journal article·2012-02

The Kinetics of the Nitriding of Ternary Fe-2 at pct Cr-2 at pct Ti Alloy

K. S. Jung, R. E. Schacherl, E. Bischoff, E. J. Mittemeijer

Publisher page

Abstract

The mechanism and the kinetics of growth of the nitrided zone of ternary Fe-2 at pct Cr-2 at pct Ti alloy was investigated by performing gaseous nitriding experiments at temperatures of 833 K and 853 K (560 °C and 580 °C) and at nitriding potentials r N = 0.004 atm−1/2 and 0.054 atm−1/2. The microstructure of the nitrided zone was investigated by transmission electron microscopy and the elemental compositional variation with depth was determined by employing electron probe microanalysis. Fine platelet-type mixed Cr1 – x Ti x N nitride precipitates developed in the nitrided zone. To describe the evolution of the nitrogen concentration depth profile, a numerical model was developed with the following parameters: the surface nitrogen content, the solubility product(s) of the alloying elements and dissolved nitrogen in the ferrite matrix, and a parameter defining the composition of the inner nitride precipitates. These parameters were determined by fitting model-calculated nitrogen depth profiles to the corresponding experimental data. The results obtained demonstrate that the type of nitride formation (i.e., whether Cr and Ti precipitate separately, as CrN and TiN, or jointly, as mixed Cr1 – x Ti x N) as well as the amounts of mobile and immobile excess nitrogen taken up by the specimen considerably influence the shape and extent of the nitrogen concentration profiles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. S. Lampman: ASM Handbook, vol. 4, ASM International, Materials Park, OH, 1991, pp. 259-67.
2. H. Ferkel, M. Glatzer, Y. Estrin, R.Z. Valiev, C. Blawert, and B.L. Mordike: Mater. Sci. Eng. A, 2003, vol. A348, pp. 100-10.10.1016/S0921-5093(02)00687-1 ↗
3. M. Pellizzari, A. Molinari, and G. Straffelini: Mater. Sci. Eng. A, 2003, vol. A352, pp. 186-94.10.1016/S0921-5093(02)00867-5 ↗
4. N. Limodin and Y. Verreman: Mater. Sci. Eng. A, 2006, vols. A435–436, pp. 460–67.10.1016/j.msea.2006.07.034 ↗
5. A. Basu, J.D. Majumdar, S.G. Chowdhury, P.K. Ajikumar, P. Shankar, A.K. Tyagi, B. Raj, and I. Manna: Surf. Coat. Technol., 2007, vol. 201, pp. 6985-92.10.1016/j.surfcoat.2007.01.004 ↗
6. T. Hirsch, T.G.R. Clarke, and A. da Silva Rocha: Surf. Coat. Technol., 2007, vol. 201, pp. 6380-86.10.1016/j.surfcoat.2006.12.005 ↗
7. S. Jegou, L. Barrallier, and R. Kubler: Acta Mater., 2010, vol. 58 pp. 2666-76.10.1016/j.actamat.2009.12.053 ↗
8. G. Miyamoto, A. Yonemoto, Y. Tanaka, T. Furuhara, and T. Maki: Acta Mater., 2006, vol. 54, pp. 4771-79.10.1016/j.actamat.2006.06.006 ↗
9. G. Miyamoto, A. Yonemoto, Y. Tanaka, T. Maki, and T. Furuhara: ISIJ Int., 2009, vol. 49, pp. 1801-05.10.2355/isijinternational.49.1801 ↗
10. B. Mortimer, P. Grieveson, and K.H. Jack: Scand. J. Metall., 1972, vol. 1, pp. 203-09.
11. K.H. Jack: Proc. Heat Treatment Conf. London, 1973, TMS, London, UK, 1975, pp. 39–50.
12. B.J. Lightfoot and D.H. Jack: Proc. Heat Treatment Conf. London 1973, TMS, London, UK, 1975, pp. 59–65.
13. R.E.E. Pulkkinen: Scand. J. Metall., 1983, vol. 12, pp. 87-92.
14. R.E. Schacherl, P.C.J. Graat, and E.J. Mittemeijer: Z. Metallkd., 2002, vol. 93, pp. 468-77.10.3139/146.020468 ↗
15. R.E. Schacherl, P.C.J. Graat, and E.J. Mittemeijer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3387-98.10.1007/s11661-004-0175-8 ↗
16. S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer: Mater. Sci. Technol., 2005, vol. 21, pp. 113-24.10.1179/174328405X16289 ↗
17. S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer: J. Mater. Sci., 2008, vol. 43, pp. 2618-24.10.1007/s10853-008-2473-9 ↗
18. S.S. Hosmani, R.E. Schacherl, L.L. Dobrzyńska, and E.J. Mittemeijer: Phil. Mag., 2008, vol. 88, pp. 2411-26.10.1080/14786430802345660 ↗
19. H.H. Podgurski, R.A. Oriani, and F.N. Davis: Trans. TMS-AIME, 1969, vol. 245, p. 1603.
20. H.H. Podgurski and H.E. Knechtel: Trans. TMS-AIME, 1969, vol. 245, pp. 1595-1602.
21. M.H. Biglari, C.M. Brakman, M.A.J. Somers, W.G. Sloof, E.J. Mittemeijer, and S. Van Der Zwaag: Z. Metallkd., 1993, vol. 84, pp. 124-31.
22. M.H. Biglari, C.M. Brakman, E.J. Mittemeijer, and S. Van Der Zwaag: Phil. Mag. A, 1995, vol. 72, pp. 1281-99.10.1080/01418619508236255 ↗
23. M.H. Biglari, C.M. Brakman, E.J. Mittemeijer, and S. Van Der Zwaag: Phil. Mag. A, 1995, vol. 72, pp. 931-47.10.1080/01418619508239945 ↗
24. H.J. Spies, H. Biermann, and A. Fischer: Z. Metallkd., 2005, vol. 96, pp. 781-86.10.3139/146.101102 ↗
25. W.D. Welch and S.H. Carpenter: Acta Metall., 1973, vol. 21, pp. 1169-79.10.1016/0001-6160(73)90033-3 ↗
26. M. Pope, P. Grieveson, and K.H. Jack: Scand. J. Metall., 1973, vol. 2, pp. 29-34.
27. A. Krawitz: Scripta Metall., 1977, vol. 11, pp. 117-22.10.1016/0036-9748(77)90289-7 ↗
28. M.M. Yang and A.D. Krawitz: Metall. Trans. A, 1984, vol. 15A, pp. 1545-54.10.1007/BF02657793 ↗
29. S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer: Acta Mater., 2005, vol. 53, pp. 2069-79.10.1016/j.actamat.2005.01.019 ↗
30. S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer: Acta Mater., 2006, vol. 54, pp. 2783-92.10.1016/j.actamat.2006.02.017 ↗
31. A.R. Clauss, E. Bischoff, R.E. Schacherl, and E.J. Mittemeijer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1923-34.10.1007/s11661-009-9865-6 ↗
32. K.S. Jung, R.E. Schacherl, E. Bischoff, and E.J. Mittemeijer: Surf. Coat. Technol., 2010, vol. 204, pp. 1942-46.10.1016/j.surfcoat.2009.08.031 ↗
33. K.S. Jung, R.E. Schacherl, E. Bischoff, and E.J. Mittemeijer: HTM J. Heat Treatm. Mat., 2010, vol. 65, pp. 237-42.10.3139/105.110072 ↗
34. P.M. Hekker, H.C.F. Rozendaal, and E.J. Mittemeijer: J. Mater. Sci., 1985, vol. 20, pp. 718-29.10.1007/BF01026547 ↗
35. Y. Sun and T. Bell: Mater. Sci. Eng. A, 1997, vol. A224, pp. 33-47.10.1016/S0921-5093(96)10561-X ↗
36. J.D. Kamminga and G.C.A.M. Janssen: Surf. Coat. Technol., 2005, vol. 200, pp. 909-12.10.1016/j.surfcoat.2005.01.066 ↗
37. J.D. Kamminga and G.C.A.M. Janssen: Surf. Coat. Technol., 2006, vol. 200, pp. 5896-5901.10.1016/j.surfcoat.2005.09.002 ↗
38. K. Bongartz, D.F. Lupton, and H. Schuster: Metall. Trans. A, 1980, vol. 11A, pp. 1883-93.10.1007/BF02655105 ↗
39. K. Bongartz, W.J. Quadakkers, R. Schulten, and H. Nickel: Metall. Trans. A, 1989, vol. 20A, pp. 1021-28.10.1007/BF02650138 ↗
40. J. Crank: The Mathematics of Diffusion, Clarendon Press, Oxford, UK, 1970.
41. E.J. Mittemeijer and J.T. Slycke: Surf. Eng., 1996, vol. 12, pp. 152-62.10.1179/sur.1996.12.2.152 ↗
42. E.J. Mittemeijer and M.A.J. Somers: Surf. Eng., 1997, vol. 13, pp. 483-97.10.1179/sur.1997.13.6.483 ↗
43. J.L. Pouchou and F. Pichoir: Rech. Aerosp., 1984, pp. 167–92.
44. A. Armigliato, L. Dori, A. Garulli, and P. Venturi: J. Microsc. Spectrosc. Electron., 1982, vol. 7, pp. 593-603.
45. N.E. Vives Diaz, S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer: Acta Mater., 2008, vol. 56, pp. 4137-49.10.1016/j.actamat.2008.04.041 ↗
46. J.D. Fast and M.B. Verrijp: J. Iron Steel Inst., 1954, vol. 126, pp. 24-27.
47. D.S. Rickerby, S. Henderson, A. Hendry, and K.H. Jack: Acta Metall., 1986, vol. 34, pp. 1687-99.10.1016/0001-6160(86)90116-1 ↗
48. D.H. Kirkwood, O.E. Atasoy, and S.R. Keown: Met. Sci., 1974, vol. 8, pp. 49-55.10.1016/0036-9748(74)90438-4 ↗
49. M. Nasr Eddine, E.F. Bertaut, and M. Maunaye: Acta Cryst., 1977, vol. B33, pp. 2696-98.10.1107/S0567740877009261 ↗
50. W. Lengauer, S. Binder, K. Aigner, P. Ettmayer, A. Guillou, J. Debuigne, and G. Groboth: J. Alloys. Compd., 1995, vol. 217, pp. 137-47.10.1016/0925-8388(94)01315-9 ↗
51. H.C.F. Rozendaal, E.J. Mittemeijer, P.F. Colijn, and P.J. Van Der Schaaf: Metall. Trans. A, 1983, vol. 14A, pp. 395-99.10.1007/BF02644217 ↗
52. P.B. Friehling, F.W. Poulsen, and M.A.J. Somers: Z. Metallkd., 2001, vol. 92, pp. 589-95.
53. M.A.J. Somers, R.M. Lankreijer, and E.J. Mittemeijer: Phil. Mag. A, 1989, vol. 59, pp. 353-78.10.1080/01418618908205064 ↗