Bassim, M.J. Kaufman, M.F. Amateau, T.J. Eden, J. M. Galbraith: J. Non-Cryst. Solids, 2001, vol. 284, pp. 134–3810.1016/S0022-3093(01)00392-1 ↗
12. C.R.M. Afonso, C. Bolfarini, C.S. Kiminami, N.D. Bassim, M.J. Kaufman, M.F. Amateau, T.J. Eden, J.M. Galbraith: Scripta Mater., 2001, vol. 44, pp. 1625–2810.1016/S1359-6462(01)00787-4 ↗
13. M.L. Ted Guo, Chi Y.A. Tsao, J.C. Huang, and J.S.C. Jang: Intermetallics, 2006, vol. 14, pp. 1069–7410.1016/j.intermet.2006.01.041 ↗
14. M.L. Ted Guo, Chi Y.A. Tsao, J.C. Huang, and J.S.C. Jang: Mater. Sci. Eng. A, 2005, vol. 404A, pp. 49–5610.1016/j.msea.2005.05.088 ↗
15. K.F. Chang, M.-L.T. Guo, R.H. Kong, Chi Y.A. Tsao, J.C. Huang, and J.S.C. Jang: Mater. Sci. Eng. A, 2008, vol. 477A, pp. 58–6210.1016/j.msea.2007.09.079 ↗
16. A. Schneider, V.C. Srivastava, V. Uhlenwinkel, K. Bauckhage: Z. Metallkd., 2004, vol. 95, pp. 763–6810.3139/146.018019 ↗
17. H.P. Klug, L.E. Alexander: X-Ray Diffraction Procedures, 2nd ed., John Wiley & Sons, New York, NY, 1974, pp. 656–65
18. D.V. Louzguine, A. Inoue: J. Light Met., 2001, vol. 1, pp. 105–0910.1016/S1471-5317(01)00003-7 ↗
19. S.K. Das, J.H. Perepezko, R.I. Wu, G. Wilde: Mater. Sci. Eng. A, 2001, vol. 304–306A, pp. 159–6510.1016/S0921-5093(00)01483-0 ↗
20. D.V. Louzguine, A. Inoue: J. Non-Cryst. Solids, 2002, vol. 311, pp. 281–9310.1016/S0022-3093(02)01375-3 ↗
21. J.H. Perepezko, R.J. Hebert, W.S. Tong: Intermetallics, 2002, vol. 10, pp. 1079–8810.1016/S0966-9795(02)00144-9 ↗
22. M. Gögebakan: J. Light Met., 2002, vol. 2, pp. 271–7510.1016/S1471-5317(03)00011-7 ↗
23. Y. Kawamura, H. Mano, A. Inoue: Scripta Mater., 2001, vol. 44, pp. 1599–60410.1016/S1359-6462(01)00781-3 ↗
24. E.J. Lavernia, Y. Wu: Spray Atomization and Deposition, John Wiley and Sons, West Sussex, England, 1996, pp. 155–260
25. P.S. Grant: Progr. Mater. Sci., 1995, vol. 39, pp. 497–54510.1016/0079-6425(95)00004-6 ↗
26. V.C. Srivastava, R.K. Mandal, S.N. Ojha, K. Venkateswarlu: Mater. Sci. Eng. A, 2007, vol. 471, pp. 38–4910.1016/j.msea.2007.04.109 ↗
27. V.C. Srivastava, R.K. Mandal, S.N. Ojha: Mater. Sci. Eng. A, 2004, vol. 383, pp. 14–2010.1016/j.msea.2004.02.031 ↗
28. P. Shukla, R.K. Mandal, S.N. Ojha: Bull. Mater. Sci., 2001, vol. 24, pp. 547–5410.1007/BF02706729 ↗
29. N.J.E. Adkins, P. Tsakiropoulos: Mater. Sci. Eng. A, 1991, vol. 133, pp. 767–7010.1016/0921-5093(91)90182-M ↗
30. W.J. Boettinger and J.H. Perepezko: Rapidly Solidified Crystalline Alloys, S.K. Das, B.H. Kear, and C.M. Adams, eds., AIME, Warrendale, PA, 1985, pp. 21–60
31. J.H. Perepezko, J.L. Sebright, P.G. Hoeckel, G. Wilde: Mater. Sci. Eng. A, 2002, vol. 326, pp. 144–5310.1016/S0921-5093(01)01430-7 ↗
32. R.W. Cahn and A.L. Greer: Physical Metallurgy, 4th ed., R.W. Cahn, P. Hassen, eds., Elsevier Science, Amsterdam, The Netherlands, 1996, vol. II, pp. 1726–29
33. D.M. Herlach, D. Holland-Moritz, P. Galenko: Metastable Solids from Undercooled Melts, Pergamon Materials Series, Elsevier Science, Amsterdam, The Netherlands, 2007, pp. 59–105
34. N. Mehdizadeh, M. Lamontagne, C. Moreau, S. Chandra, J. Mostaghini: J. Therm. Spray Technol., 2005, vol. 14, pp. 354–6110.1361/105996305X59422 ↗
35. J. Cedelle, M. Vardelle, P. Fauchais: Surf. Coat. Technol., 2006, vol. 201, pp. 1373–8210.1016/j.surfcoat.2006.02.003 ↗
36. V. Pershin, M. Lufitha, S. Chandra, J. Mostaghimi: J. Therm. Spray Technol., 2003, vol. 12, pp. 370–7610.1361/105996303770348249 ↗